Fitbit

s199

Hello, thank you for that nice addon…i finally managed to make it work (exemple code is still incorrect on github…) but there is a problem, im using an alta hr and i only have the “steps” info on display, everything else is set to 0 :/
Any idea how i can fix that ?

Sandy2503

The Modul wont work on my Mirror too.
First:
In the moment i haven`t any Fitbit Hardware. I use the Fitbit -App on my WindowsPhone. I can see in the App all useful things like step etc. and the data will sync with the Fitbit webservce.
I can see all activitys an the Mirror with a Zero …

When i stop the mirror with
pm2 stop mm and try to start the python script setupAccess.py from the local terminal so i can see this:

//your code here
sudo python setupAccess.py
Get credentials from credentials.ini ? (Y/N)
y
{"message": "credentials.ini exists", "type": "status"}
{"message": "Reading from crentials.ini", "type": "status"}
{"message": "Read of credentials.ini successful.", "type": "status"}
[19/Sep/2017:19:30:03] ENGINE Listening for SIGHUP.
[19/Sep/2017:19:30:03] ENGINE Listening for SIGTERM.
[19/Sep/2017:19:30:03] ENGINE Listening for SIGUSR1.
[19/Sep/2017:19:30:03] ENGINE Bus STARTING
CherryPY Checker:
The Application mounted at '' has an empty config.

[19/Sep/2017:19:30:03] ENGINE Started monitor thread 'Autoreloader'.
[19/Sep/2017:19:30:03] ENGINE Started monitor thread '_TimeoutMonitor'.
[19/Sep/2017:19:30:03] ENGINE Serving on http://127.0.0.1:8080
[19/Sep/2017:19:30:03] ENGINE Bus STARTED

and not more - and no prompt …

when i now from a second terminal the mirror restart with pm2 restart mm
i see on the mirror only:

//your code here
```Traceback (most recent call last):
  File "/usr/local/lib/python2.7/dist-packages/cherrypy/_cprequest.py", line 670, in respond
    response.body = self.handler()
  File "/usr/local/lib/python2.7/dist-packages/cherrypy/lib/encoding.py", line 217, in __call__
    self.body = self.oldhandler(*args, **kwargs)
  File "/usr/local/lib/python2.7/dist-packages/cherrypy/_cpdispatch.py", line 67, in __call__
    raise sys.exc_info()[1]
HTTPError: (404, `Missing parameters: state`)

CherryPy 3.8.2

Can anyone help me to fix the problem ?

Greetz Sandy2503

stephenmelody

@s199 I also have this problem, only Steps is coming through. Did you manage to get it fixed?

stephenmelody

This is my output of getData.py

pi@Magic-Mirror:~/MagicMirror/modules/MMM-fitbit/python $ sudo python getData.py
{"message": "credentials.ini exists", "type": "status"}
{"message": "Reading from credentials.ini", "type": "status"}
{"message": "Read of credentials.ini successful.", "type": "status"}
{"message": "credentials.ini exists", "type": "status"}
{"message": "Reading from credentials.ini", "type": "status"}
{"message": "Read of credentials.ini successful.", "type": "status"}
{"message": "tokens.ini exists", "type": "status"}
{"message": "Reading from tokens.ini", "type": "status"}
{"message": "Read of tokens.ini successful.", "type": "status"}
{"message": "Making API call", "type": "status"}
{"message": "API call okay", "type": "status"}
{"message": "Tokens valid", "type": "status"}
{"values": {"data": 1649, "goal": 10000}, "resource": "steps", "type": "data"}
{"values": {"data": 0, "goal": 1}, "resource": "floors", "type": "data"}
pi@Magic-Mirror:~/MagicMirror/modules/MMM-fitbit/python $

pyrosmiley

For a little ways now, I’ve been running into an issue where, after running for a day or so, the module stops being able to update. It seems that it’s failing --for some odd reason-- to write the new Refresh Token, so when the Access token is expired, it needs to be re-authorized. I’ve looked through the code and I don’t know a whole lot but I cannot figure out why it’s doing what it’s doing. For now, I have this shell script set to run every night, and that seems to keep it running well enough. I’m sure there’s a better way but until I can get around to learning more, the kludgy way will do.

#!/bin/bash

export DISPLAY=:0
pm2 stop MagicMirror
python  ~/MagicMirror/modules/MMM-fitbit/python/setupAccess.py
killall chromium-browser
pm2 start MagicMirror

exit 0

The first line is there so that it can be run manually over SSH. I did have to log in manually once, but I just told chromium to remember me, so now I don’t have to do anything to re-grant access.

If anyone has a better fix, I’d love to hear your thoughts!

Sandy2503

Hi.

I start the setupAccess.py and i have got an Error from Chromium Browser.

In the Message stands the the Chromium Browser starts as normal user and not as root.

How can i fix it ?

Sandy

MattSharp

Has anyone managed to get this installed on a Raspberry Pi Zero W using Jessie Lite?

When running setupAccess.py I can’t get anywhere as it doesn’t open a browser window so I can’t authenticate.

Any help appreciated.

Costi

@pyrosmiley I had the same issue and I could change it by setting new rights for the tokens.ini file. Set the rights for write to all (before this only for root access) and the new token can be written. Update works now, let’ see how long …

Achilles

Hello all,

Newbie here. I know I am late trying to put together a MagicMirror, but I just discovered this! Anyway, I am trying to put this Fitbit module on mine, and I when I run “sudo python setupAccess.py”, I get a “python: can’t open file ‘setupAccess.py’: [Errno 2] No such file or directory” error.

I am not sure where I have gone wrong here, as I have followed the instructions thus far found here:

https://github.com/SVendittelli/MMM-fitbit/blob/master/README.md

Any ideas?

Thanks.

Achilles

I fixed it. Newbie mistake, I was in the wrong directory when I tried to excute the command. Having problems now trying to get my steps to show, so I have pouring over all of the info here in the forum…thanks to all who have posted here