unexpected token

[adamhrastich]

‘’'* Magic Mirror Config Sample
*

• By Michael Teeuw https://michaelteeuw.nl

• MIT Licensed.

• For more information on how you can configure this file

• see https://docs.magicmirror.builders/getting-started/configuration.html#general

• and https://docs.magicmirror.builders/modules/configuration.html
  */
  let config = {
  address: “localhost”, // Address to listen on, can be:
  // - “localhost”, “127.0.0.1”, “::1” to listen on loopback interface
  // - another specific IPv4/6 to listen on a specific interface
  // - “0.0.0.0”, “::” to listen on any interface
  // Default, when address config is left out or empty, is “localhost”
  port: 8080,
  basePath: “/”, // The URL path where MagicMirror is hosted. If you are using a Reverse proxy
  // you must set the sub path here. basePath must end with a /
  ipWhitelist: [“127.0.0.1”, “::ffff:127.0.0.1”, “::1”], // Set [] to allow all IP addresses
  // or add a specific IPv4 of 192.168.1.5 :
  // [“127.0.0.1”, “::ffff:127.0.0.1”, “::1”, “::ffff:192.168.1.5”],
  // or IPv4 range of 192.168.3.0 --> 192.168.3.15 use CIDR format :
  // [“127.0.0.1”, “::ffff:127.0.0.1”, “::1”, “::ffff:192.168.3.0/28”],

  useHttps: false, // Support HTTPS or not, default “false” will use HTTP
  httpsPrivateKey: “”, // HTTPS private key path, only require when useHttps is true
  httpsCertificate: “”, // HTTPS Certificate path, only require when useHttps is true

  language: “en”,
  locale: “en-US”,
  logLevel: [“INFO”, “LOG”, “WARN”, “ERROR”], // Add “DEBUG” for even more logging
  timeFormat: 12,
  units: “imperial”,
  // serverOnly: true/false/“local” ,
  // local for armv6l processors, default
  // starts serveronly and then starts chrome browser
  // false, default for all NON-armv6l devices
  // true, force serveronly mode, because you want to… no UI on this device

  modules: [
  {
  module: “alert”,
  },
  {
  module: “updatenotification”,
  position: “top_bar”
  },
  {
  module: “clock”,
  position: “top_left”
  },
  {
  module: “calendar”,
  header: “US Holidays”,
  position: “top_left”,
  config: {
  calendars: [
  {
  symbol: “calendar-check”,
  url: “webcal://www.calendarlabs.com/ical-calendar/ics/76/US_Holidays.ics” }
  ]
  }
  },
  {
  module: “compliments”,
  position: “lower_third”
  },
  {
  module: “weather”,
  position: “top_right”,
  config: {
  weatherProvider: “openweathermap”,
  type: “current”,
  location: “Menomonie”,
  locationID: “5262634”, //ID from http://bulk.openweathermap.org/sample/city.list.json.gz; unzip the gz file and find your city
  apiKey: “c2647e77b86f90ed7922d3cb499204d0”
  }
  },
  {
  module: “weather”,
  position: “top_right”,
  header: “Weather Forecast”,
  config: {
  weatherProvider: “openweathermap”,
  type: “forecast”,
  location: “Menomonie”,
  locationID: “5262634”, //ID from http://bulk.openweathermap.org/sample/city.list.json.gz; unzip the gz file and find your city
  apiKey: “c2647e77b86f90ed7922d3cb499204d0”
  }
  },
  {
  module: “newsfeed”,
  position: “bottom_bar”,
  config: {
  feeds: [
  {
  title: “New York Times”,
  url: “https://rss.nytimes.com/services/xml/rss/nyt/HomePage.xml”
  }
  ],
  showSourceTitle: true,
  showPublishDate: true,
  broadcastNewsFeeds: true,
  broadcastNewsUpdates: true
  }
  },

  ]
  };

/*************** DO NOT EDIT THE LINE BELOW ***************/
if (typeof module !== “undefined”) {module.exports = config;}
‘’’

[sdetweil]

@adamhrastich unexpected token, usually means the line before the reported line is missing a trailing comma

[adamhrastich]

@sdetweil
i think i found it thank you