MMM-EFA Config

lavolp3

@rxlDavid Can’t find any errors in the config entry.

Do the following to debug:

include the config entry, and try the following in the console (directly or via ssh)

cd ~/MagicMirror
npm run config:check

No errors?

Then: Open the mirror window in a browser on your PC, open the DevTools (F12), select the “console” tab and look for errors/red lines

rxlDavid

So I done npm run…:
And thats what I recieved:

> magicmirror@2.11.0 config:check /home/pi/MagicMirror
> node tests/configs/check_config.js

Checking file...  /home/pi/MagicMirror/config/config.js
Line 1 col 156 Trailing spaces not allowed.
Line 95 col 12 Strings must use doublequote.
Line 96 col 25 Strings must use doublequote.
Line 97 col 23 Strings must use doublequote.
Line 99 col 25 Strings must use doublequote.
Line 100 col 25 Strings must use doublequote.
Line 101 col 25 Strings must use doublequote.
Line 109 col 12 Strings must use doublequote.
Line 110 col 14 Strings must use doublequote.
Line 115 col 13 Strings must use doublequote.

The EFA Module starts at Line 109…
How can I open it on a browser?

lavolp3

@rxlDavid You have config errors in the respective lines.
You should use your preferred editor (e.g. nano) and fix them


nano config/config.js

Or post your config.js here but delete every sensitive information!
At least post the first few lines.

lavolp3

@rxlDavid
The errors make it seem like you have a strict mode enabled somehow. Wouldn’t even know how to do that.
Because normally the check would allow training lines and single quotes…

rxlDavid

@lavolp3 said in MMM-EFA Config:

@rxlDavid You have config errors in the respective lines.
You should use your preferred editor (e.g. nano) and fix them
nano config/config.js
Or post your config.js here but delete every sensitive information!
At least post the first few lines.

/* Magic Mirror Config Sample * * By Michael Teeuw http://michaelteeuw.nl * MIT Licensed. * * For more information on how you can configure this file * See 
 https://github.com/MichMich/MagicMirror#configuration * */

var config = {
	address: "localhost", // Address to listen on, can be:
	                      // - "localhost", "127.0.0.1", "::1" to listen on loopback interface
	                      // - another specific IPv4/6 to listen on a specific interface
	                      // - "0.0.0.0", "::" to listen on any interface
	                      // Default, when address config is left out or empty, is "localhost"
	port: 8080,
	ipWhitelist: ["127.0.0.1", "::ffff:127.0.0.1", "::1"], // Set [] to allow all IP addresses
	                                                       // or add a specific IPv4 of 192.168.1.5 :
	                                                       // ["127.0.0.1", "::ffff:127.0.0.1", "::1", "::ffff:192.168.1.5"],
	                                                       // or IPv4 range of 192.168.3.0 --> 192.168.3.15 use CIDR format :
	                                                       // ["127.0.0.1", "::ffff:127.0.0.1", "::1", "::ffff:192.168.3.0/28"],

	useHttps: false, 		// Support HTTPS or not, default "false" will use HTTP
	httpsPrivateKey: "", 	// HTTPS private key path, only require when useHttps is true
	httpsCertificate: "", 	// HTTPS Certificate path, only require when useHttps is true

	language: "de",
	timeFormat: 24,
	units: "metric",
	// serverOnly:  true/false/"local" ,
			     // local for armv6l processors, default
			     //   starts serveronly and then starts chrome browser
			     // false, default for all  NON-armv6l devices
			     // true, force serveronly mode, because you want to.. no UI on this device

	modules: [
		{
			module: "alert",
		},
		{
			module: "updatenotification",
			position: "top_bar"
		},
		{
			module: "clock",
			position: "top_left"
		},
		{
			module: "calendar",
			header: "Kalender",
			position: "top_left",
			config: {
				calendars: [
					{
						symbol: "calendar-check",
						url: "XXXXXXX"					}
				]
			}
		},
		{
			module: "compliments",
			position: "lower_third"
		},
		{
			module: "currentweather",
			position: "top_right",
			config: {
				location: "XXXXXX",
				locationID: "28XXXX", //ID from http://bulk.openweathermap.org/sample/city.list.json.gz; unzip the gz file and find your city
				appid: "XXXXXX"
			}
		},
		{
			module: "weatherforecast",
			position: "top_right",
			header: "Weather Forecast",
			config: {
				location: "XXXXXX",
				locationID: "XXXXXX", //ID from http://bulk.openweathermap.org/sample/city.list.json.gz; unzip the gz file and find your city
				appid: "XXXXXX"
			}
		},
		{
			module: "newsfeed",
			position: "bottom_bar",
			config: {
				feeds: [
					{
						title: "Tagesschau",
						url: "http://www.tagesschau.de/xml/rss2"
					}
				],
				showSourceTitle: true,
				showPublishDate: true,
				broadcastNewsFeeds: true,
				broadcastNewsUpdates: true
			}
		},

		{
			module: 'MMM-Mail',
            		position: 'bottom_left',
            		header: 'Email',
            		config:{
                		user: 'XXXXXX',
                		pass: 'XXXXXX',
                		host: 'XXXXXX',
                		port: 993,
                		numberOfEmails: 5,
                		fade: true,
				subjectlength: 50
 				}
		},
		{
			module: 'MMM-EFA-departures',
			position: 'upper_third',
			config: {
				efaUrl: "http://www2.vvs.de/vvs/XSLT_DM_REQUEST",
				stopID: "XXXXXX",
				stopName: "MMM-EFA is loading",
				lines: ['all'],
				reload: 60000,
				realDepTime: true,
				relativeDepTime: true,
				toggleDepTime: true,
				toggleDepTimePerReload: 6,
				fade: true,
				fadePoint: 0.25,
				maxDepartures: 4
          			}
          	},
	]

};

/*************** DO NOT EDIT THE LINE BELOW ***************/
if (typeof module !== "undefined") {module.exports = config;}

i edit the config via nano…