Weather not displaying envcanada provider

lexcyr

Platform : Xubuntu
Node version: v14.18.1
MagicMirror Version : V2-Beta

Description:
Hello,
After installation and configuration of MagicMirror everything was working and the weather envcanada as well.
Since this morning it’s just loading. i’ve tried with a fresh installation and still not loading.
Unfortunately don’t know from where to start for troubleshooting.
i’ve already check several time the configuration and it seems fine. But i am pretty sure i am missing something, you can see the config below:

{
			module: "weather",
			position: "top_right",
			config: {
				weatherProvider: "envcanada",
				type: "current",
				location: "Québec, QC",
				siteCode: "s0000620",
				//provCode: "QC"
			}
		},
		{
			module: "weather",
			position: "top_right",
			header: "Forecast",
			config: {
				weatherProvider: "envcanada",
				type: "forecast",
				location: "Québec, QC",
				siteCode: "s0000620",
				//provCode: "QC"
			}
		},

Thanks in advance for your help.

sdetweil

@lexcyr said in Weather not displaying envcanada provider:

MagicMirror Version : V2-Beta

what does that mean ? v2 beta?

we are at v 2.17.1

use my install script , see
https://github.com/sdetweil/MagicMirror_scripts

rename the MM folder out of the way, the script assumes new install

this sounds like the expired certificate authority certificate, bug in electron, fixed in 2.17.1

lexcyr

@lexcyr
i just made a fresh installion using your script, and i still have the same problem

sdetweil

@lexcyr can I show the mm startup messages

lexcyr

@sdetweil here is it:

crazylegs

@lexcyr

I notice you have provCode commented out in your config file. The envcanada provider requires that parm, so uncomment and see if your problem is resolved.

lexcyr

@crazylegs Already and still not working

sdetweil

@lexcyr using your config, and the MM config set to address:“0.0.0.0”

I see in the dev window

Access to XMLHttpRequest at 
'https://thingproxy.freeboard.io/fetch/https://dd.weather.gc.ca/citypage_weather/xml/QC/s0000620_e.xml' from origin 'http://0.0.0.0:8090' has been blocked by CORS policy: No 'Access-Control-Allow-Origin' header is present on the requested resource.

but using address:“localhost” works ok

lexcyr

@sdetweil Thank you.

you are right it’s working with localhost, but now i don’t know how to make it listen to other interface in the sametime to be able to access to it remotely.

sdetweil

@lexcyr try this, not sure

find the ip address of the pi,
ipconfig, look in your router, …whatever way

replace

address:"localhost",

with

address:"???",

like on my machine

address:"192.168.2.106",

where ??? is the ip address

in my MMM-Config, this address choice is in the dropdown list