Error performing TLS handshake: An unexpected TLS packet was received

Keudn · Dec 16, 2019, 10:40 PM

Hi all,
I am trying to set Magic Mirror 2 up on my Pi Zero W following Emmanuel Contreras’s guide found here http://emmanuelcontreras.com/how-to/how-to-create-a-magic-mirror-2-with-pi-zero-w/. I followed the instructions up until making the two start scripts, where I deviated slightly and used midori instead of chromium as in this guide https://www.magicmirrorcentral.com/magic-mirror-raspberry-pi-zero/. When I restart my Pi, Midori opens but gives me a “Error- https://localhost:8080 Error performing TLS handshake: An unexpected TLS packet was received” message. Does anyone have a solution to this? I don’t seem to be getting any errors in the console, and accessing the Mirror from my PC’s web browser opens it correctly, so it is an issue with Midori.

Keudn · Dec 17, 2019, 6:18 AM

@sdetweil Ahh, that did it. Reverted the run-start.sh script and switched to Graphical auto-login mode and that did the trick. Thank you for your help!

sdetweil · Dec 17, 2019, 1:23 AM

@Keudn I don’t know. But I would try the updated installer.

See here
https://forum.magicmirror.builders/topic/10171/anyone-want-to-try-updated-installer

Keudn · Dec 17, 2019, 1:23 AM

@sdetweil I’m not sure how to use it, do I just run the command?

sdetweil · Dec 17, 2019, 1:25 AM

@Keudn rename the MagicMirror folder to something else and then run the command.

it will do all the work…
(this is just an updated version of the same command in the MM readme and on the github site)

it will prompt if u want to use pm2 to autostart at boot
and ask if u want to turn off screen saver

Keudn · Dec 17, 2019, 2:43 AM

@sdetweil I renamed the old Magic Mirror folder and ran the command. It seemed to install correctly, but when it boots I get a “Please create a config file” message even though I copied the one I had from the old folder over and installed the modules again. I am also still getting the Midori error first, so it seems like the previous install is still trying to start.

sdetweil · Dec 17, 2019, 3:06 AM

@Keudn do a
pm2 status
Command. Check the paths and commands

My setup starts chrome for the browser on pi 0.

For the config, run

npm check:config

From the MagicMirror folder.

If that is ok
Then do npm start to see any node_helper errors

Keudn · Dec 17, 2019, 3:28 AM

@sdetweil pm2 status gives me two ids, MagicMirror and mmstart. I’m assuming MagicMirror is the one your script creates. When I try and run pm2 stop I just get “Process not found” error and can’t actually disable it.

Running npm check:config doesn’t seem to be a valid command as it gives me a usage list and asks if I meant “config”.

Doing npm start gives this output

$ npm start

> magicmirror@2.10.0-develop start /home/pi/MagicMirror
> ./run-start.sh

0 [LOG] Starting MagicMirror: v2.10.0-develop
0 [LOG] Loading config ...
[21:27:45.455] [ERROR]  WARNING! Could not validate config file. Starting with default configuration. Please correct syntax errors at or above this line: /home/pi/MagicMirror/config/config.js:87
*               {
^

SyntaxError: Unexpected token *
    at Module._compile (internal/modules/cjs/loader.js:721:23)
    at Object.Module._extensions..js (internal/modules/cjs/loader.js:787:10)
    at Module.load (internal/modules/cjs/loader.js:653:32)
    at tryModuleLoad (internal/modules/cjs/loader.js:593:12)
    at Function.Module._load (internal/modules/cjs/loader.js:585:3)
    at Module.require (internal/modules/cjs/loader.js:690:17)
    at require (internal/modules/cjs/helpers.js:25:18)
    at loadConfig (/home/pi/MagicMirror/js/app.js:67:12)
    at App.start (/home/pi/MagicMirror/js/app.js:208:3)
    at Object.<anonymous> (/home/pi/MagicMirror/serveronly/index.js:2:5)
[21:27:45.484] [LOG] Loading module helpers ...
[21:27:45.825] [LOG] Initializing new module helper ...
[21:27:45.836] [LOG] Module helper loaded: updatenotification
[21:27:45.853] [LOG] No helper found for module: helloworld.
0 [LOG] All module helpers loaded.
[21:27:45.871] [LOG] Starting server on port 8080 ...
0 [LOG] Server started ...
0 [LOG] Connecting socket for: updatenotification
0 [LOG] Sockets connected & modules started ...
0 [LOG]
Ready to go! Please point your browser to: http://localhost:8080
Starting chromium browser now, have patience, it takes a minute
[21:27:46.284] [ERROR]  { Error: listen EADDRINUSE: address already in use 127.0.0.1:8080
    at Server.setupListenHandle [as _listen2] (net.js:1279:14)
    at listenInCluster (net.js:1327:12)
    at GetAddrInfoReqWrap.doListen [as callback] (net.js:1460:7)
    at GetAddrInfoReqWrap.onlookup [as oncomplete] (dns.js:61:10)
  code: 'EADDRINUSE',
  errno: 'EADDRINUSE',
  syscall: 'listen',
  address: '127.0.0.1',
  port: 8080 }
Created new window in existing browser session.

