Update MMM

[mattx38]

It is still running, but nothing changed into the terminal.
After the command “npm install --save-dev electron-rebuild” I had this message :

• electron-rebuild@1.10.1
  updated 2 packages and audited 822 packages in 16.302s

3 packages are looking for funding
run npm fund for details

found 9 low severity vulnerabilities
run npm audit fix to fix them, or npm audit for details

Should I run “npm fund” and “npm audit fix” before launching the second command ?

[sdetweil]

@mattx38 no, those won’t help anything

[sdetweil]

@mattx38 did u disable pir-sensor?

are there still problems (dev window, terminal window?)

[mattx38]

Yes I disabled it.
Can I run a new Putty window while the rebuild of Assistant is running, to check ?

[sdetweil]

@mattx38 sure

[mattx38]

[2020-04-01 23:02:44.155] [ERROR] WARNING! Could not load config file. Starting with default configuration. Error found: Error: Failed to load gRPC binary modu le because it was not installed for the current system
Expected directory: electron-v6.1-linux-arm-glibc
Found: [electron-v3.1-linux-arm-glibc, node-v64-linux-arm-glibc]
This problem can often be fixed by running “npm rebuild” on the current system
Original error: Cannot find module ‘/home/pi/MagicMirror/modules/MMM-AssistantMk 2/node_modules/grpc/src/node/extension_binary/electron-v6.1-linux-arm-glibc/grpc _node.node’
Require stack:

• /home/pi/MagicMirror/modules/MMM-AssistantMk2/node_modules/grpc/src/grpc_exten sion.js
• /home/pi/MagicMirror/modules/MMM-AssistantMk2/node_modules/grpc/src/client_int erceptors.js
• /home/pi/MagicMirror/modules/MMM-AssistantMk2/node_modules/grpc/src/client.js
• /home/pi/MagicMirror/modules/MMM-AssistantMk2/node_modules/grpc/index.js
• /home/pi/MagicMirror/modules/MMM-AssistantMk2/node_modules/google-assistant/co mponents/assistant.js
• /home/pi/MagicMirror/modules/MMM-AssistantMk2/node_modules/google-assistant/in dex.js
• /home/pi/MagicMirror/modules/MMM-AssistantMk2/components/assistant.js
• /home/pi/MagicMirror/modules/MMM-AssistantMk2/node_helper.js
• /home/pi/MagicMirror/js/app.js
• /home/pi/MagicMirror/js/electron.js
• /home/pi/MagicMirror/node_modules/electron/dist/resources/default_app.asar/mai n.js

[sdetweil]

@mattx38 i’m sorry, now out of my depth of solutions… you’ll have to get @Sean (MMM-AssistantMk2 author) involved…

[mattx38]

Ok, thanks for your help so far.
The rebuilding is not done yet ; still running.

[mattx38]

Rebuild is done for the Assistant. The MM is launnching again. I didn’t try to activate it by saying “Jarvis” (everyone is sleeping at home).

I put PIR module ON, black screen again, and still this error :

[2020-04-01 23:30:25.054] [ERROR] WARNING! Could not load config file. Starting with default configuration. Error found: Error: The module ‘/home/pi/MagicMirror/modules/MMM-PIR-Sensor/node_modules/epoll/build/Release/epoll.node’
was compiled against a different Node.js version using
NODE_MODULE_VERSION 64. This version of Node.js requires
NODE_MODULE_VERSION 73. Please try re-compiling or re-installing
the module (for instance, using npm rebuild or npm install).

EDIT : So I did a “npm install” into the MMM-PIR-Sensor folder, and now it works again.
A very big THANK YOU to YOU !!!

[sdetweil]

@mattx38 cool. My update script would have fixed PIR problem. But not assistant or hotword

[Peter Leemon]

HI all I’m getting the following message on my MM screen “MagicMirror2 update available” then underneath “The current installation is 2994 comments behind on the master branch”

Anyone know how to resolve this issue?

[sdetweil]

@Peter-Leemon run my update script from here

https://github.com/sdetweil/MagicMirror_scripts

[Peter Leemon]

@sdetweil run the first script?

[sdetweil]

@Peter-Leemon

upgrade-script.sh will do the git pull and npm install, and refresh npm setup for any modules that might need it
it should handle all the work… and give you a trial run of all that…

only applying changes if u request them

give it a try this works on Mac as well

bash -c "$(curl -sL https://raw.githubusercontent.com/sdetweil/MagicMirror_scripts/master/upgrade-script.sh)"
no changes are made to the local repo or the working copy

if you WANT to actually apply the changes do

bash -c "$(curl -sL https://raw.githubusercontent.com/sdetweil/MagicMirror_scripts/master/upgrade-script.sh)" apply
there is a log file (upgrade.log) in the MagicMirror/installers folder…

[Peter Leemon]

@sdetweil said in Update MMM:

bash -c “$(curl -sL https://raw.githubusercontent.com/sdetweil/MagicMirror_scripts/master/upgrade-script.sh)”

sorry a noob here do i run this in terminal?

[sdetweil]

@Peter-Leemon yes, stop MM first of course

[Peter Leemon]

when I paste bash -c “$(curl -sL https://raw.githubusercontent.com/sdetweil/MagicMirror_scripts/master/upgrade-script.sh) i get no such file or directory

[sdetweil]

@Peter-Leemon dang forum, change the " to wrong character… copy/paste it again

need the trailing quote too

[Peter Leemon]

pi@raspberrypi:~ $ bash -c “$(curl -sL https://raw.githubusercontent.com/sdetweil/MagicMirror_scripts/master/upgrade-script.sh)”
the log will be /home/pi/MagicMirror/installers/upgrade.log
No LSB modules are available.
doing test run = true
update log will be in /home/pi/MagicMirror/installers/upgrade.log

upgrading from version 2.10.1 to 2.11.0
fetching latest revisions
there are 3 local files that are different than the master repo

modules/default/calendar/calendar.js
modules/default/compliments/compliments.js
package-lock.json

any *-lock.json files do not need to be saved
do you want to save these files for later (Y/n)?y
processing dependency changes for active modules with package.json files

processing for module MMM-NOAA3 please wait

skipped processing for MMM-NOAA3, doing test run
processing complete for module MMM-NOAA3

processing for module MMM-EARTH please wait

skipped processing for MMM-EARTH, doing test run
processing complete for module MMM-EARTH

processing for module MMM-GooglePhotos please wait

skipped processing for MMM-GooglePhotos, doing test run
processing complete for module MMM-GooglePhotos

test run, restoring files stashed
pi@raspberrypi:~ $

Is this correct?

[sdetweil]

@Peter-Leemon said in Update MMM:

doing test run = true

yes, now add ‘apply’’

no changes are made to the local repo or the working copy

if you WANT to actually apply the changes do

bash -c "$(curl -sL https://raw.githubusercontent.com/sdetweil/MagicMirror_scripts/master/upgrade-script.sh)" apply

BUT

there are 3 local files that are different than the master repo

modules/default/calendar/calendar.js
modules/default/compliments/compliments.js
package-lock.json

any *-lock.json files do not need to be saved

I assume u might want to save those changed files…