Read the statement by Michael Teeuw here.
Problems with starting pm2 start mm.sh
-
And I tried restarting the pi and the “Booting up” MagicMirror2 showed but it never actually loaded.
-
-
@madoXX
just did a fresh install of my magicmirror, because the sd card went corrupt.
during the install procedure it somehwere asked me if i want to autostart MagicMirror.
after that it started automatically after booting into the desktop first.
When trying to use pm2, it shows me the process is already running, but it’s name is MagicMirror , not mm.
MagicMirror version 2.8.0 -
@Detto65 yes, the install script uses a json file to configure the pm2 process
-
When i do
pm2 list
The "name, id, mode, status, cpu, and memory chart shows up. It is all in blue.
Below it, it says “use ‘pm2 show <id/name>~ to get more details about an app.’”When i type in
pm2 start
The same chart above displays along with a message saying
[PM2] [ERROR] File ecosystem.config.js is not foundWhat does this mean?
-
I am having the same problem: I did what was mentioned above and after the reboot it stll did not start automaticly. Running “pm2 list” after the reboot shows mm.sh is not runnning.
permitted by applicable law. Last login: Sun Jul 28 20:48:49 2019 pi@magicmirror:~ $ pm2 list [PM2] Spawning PM2 daemon with pm2_home=/home/pi/.pm2 [PM2] PM2 Successfully daemonized ┌──────────┬────┬─────────┬──────┬─────┬────────┬─────────┬────────┬─────┬─────┬──────┬──────────┐ │ App name │ id │ version │ mode │ pid │ status │ restart │ uptime │ cpu │ mem │ user │ watching │ └──────────┴────┴─────────┴──────┴─────┴────────┴─────────┴────────┴─────┴─────┴──────┴──────────┘ Use `pm2 show <id|name>` to get more details about an app pi@magicmirror:~ $ pm2 start installers/mm.sh [PM2][ERROR] script not found : /home/pi/installers/mm.sh script not found : /home/pi/installers/mm.sh ┌──────────┬────┬─────────┬──────┬─────┬────────┬─────────┬────────┬─────┬─────┬──────┬──────────┐ │ App name │ id │ version │ mode │ pid │ status │ restart │ uptime │ cpu │ mem │ user │ watching │ └──────────┴────┴─────────┴──────┴─────┴────────┴─────────┴────────┴─────┴─────┴──────┴──────────┘ Use `pm2 show <id|name>` to get more details about an app pi@magicmirror:~ $ pm2 start mm.sh [PM2] Starting /home/pi/mm.sh in fork_mode (1 instance) [PM2] Done. ┌──────────┬────┬─────────┬──────┬─────┬────────┬─────────┬────────┬─────┬──────────┬──────┬──────────┐ │ App name │ id │ version │ mode │ pid │ status │ restart │ uptime │ cpu │ mem │ user │ watching │ ├──────────┼────┼─────────┼──────┼─────┼────────┼─────────┼────────┼─────┼──────────┼──────┼──────────┤ │ mm │ 0 │ N/A │ fork │ 718 │ online │ 0 │ 0s │ 0% │ 2.6 MB │ pi │ disabled │ └──────────┴────┴─────────┴──────┴─────┴────────┴─────────┴────────┴─────┴──────────┴──────┴──────────┘ Use `pm2 show <id|name>` to get more details about an app pi@magicmirror:~ $ pm2 save [PM2] Saving current process list... [PM2] Successfully saved in /home/pi/.pm2/dump.pm2 pi@magicmirror:~ $ pm2 list ┌──────────┬────┬─────────┬──────┬─────┬────────┬─────────┬────────┬─────┬──────────┬──────┬──────────┐ │ App name │ id │ version │ mode │ pid │ status │ restart │ uptime │ cpu │ mem │ user │ watching │ ├──────────┼────┼─────────┼──────┼─────┼────────┼─────────┼────────┼─────┼──────────┼──────┼──────────┤ │ mm │ 0 │ N/A │ fork │ 718 │ online │ 0 │ 44s │ 0% │ 2.6 MB │ pi │ disabled │ └──────────┴────┴─────────┴──────┴─────┴────────┴─────────┴────────┴─────┴──────────┴──────┴──────────┘ Use `pm2 show <id|name>` to get more details about an app pi@magicmirror:~ $ pm2 save [PM2] Saving current process list... [PM2] Successfully saved in /home/pi/.pm2/dump.pm2 pi@magicmirror:~ $ sudo reboot Connection to 192.168.138.28 closed by remote host. Connection to 192.168.138.28 closed.
pi@magicmirror:~ $ cat mm.sh cd /home/pi/MagicMirror DISPLAY=:0 npm start pi@magicmirror:~ $ ls -lha mm.sh -rwxr-xr-x 1 pi pi 45 Jul 28 20:14 mm.sh pi@magicmirror:~ $
-
@Raksasas should be executing those while in the MagicMirror folder
-
Looking over the “Auto Start” page I do not see where it states that the pm2 commands are to be run while inside the MagicMirror folder.
With you stating that it seems to be saying that the “mm.sh” script needs to be ran from inside the “MagicMirror” too. Again the “Auto Start” page shows that it was created inside the ‘home’ (~) folder. So one would think/presume it can be ran from inside the “home” folder also.
Either way I will give it a go.
-
-
@Raksasas it was the
pm2 start installers/mm.sh
That needed to be done from the MagicMirror folder.
Cause I ‘ASSUMED’ if u were working on mm, you would always be in that folder.
installers folder is in mm, not in user home