VGA (not a HDMI) sleep via PIR-Sensor

bdream

Hi AxLED,
may I ask you for help please?

I did connect a PIR to my Rpi to PIN 40 / BCM 21

git clone https://github.com/mboskamp/MMM-PIR.git
cd MMM-PIR
npm install

Added the the config in the verry first line within the modules chapter

{
        module: 'MMM-PIR',
        position: 'top_center',
        config: {
                sensorPin: 21,
                delay: 10000,
                turnOffDisplay: true,
                showCountdown: true,
//                callbackScripts: ["callback.py"
        }
},

Nothing happen. No countdown starts. No Disply turn off.

Wiring was inslalled already:

pi@MagicMirror:~ $ gpio -v
gpio version: 2.50
Copyright (c) 2012-2018 Gordon Henderson
This is free software with ABSOLUTELY NO WARRANTY.
For details type: gpio -warranty

Raspberry Pi Details:
  Type: Pi 3, Revision: 02, Memory: 1024MB, Maker: Sony
  * Device tree is enabled.
  *--> Raspberry Pi 3 Model B Rev 1.2
  * This Raspberry Pi supports user-level GPIO access.

And I tried this command an a reboot:

sudo usermod -a -G gpio pi

Have you got any hints for me please?

bdream

no idea what to do getting display off while noone is infront of it using PIR-Sensor?

Cheers, bdream

AxLed

@bdream
There are two Pir Sensor Modules. I use MMM-PIR-Sensor. Maybe this helps.
AxLED

sdetweil

@bdream
MMM-PIR uses the tvservice command (see MMM-PIR/callbackscripts/default for the two scripts)

MMM-PIR-Sensor uses the /usr/bin/vcgencmd command

YOU have to make sure the different approaches work

my TV does NOT respond to ANY command…

bdream

Good Info!
Will play next days with MMM-PIR and MMM-PIR-Sensor investigating about needed scripts vs. /usr/bin/vcgencmd command

If I can’t get it run mayby I will add an relais to turn off the display…

At the moment I have to understand the both approaches and what my display is able to handle.
Could be no way is possible as it’s an verry old one.

Cheers, bdream