Can't log in using default password...

sdetweil · Feb 16, 2020, 8:59 PM

@Turtle i understand, but don’t have any ideas for you…

maybe edit the /boot/config.txt on another machine and set to autologon for user pi…
then u can change the password

Turtle · Feb 17, 2020, 12:06 AM

Thank you @sdetweil, I’m just frustrating! I’m very new but I normally understand this stuff. I was working on this years ago but then stopped and just a few days ago decided to give it another shot and was updating everything which worked but couldn’t get Magic Mirror to work. So, I tried something someone posted on here and now I’m stuck. It’s looking like I have to reformat and do everything over again? Just frustrating and stuff.

Turtle · Feb 17, 2020, 2:40 AM

My common sense side actually won out. Decided to just reformat everything and start over. The last time I used this Raspberry Pi was literally like 1.5 years or so ago. So, I originally downloaded the Raspbian Sketch and saw that the latest was Buster. Plus, the same thing for MagicMirror. Better to just start fresh.

sdetweil · Feb 17, 2020, 3:19 AM

@Turtle use my install script

See https://github.com/sdetweil/MagicMirror_scripts/blob/master/README.md

Turtle · Feb 17, 2020, 4:38 AM

Thank you, @sdetweil for your script…do you have any other instructions on your script or PM2? I wasn’t really understanding PM2 but now I do but I don’t want it to start automatically right now until I get it ready. I’ll continue my search. Again, thank you.

sdetweil · Feb 17, 2020, 1:16 PM

@Turtle no more info… pm2 will allow you to setup restart on boot when u want… here is the doc
https://www.npmjs.com/package/pm2

to add it later, use the fixuppm2 script

Turtle · Feb 17, 2020, 6:15 PM

@sdetweil Thank you again!

Turtle · Feb 17, 2020, 11:35 PM

@sdetweil - What do you mean by “to add it later”? When I ran your first script, it added the pm2. Does the fixuppm2 script update pm2 or just installs it? If I already have it, I don’t need to run the script, correct?

sdetweil · Feb 17, 2020, 11:47 PM

@Turtle correct, if you have it already, don’t need to do it again

add it later… you said N during install and now changed your mind…
run the fixup script to add it and make it work…

same for the screen saver script… you said N during install and changed your mind…

Turtle · Feb 18, 2020, 1:23 AM

@sdetweil, Thank you! I ran the scripts during the original install.