Problems with my Config file

Omensch

well I don’t know what this really means.
do you have an idea?

pi@raspberrypi:~ $ npm run config:check
npm ERR! Linux 4.4.50-v7+
npm ERR! argv "/usr/bin/node" "/usr/bin/npm" "run" "config:check"
npm ERR! node v6.17.1
npm ERR! npm  v3.10.10
npm ERR! path /home/pi/package.json
npm ERR! code ENOENT
npm ERR! errno -2
npm ERR! syscall open

npm ERR! enoent ENOENT: no such file or directory, open '/home/pi/package.json'
npm ERR! enoent ENOENT: no such file or directory, open '/home/pi/package.json'
npm ERR! enoent This is most likely not a problem with npm itself
npm ERR! enoent and is related to npm not being able to find a file.
npm ERR! enoent

npm ERR! Please include the following file with any support request:
npm ERR!     /home/pi/npm-debug.log

Omensch

@EdO my problem is that when I run MM, it sais: please create config file

sdetweil

@Omensch please, run that in the MagicMirror folder

sdetweil

@Omensch I ran config:check and don’t see any errors…

what problem are u having?

EdO

I’m not seeing anything jump out at me though I’m not familiar with all of your modules. If the config:check doesn’t show any errors, then you need to go through each module definition to make sure it is correct.

You can go through each one checking the documentation as you go or you can do what I’ve done. When I ran into a similar problem I commented out every module except one. Then one at a time I restarted MM to see if that module was defined properly until I found the offending module. Once you know the one that is causing problems, you will need to pull up the documentation for it to find out what is wrong.

When you find the offending module, now you need to check to see what is wrong with that module definition. Chances are it’s a parameter that is misspelled or not applicable or specified incorrectly.

sdetweil

@Omensch also, how did u do the setup of MagicMirror?

Manually, or with my automated install script?
From here
https://github.com/sdetweil/MagicMirror_scripts

Omensch

@EdO thanks I’ll try that

Omensch

@sdetweil with the command from the website of MagicMirror

sdetweil

@Omensch the old installer?

try the new one, rename the MagicMirror folder out of the way
then execute this from a terminal window or ssh session

bash -c "$(curl -sL https://raw.githubusercontent.com/sdetweil/MagicMirror_scripts/master/raspberry.sh)"

Mykle1

@Omensch

Save yourself a lot of time and trouble and follow @sdetweil’s suggestion.