covid bell curve line graph tracker

sdetweil

@rafaelcota but now it shouldn’t have inline-block applied, in the elements view

rafaelcota

@rafaelcota BTW, my resolution is 1920 x 1080 in an RPI 4

sdetweil

@rafaelcota and I am running this particular test on a 1920x1080 ubuntu… but my pi4 is just behind me at 3840x2160

rafaelcota

@sdetweil
It still there…
I’m sure you have better things to do than debug this with a user… I’m going to do a clean install, even if it does mean to use the brand new MM version (don’t have much installed, and have lots of time nowadays) and see what happens…

alt text

sdetweil

@rafaelcota use my installer script
see here
https://github.com/sdetweil/MagicMirror_scripts

rafaelcota

@sdetweil Thank you…

Used them… worked well.

Did a clean install, use my old config and same thing happened.
Change my config.js with original+MyCovid19 and ALL OK!

So, I changed the original config.js with my modules, one by one and ALL went OK.

So, I got curious, and then went to change the original config.js to my old one, module by module so I could find which one was interfering, and ALL went OK.

UNTIL, and this is really strange, when I change the address of localhost at the beginning, it went to the same problem again.

If I have address: “localhost”, ALL is OK
If I have address: “0.0.0.0”, then the problem appears again.

Any ideas?

Here’s my mirror working OK
alt text

sdetweil

@rafaelcota said in covid bell curve line graph tracker:

If I have address: “localhost”, ALL is OK
If I have address: “0.0.0.0”, then the problem appears again.

and
ipWhitelist:[],

rafaelcota

@sdetweil I don’t understand how this parameters relate with the size of a graph.

I think it’s weird, at least it kept me entertained for a couple of hours in quarantine. :)

I hope you and your family and friends are OK.

sdetweil

@rafaelcota all ok here…

i have no idea really on the parms affecting… all my pi systems use address:“0.0.0.0” and ipWhitelist:[]
so I can open their pages on my pc at my desk. (easier to debug modules this way, run there , debug here)

i can only think that something in the chart.js library is trying to get a file or something and there is a cross site scripting restriction to stop it…

bhepler

@rafaelcota said in covid bell curve line graph tracker:

@sdetweil Thank you…
If I have address: “localhost”, ALL is OK
If I have address: “0.0.0.0”, then the problem appears again.

Yeah, 0.0.0.0 is not the IP address of your Pi. If you don’t want to use localhost, try the IP address of your Pi on your local network instead. (you can find the local IP address by entering ip address from your Pi) The Magic Mirror framework is a web server at heart, so it needs to understand what IP address it is using. You can try 127.0.0.1 as well, as that is the “local loopback” IP address. It always points to itself.