Read the statement by Michael Teeuw here.
MMM-ArduPort
-
I have reinstaled all original files for arduport and started debuging… Again.:smiling_face_with_open_mouth_cold_sweat:
I didn’t mention it before, but I’m running MM on Raspbian lite.
I’ve found I had problems with python. Force reinstalling modules solved it.I have allso found some errors in arduino.py,
Had to change:rgxData = re.compile("[\[][a-zA-Z0-9-].*[\:][a-zA-Z0-9-].*[\:][a-zA-Z0-9-.].*[\]]")to
rgxData = re.compile("[\[][a-zA-Z0-9\-].*[\:][a-zA-Z0-9\-].*[\:][a-zA-Z0-9\-\.].*[\]]")and
incoming = self.arduino.readline(self.arduino.in_waiting).decode('ascii').replace('\r', '').replace('\n', '')to
incoming = self.arduino.readline(self.arduino.in_waiting).decode('ascii', errors="ignore").replace('\r', '').replace('\n', '')Now, when running
python arduport.pyI get this:
{"debug": "SerialPort shell started..."} {"debug": "Waiting Ardunio to connect on port..."} {"status": {"data": "connected", "name": "connect"}} {"status": {"data": "starting", "name": "setup"}} {"status": {"data": "started", "name": "setup"}} {"sensor": {"data": "0.02", "name": "Baterija"}} {"sensor": {"data": "-0.00", "name": "Struja"}} {"sensor": {"data": "0.00", "name": "Solarno"}} {"sensor": {"data": "-0.12", "name": "Panel"}} {"sensor": {"data": "-0.00", "name": "Inverter"}} {"sensor": {"data": "0.04", "name": "Baterija"}} {"sensor": {"data": "-0.00", "name": "Struja"}} {"sensor": {"data": "0.00", "name": "Solarno"}}I’m guesing, this should be working now. But ArduPort is still stuck at “Waiting for connection…”
Here is C/P from my config.js
{ module: "MMM-ArduPort", position: "top_right", header: "Solarni sustav", config:{ portname: "/dev/ttyUSB0", updateInterval: 1, animationSpeed: 1000, displayIcons: false, showDescriptopn: true, hideLoading: false, hideWaiting: false, useColors: false, sensors: [ { name: "Solarno", description: "Solarni sustav", maxValue: 5, maxFormat: "({0}) ", highestValue: 4, highestFormat: "({0}) Greska - pregrijavanje", highValue: 3, highFormat: "({0}) Greska - preopterecenje", lowValue: 2, lowFormat: "({0}) Backup mod", lowestValue: 1, lowestFormat: "({0}) Ukljuceno", minValue: 0, minFormat: "({0}) Iskljuceno" }, { name: "Baterija", description: "Stanje baterije", maxValue: 26, maxFormat: "({0} V) Balansiranje", highestValue: 25.5, highestFormat: "({0} V) 100%", highValue: 24.87, highFormat: "({0} V) 75%", lowValue: 24.2, lowFormat: "({0} V) 50%", lowestValue: 11.74, lowestFormat: "({0} V) 25%", minValue: 23.2, minFormat: "({0} V) 0%" }, { name: "Struja", description: "Punjenje ili praznjenje", maxValue: 20, maxFormat: "({0} A) Punjenje", highestValue: 10, highestFormat: "({0} A) Punjenje", highValue: 0, highFormat: "({0} A) ", lowValue: -20, lowFormat: "({0} A) Praznjenje", lowestValue: -40, lowestFormat: "({0} A) Brzo preznjenje", minValue: -60, minFormat: "({0} A) PREOPTERECENJE" }, { name: "Panel", description: "Snaga solarnih panela", maxValue: 500, maxFormat: "({0} W)", highestValue: 400, highestFormat: "({0} W)", highValue: 300, highFormat: "({0} W)", lowValue: 200, lowFormat: "({0} W)", lowestValue: 100, lowestFormat: "({0} W)", minValue: 0, minFormat: "({0} W)" }, { name: "Inverter", description: "Potrosnja invertera", maxValue: 1000, maxFormat: "({0} W)", highestValue: 800, highestFormat: "({0} W)", highValue: 600, highFormat: "({0} W)", lowValue: 400, lowFormat: "({0} W)", lowestValue: 200, lowestFormat: "({0} W)", minValue: 0, minFormat: "({0} W)" } ] } },EDIT:
Here is C/P from chrome console:
Starting module: MMM-ArduPort MMM-ArduPort.js:286 [MMM-ArduPort]:: MMM-ArduPort: status MMM-ArduPort.js:286 [MMM-ArduPort]:: MMM-ArduPort: { "action": "status", "name": "initialized" } MMM-ArduPort.js:286 [MMM-ArduPort]:: MMM-ArduPort: error MMM-ArduPort.js:286 [MMM-ArduPort]:: MMM-ArduPort: "pyshell-throw" MMM-ArduPort.js:123 [socketNotificationReceived::error]: -
@Kereknjek said in MMM-ArduPort:
MMM-ArduPort.js:286 [MMM-ArduPort]:: MMM-ArduPort: error
MMM-ArduPort.js:286 [MMM-ArduPort]:: MMM-ArduPort: “pyshell-throw”
MMM-ArduPort.js:123 [socketNotificationReceived::error]:yes, according to the code, this notifies the module that the python script running in the background ended, unexpectedly.
