MMM-GoogleAssistant help?

[Infinity2437]

@sdetweil it says line 100 column 6 but i dont see anything wrong

[sdetweil]

@infinity2437 because its on line 99

unexpected token

means the previous line did not have a trailing comma

[Infinity2437]

@sdetweil I fixed that one now it says unexpected token node on touch

[sdetweil]

@infinity2437 there are 3 errors… all the same problem

[DJBOOB66]

Well you need to add " , " on a number of lines read WiKi config [http://wiki.bugsounet.fr/en/MMM-GoogleAssistant/Configuration](link url)
and [http://wiki.bugsounet.fr/en/MMM-GoogleAssistant/ConfigurationStructure](link url)

[sdetweil]

@Infinity2437 @djboob66 the text config.js formatting rules are as follows

the thing to the left of : only needs quotes if it contains special characters, like - or .

if the thing to the right of : is a number or true or false, it should not be quoted

otherwise, if the thing to the right contains letters or special chars then it must be quoted
single or double doesn’t matter as long as both ends match

if the thing on the next line starts with a word, see rule part1, then THIS line MUST have a comma at the end, signifying more is coming

[DJBOOB66]

@sdetweil I meant he missing ( , )

[sdetweil]

@djboob66 yes, i said that before, and told him how to find them and fix them

[Infinity2437]

@sdetweil ok now i have a new problem when trying to get MMM-Detection to work and now it says there is an error which is the : in module:

[DJBOOB66]

post config

[Infinity2437]

@djboob66 line 140 column 10

/* Magic Mirror Config Sample
 *
 * By Michael Teeuw https://michaelteeuw.nl
 * MIT Licensed.
 *
 * For more information on how you can configure this file
 * see https://docs.magicmirror.builders/getting-started/configuration.html#general
 * and https://docs.magicmirror.builders/modules/configuration.html
 */
let config = {
	address: "localhost", 	// Address to listen on, can be:
							// - "localhost", "127.0.0.1", "::1" to listen on loopback interface
							// - another specific IPv4/6 to listen on a specific interface
							// - "0.0.0.0", "::" to listen on any interface
							// Default, when address config is left out or empty, is "localhost"
	port: 8080,
	basePath: "/", 	// The URL path where MagicMirror is hosted. If you are using a Reverse proxy
					// you must set the sub path here. basePath must end with a /
	ipWhitelist: ["127.0.0.1", "::ffff:127.0.0.1", "::1"], 	// Set [] to allow all IP addresses
															// or add a specific IPv4 of 192.168.1.5 :
															// ["127.0.0.1", "::ffff:127.0.0.1", "::1", "::ffff:192.168.1.5"],
															// or IPv4 range of 192.168.3.0 --> 192.168.3.15 use CIDR format :
															// ["127.0.0.1", "::ffff:127.0.0.1", "::1", "::ffff:192.168.3.0/28"],

	useHttps: false, 		// Support HTTPS or not, default "false" will use HTTP
	httpsPrivateKey: "", 	// HTTPS private key path, only require when useHttps is true
	httpsCertificate: "", 	// HTTPS Certificate path, only require when useHttps is true

	language: "en",
	locale: "en-US",
	logLevel: ["INFO", "LOG", "WARN", "ERROR"], // Add "DEBUG" for even more logging
	timeFormat: 24,
	units: "metric",
	// serverOnly:  true/false/"local" ,
	// local for armv6l processors, default
	//   starts serveronly and then starts chrome browser
	// false, default for all NON-armv6l devices
	// true, force serveronly mode, because you want to.. no UI on this device

	modules: [
		{
			module: "alert",
		},
		{
			module: "updatenotification",
			position: "top_bar"
		},
		{
			module: "clock",
			position: "top_left"
		},
		{
			module: "calendar",
			header: "US Holidays",
			position: "top_left",
			config: {
				calendars: [
					{
						symbol: "calendar-check",
						url: "webcal://www.calendarlabs.com/ical-calendar/ics/76/US_Holidays.ics"					}
				]
			}
		},
		{
			module: "compliments",
			position: "lower_third"
		},
		{
			module: "weather",
			position: "top_right",
			config: {
				weatherProvider: "openweathermap",
				type: "hourly",
				units: "imperial",
				location: "",
				locationID: "5098135", //ID from http://bulk.openweathermap.org/sample/city.list.json.gz; unzip the gz file and find your city
				apiKey: "YOUR_OPENWEATHER_API_KEY"
			}
		},
		{
			module: "weather",
			position: "top_right",
			header: "Weather Forecast",
			config: {
				weatherProvider: "openweathermap",
				type: "forecast",
				units: "imperial",
				location: "",
				locationID: "5098135", //ID from http://bulk.openweathermap.org/sample/city.list.json.gz; unzip the gz file and find your city
				apiKey: "YOUR_OPENWEATHER_API_KEY"
			}
		},
		{
			module: "MMM-GoogleAssistant",
			position: "bottom_bar",
			configDeepMerge: true,
			config: {
				assistantConfig: {
					lang: "en-US",
					latitude: 40.8614432,
					longitude: -73.9624286
					},
				responseConfig: {
					useFullscreen: false,
					useResponseOutput: true,
					responseOutputCSS: "response_output.css",
					screenOutputTimer: 5000,
					activateDelay: 250,
					useAudioOutput: true,
					useChime: true,
					confirmationChime: true,
					useInformations: true
					},
				Extended: {
					touch: {
						useTouch: true,
						mode: 2
					},
					spotify: {
						usespotify: true,
						player: {
						type: "Raspotify",
						email: "",
						password: 
						minVolume: 10,
						maxVolume: 90,
						usePause: true
						}
					},
					visual: {
						updateInterval: 1000,
						idleInterval: 10000,
						useBottomBar: false,
						CLIENT_ID: "",
						CLIENT_SECRET: "",
					}
				}
			}
		},
			module: "MMM-Detector",
			position: "top_left",
			configDeepMerge: true,
			config: {
				debug: false,
    				autoStart: true,
				useLogos: true,
				micConfig: {
					recorder: "auto",
					device: "default",
					audioGain: 2.0,
					applyFrontend: true // When you use only `snowboy` and `smart_mirror`, `false` is better. But with other models, `true` is better.
    				},
			newLogos: {
				default: "default.png"
			},
			detectors: [
				{
				detector: "Snowboy",
				Model: "jarvis",
				Sensitivity: null,
				Logo: "google",
				autoRestart: false,
				onDetected: {
					notification: "GA_ACTIVATE"
				}
			},
				{
				detector: "Porcupine",
				Model: "ok google",
				Sensitivity: null,
				Logo: "google",
				autoRestart: false,
				onDetected: {
					notification: "GA_ACTIVATE"
				}
			},
				{
				detector: "Porcupine",
				Model: "hey google",
				Sensitivity: null,
				Logo: "google",
				autoRestart: false,
				onDetected: {
					notification: "GA_ACTIVATE"
					}
				}
			],
			NPMCheck: {
				useChecker: true,
				delay: 10 * 60 * 1000,
				useAlert: true
			}
		}
	}

	]
};

/*************** DO NOT EDIT THE LINE BELOW ***************/
if (typeof module !== "undefined") {module.exports = config;}

[DJBOOB66]

@infinity2437 You should read the Wiki mate
you have

},
			module: "MMM-Detector",
			position: "top_left",
			configDeepMerge: true

should be

},
{
			module: "MMM-Detector",
			position: "top_left",
			configDeepMerge: true

[Infinity2437]

@djboob66 thank you so much it finally works