New Setup - Log Filled with "CreatePlatformSocket() failed: Address family not supported by protocol (97)"

butchkemper · Jun 6, 2023, 7:01 PM

I have created a MagicMirror on a RPi 3B+ and it is running but with some issues.

I am working to clean up the PM2 error log which is filled with this message: “[14606:0606/134932.852666:ERROR:socket_posix.cc(93)] CreatePlatformSocket() failed: Address family not supported by protocol (97”

Where should I begin looking for the problem?

Thanks.

Butch

butchkemper · Jun 13, 2023, 9:23 PM

Sam,

I built a new SDcard for Raspios and installed MM using your scripts. Started MM and the problem did not occur.

Next, I rebuilt the SSD with Raspios and installed MM. Started MM and the problem did not occur at startup and I waited while tailing the logs but nothing happened.

Next, I move my MM configuration changes, modules, and updates to the SSD. The problem did not occur at startup or after tailing the logs for a time.

I am declaring a victory for me. But we all know, in the end, that the computer demons won.

Butch

sdetweil · Jun 6, 2023, 7:11 PM

@butchkemper can u tell me what OS instance you are running?

output of
lsb_release -a
and
uname -a

and node -v, npm -v

will help

and how did you install MM? manual method or my automated scripts?

also, can u tell me the address:
value in ~/MagicMirror/config/config.js

butchkemper · Jun 7, 2023, 5:44 PM

Thank you for your response. I am delayed in responding because La Jefecita had other priorities for me that did not include my computers. :)

I have a typo in the original post as the computer is a Raspberry Pi Model 3 A+ Rev 1.0

The Raspios was built with the image:
2023-05-03-raspios-bullseye-armhf.img.xz

The output from the commands are:

uname -a
pi@MagicMirror:~$ uname -a
Linux MagicMirror 6.1.21-v7+ #1642 SMP Mon Apr 3 17:20:52 BST 2023 armv7l GNU/Linux

lsb_release -a
No LSB modules are available.
Distributor ID: Raspbian
Description: Raspbian GNU/Linux 11 (bullseye)
Release: 11
Codename: bullseye

node -v
v16.20.0

npm -v
8.19.4

I used the Manual Installation method as described in MagicMirror² Documentation Installation & Usage.

Address value in ~/MagicMirror/config/config.js is localhost

I have also included the config file below.

Thank you for your assistance.

Butch

/* MagicMirror² Config Sample
 *
 * By Michael Teeuw https://michaelteeuw.nl
 * MIT Licensed.
 *
 * For more information on how you can configure this file
 * see https://docs.magicmirror.builders/configuration/introduction.html
 * and https://docs.magicmirror.builders/modules/configuration.html
 */
let config = {
        address: "localhost",   // Address to listen on, can be:
                                // - "localhost", "127.0.0.1", "::1" to listen on loopback interface
                                // - another specific IPv4/6 to listen on a specific interface
                                // - "0.0.0.0", "::" to listen on any interface
                                // Default, when address config is left out or empty, is "localhost"
        port: 8080,
        basePath: "/",          // The URL path where MagicMirror² is hosted. If you are using a Reverse proxy
                                        // you must set the sub path here. basePath must end with a /
        ipWhitelist: ["127.0.0.1", "192.168.1.0/24"],   // Set [] to allow all IP addresses
                                                                // or add a specific IPv4 of 192.168.1.5 :
                                                                // ["127.0.0.1", "::ffff:127.0.0.1", "::1", "::ffff:192.168.1.5"],
                                                                // or IPv4 range of 192.168.3.0 --> 192.168.3.15 use CIDR format :
                                                                // ["127.0.0.1", "::ffff:127.0.0.1", "::1", "::ffff:192.168.3.0/28"],

        useHttps: false,                // Support HTTPS or not, default "false" will use HTTP
        httpsPrivateKey: "",    // HTTPS private key path, only require when useHttps is true
        httpsCertificate: "",   // HTTPS Certificate path, only require when useHttps is true

        language: "en",
        locale: "en-US",
        logLevel: ["INFO", "LOG", "WARN", "ERROR"], // Add "DEBUG" for even more logging
        timeFormat: 24,
        units: "imperial",

        // serverOnly:  true/false/"local" ,
        // local for armv6l processors, default
        //   starts serveronly and then starts chrome browser
        // false, default for all NON-armv6l devices
        // true, force serveronly mode, because you want to.. no UI on this device

