Read the statement by Michael Teeuw here.
MMM-Trello sometimes fails to refresh. Any ideas?
-
@sdetweil No worries. Thanks for the tip about
pm2 logs
, I actually knew about this, but completely forgot they existed. Maybe others who have noticed this have ideas as well, and we can come up with an answer together!I know just enough about these things to be able to track and fix small issues (that I usually caused), but this is over my head. I just love learning and growing with this stuff! I’ll resort to refreshing for now (I pulled a keyboard/mouse out anyhow to get the logs) and see if I can’t find something.
-
@pattanner92 if u enable ssh on the mirror, then u can connect from your windows machine and get the log info. no keyboard required on mirror
(dev window requires keyboard, but many times PM2 is capturing that too)
-
@sdetweil I used to use this all the time. As a matter of fact, I used to open my mirror on my computer’s browser, and open a ssh connection in terminal and do edits and refresh on the computer as it was faster and my screen is the size of a football field.
Unfortunately (as mentioned in the original post) I work at a University, where we have a large enterprise network with various subnets and gateways. If my iMac and Raspi aren’t on the same subnet there is no way to connect the two. I have tried to change the CIRD format of whitelisted address to allow all sorts of combinations of subnet masking, including allowing everything. We had a power failure a couple days ago, so my Mirror connected to wifi about 36 hours ahead of my computer (I keep my computer disconnected from wifi generally as I have a hard line which allows me to connect to various printers and servers around campus), so they are nowhere near the same subnet. Simply reconnecting my mirror doesn’t help either.
I talked to the guy who manages the network on my campus and he said that if I don’t have the same subnet, there is no way to interconnect the two. He was actually impressed that I even got the Raspi on the wifi to begin with. Technically speaking our campus also routes through the main campus network, which is 100+ miles away, allowing interconnection across all five campuses across the state.
-
@pattanner92 yeh, sorry, read, it and forgot it!
-
@pattanner92 Any luck getting around this error, other than by manual refresh? I have the same EAI_AGAIN errors.
-
@geronimodupree Unfortunately, no. I don’t seem to be getting the issue as much, but since the pandemic has all but halted my job, there haven’t been many changes to my schedules. We have also had a batch of bad weather recently, which resulted in several power failure. Which isn’t hard, since if a squirrel farts on Mars our power goes out. Maybe the constant refreshing has kept the issue at bay.
Sorry I can’t be much help.