MMM-MotionDetector in parallel to MMM-Remote-Control?

[djay07]

Edit:
Found the issue of the cam not working, but it disables MMM-Remote-Control.
Anyone an idea about that? Details in post #2.

---

Hi Guys,
i am a bit puzzled.
I have a RPi camera here, it works fine testing it with:

"raspistill -o image.jpg"

I installed the module MMM-MotionDetector and as described I did:

- Open /etc/modules-load.d/modules.conf
- Add bcm2835-v4l2 to the end of the file and save it.
- Reboot.

What I see is the following:

• The debug output on the screen is never updated.
• the display doesn’t go off.

My entry in the config.js:

           {
            module: "MMM-MotionDetector",
            position: "top_left",   // Optional. This can be any of the regions. Displays debug informations.
            config: {
                    captureIntervalTime: 1000,
                    scoreThreshold: 20,
                    timeout: 6000 // timeout in ms
                    }
            },

HW:
RPi 3B+ and the RPi Camera 1 Rev. 1.3

Any ideas or hints?

[djay07]

Okay here is the thing, I missed an hint in the readme of the module, which says it works only on

address: "localhost",

i had it set to:

address: "0.0.0.0",

to be able to use MMM-Remote-Control. Does anyone have an idea for me use both in parallel?