sdetweil · Dec 17, 2019, 3:46 AM

@Keudn pm2 stop 0 or 1 ( or use there name)
pm2 delete 0 or 1

Edit the config and fix line 86 with that *

Keudn · Dec 17, 2019, 4:15 AM

@sdetweil Got the mmstart process deleted, but now the mirror hangs at the booting up screen with the command line on the top. I can access it correctly from a browser on another computer, so it looks like it just isn’t opening a web browser locally on the Pi.

sdetweil · Dec 17, 2019, 5:32 AM

@Keudn the new run-start.sh script is waiting for the server process to say its ready
then it starts the browser

u should be able to test it

~/MagicMirror
bash -x run-start.sh

starts mm in serveronly mode (on pi 0)

loops reading console output, waiting for the message
“point\ your\ browser”
then launches chromium-browser

but if that message doesn’t come… it will be hung…

so, try

~/MagicMirror
node serveronly

should look like this (with your module list)

~/MagicMirror$ node serveronly
[23:31:31.854] [LOG]    Starting MagicMirror: v2.10.0-develop
[23:31:31.865] [LOG]    Loading config ...
[23:31:31.871] [LOG]    Loading module helpers ...
[23:31:31.874] [LOG]    No helper found for module: alert.
[23:31:31.925] [LOG]    Initializing new module helper ...
[23:31:31.925] [LOG]    Module helper loaded: updatenotification
[23:31:31.927] [LOG]    No helper found for module: clock.
[23:31:31.928] [LOG]    No helper found for module: currentweather.
[23:31:31.929] [LOG]    No helper found for module: weatherforecast.
[23:31:32.508] [LOG]    Initializing new module helper ...
[23:31:32.509] [LOG]    Module helper loaded: newsfeed
[23:31:32.759] [LOG]    Initializing new module helper ...
[23:31:32.760] [LOG]    Module helper loaded: MMM-CalendarExt2
[23:31:32.771] [LOG]    handler helper in init
[23:31:32.772] [LOG]    Module helper loaded: ImageService
[23:31:34.273] [LOG]    scheduler helper in init
[23:31:34.273] [LOG]    Module helper loaded: ImageScheduler
[23:31:34.274] [LOG]    All module helpers loaded.
[23:31:34.275] [LOG]    Starting server on port 8080 ...
[23:31:34.281] [INFO]   You're using a full whitelist configuration to allow for all IPs
[23:31:34.288] [LOG]    Server started ...
[23:31:34.289] [LOG]    Connecting socket for: updatenotification
[23:31:34.290] [LOG]    Connecting socket for: newsfeed
[23:31:34.290] [LOG]    Starting module: newsfeed
[23:31:34.291] [LOG]    Connecting socket for: MMM-CalendarExt2
[23:31:34.291] [LOG]    Connecting socket for: ImageService
[23:31:34.292] [LOG]    handler helper in start
[23:31:34.292] [LOG]    Connecting socket for: ImageScheduler
[23:31:34.293] [LOG]    scheduler helper in start
[23:31:34.293] [LOG]    Sockets connected & modules started ...
[23:31:34.293] [LOG]
Ready to go! Please point your browser to: http://localhost:8080