I would try running it from the commandshell in the foreground without the MM and see what is going on
-
How do I do that?
-
It seems I’m having isues with Python.
I have reinstaled Python and Python3, npm, python-shell and node js. Nothing worked. It was sending errors even with blank arduino, arduino sending only “starting” and “started” commands…
So, due to my lack of knowlege of Python or anything else surrounding ArduPort, I’m abandoning it…To bad. It is very elagant module.
-
@Kereknjek said in MMM-ArduPort:
How do I do that?
on the pi, ctrl-alt-t, will open a terminal window, you can also ssh into the pi
then execute the command that the module would use
python ....... whateverI see u dropped this path, but for other…
-
I tried that.
@Kereknjek said in MMM-ArduPort:
Now, when running
python arduport.pyI get this:
{"debug": "SerialPort shell started..."} {"debug": "Waiting Ardunio to connect on port..."} {"status": {"data": "connected", "name": "connect"}} {"status": {"data": "starting", "name": "setup"}} {"status": {"data": "started", "name": "setup"}} {"sensor": {"data": "0.02", "name": "Baterija"}} {"sensor": {"data": "-0.00", "name": "Struja"}} {"sensor": {"data": "0.00", "name": "Solarno"}} {"sensor": {"data": "-0.12", "name": "Panel"}} {"sensor": {"data": "-0.00", "name": "Inverter"}} {"sensor": {"data": "0.04", "name": "Baterija"}} {"sensor": {"data": "-0.00", "name": "Struja"}} {"sensor": {"data": "0.00", "name": "Solarno"}} -
@Kereknjek that looks good…
looks at the MMM-Arduino module, it shows debugging info on the developers window
ctrl-shift-i on the keyboard, select the tab labeled ‘console’
you can filter out other modules messages by putting part of the module name in the filter field
ardu
also, have to set developerMode:true in the module config.js section
if (self.config.developerMode) { var date = new Date(); var time = date.getHours() + ":" + date.getMinutes() + ":" + date.getSeconds(); message = self.name + ": (" + self.data.index + ")(" + time + ") " + message; } else { message = self.name + ": " + message; } switch (type) { case "error": Log.error(this.logPrefix + message); break; case "warn": Log.warn(this.logPrefix + message); break; case "info": Log.info(this.logPrefix + message); break; case "dev": if (self.config.developerMode) { Log.log(this.logPrefix + message); } break; default: Log.log(this.logPrefix + message); } -
has anyone solved this problem?
I don’t understand anything at all in JS?
error text from console:Uncaught (in promise) TypeError: "({0}) ".format is MMM-ArduPort.js:143 not a function at Class.formatValue (MMM-ArduPort.js:143) at Class.getDom (MMM-ArduPort.js:250) at main.js:111 at new Promise (<anonymous>) at updateDom (main.js:110) at Object.updateDom (main.js:542) at Class.updateDom (module.js:357) at Class.socketNotificationReceived (MMM-ArduPort.js:118) at module.js:243 at r.<anonymous> (socketclient.js:39)
help someone, I’ve been trying to run it for a long time !!!
-
@Crime as I posted the other day, someone posted a fix in the issue for the module
u have to change some code
-
@sdetweil please, more details. I really need help