        modules: [
                {
                        module: "alert",
                },
                {
                        module: "MMM-LogExt",
                        config: {}
                },
                {
                        module: "updatenotification",
                        position: "top_bar"
                },
                {
                        module: "clock",
                        position: "top_left",
                        config: {
                                timeFormat: 24,
                        },
                },
                {       module: "calendar",
                       header: "Kemper Family Combined",
                        position: "top_left",
                        config: {
                                coloredText: true,
                                timeFormat: 24,
                                fade: false,
                                fadePoint: 1,
                                maximumEntries: 20,
                                maximumNumberOfDays: 21,
                                fetchInterval: 300000,
                                calendars: [
                                        {       // Butch
                                                url: 'http://localhost:8080/modules/calendars/xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx.ics',
                                                name: "Butch",
                                                symbol: "calendar",
                                                color: '#FF0000'
                                        },
                                        {       // Jan
                                                url: 'http://localhost:8080/modules/calendars/xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx.ics',
                                                name: "Jan",
                                                symbol: "calendar",
                                                color: '#008000'
                                        },
                                        {       // Family 1
                                                url: 'http://localhost:8080/modules/calendars/xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx.ics',
                                                name: "Family 1",
                                                symbol: "calendar",
                                                color: '#FFFF00'
                                        },
                                        {       // Family 2
                                                url: 'http://localhost:8080/modules/calendars/xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx.ics',
                                                name: "Family 2",
                                                symbol: "calendar",
                                                color: '#00FF00'
                                        },
                                        {       // Kids
                                                url: 'http://localhost:8080/modules/calendars/xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx.ics',
                                                name: "Kids",
                                                symbol: "calendar",
                                                color: '#0000FF'
                                        },
                                        {       // City Council
                                                url: 'http://localhost:8080/modules/calendars/xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx.ics',
                                                name: "City Council",
                                                symbol: "calendar",
                                                color: '#FFA500'
                                        }
                                ]
                        }
                },

//              {
//                      module: "compliments",
//                      position: "lower_third"
//              },
                {
                        module: "weather",
                        position: "top_right",
                       header: "Current Weather",
                        config: {
                                weatherProvider: "openweathermap",
                                type: "current",
                                units: "imperial",
                                tempUnits: "imperial",
                                roundTemp: true,
                                timeFormat: 24,
                                appendLocationNameToHeader: true,
                                onlyTemp: false,
                                showSun: true,
                                fade: false,
                                fadePoint: 1,
                                colored: true,
                                updateInterval: 900000,
                                maxEntries: 7,
                                degreeLabel: true,
                                lang: "en",
                                location: "Sachse,Texas",
                                locationID: "4724564",
                                //ID from http://bulk.openweathermap.org/sample/city.list.json.gz;
                                apiKey: "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx"
                        }
                },
                {
                        module: "weather",
                        position: "top_right",
                        header: "Weather Forecast at",
                        config: {
                                initialLoadDelay: 5000,
                                weatherProvider: "openweathermap",
                                type: "forecast",
                                units: "imperial",
                                tempUnits: "imperial",
                                roundTemp: true,
                                timeFormat: 24,
                                appendLocationNameToHeader: true,
                                fade: false,
                                fadePoint: 1,
                                colored: true,
                                updateInterval: 900000,
                                maxEntries: 10,
                                maxNumberOfDays: 10,
                                ignoreToday: false,
                                degreeLabel: true,
                                lang: "en",
                                location: "Sachse,Texas",
                                locationID: "4724564", //ID from http://bulk.openweathermap.org/sample/city.list.json.gz;
                                apiKey: "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx"
                        }
                },
                {
                        module: "MMM-Fuel",
                        position: "top_right",
                        config: {
                                provider: "gasbuddy",
                                zip: "75048",
                                types: ["regular"],
                                sortBy: "regular",
                                max: 7,
                                showDistance: false,
                                fade: false,
                                updateInterval: 30000,
                                rotate: false,
                                rotateInterval: 15000
                                }
                },
                {
                        module: "newsfeed",
                        position: "bottom_bar",
                        config: {
                                feeds: [
                                        {
                                                title: "New York Times",
                                                url: "https://rss.nytimes.com/services/xml/rss/nyt/HomePage.xml"
                                        }
                                ],
                                showSourceTitle: true,
                                showPublishDate: true,
                                broadcastNewsFeeds: true,
                                broadcastNewsUpdates: true
                        }
                },
        ]
};

/*************** DO NOT EDIT THE LINE BELOW ***************/
if (typeof module !== "undefined") {module.exports = config;}

butchkemper · Jun 7, 2023, 5:53 PM

@sdetweil said in New Setup - Log Filled with "CreatePlatformSocket() failed: Address family not supported by protocol (97)":

@butchkemper can u tell me what OS instance you are running?

output of
lsb_release -a
and
uname -a

and node -v, npm -v

will help

and how did you install MM? manual method or my automated scripts?

also, can u tell me the address:
value in ~/MagicMirror/config/config.js

The OS was built using this image: 2023-05-03-raspios-bullseye-armhf.img.xz.

The Raspberry Pi is a Model 3 A+ not a 3B+.

The output of the commands you requested is:

lsb_release -a
No LSB modules are available.
Distributor ID: Raspbian
Description: Raspbian GNU/Linux 11 (bullseye)
Release: 11
Codename: bullseye

uname -a
Linux MagicMirror 6.1.21-v7+ #1642 SMP Mon Apr 3 17:20:52 BST 2023 armv7l GNU/Linux

node -v
v16.20.0

npm -v
8.19.4

the address: value in ~/MagicMirror/config/config.js: localhost

Installation was the Manual Method.

Thank you for your help.

Butch

MMRIZE · Jun 7, 2023, 8:27 PM

@butchkemper
Usually that error message happens on socket stream fails but could not know where it depends with only that log.

My suggestion;
Run only default modules; happens again?

If not, add 3rd party modules one by one and test each time. You might find the suspicious module.
If so, reinstall fresh MM; then try above method.

Still happens even with fresh MM, update your OS and dependencies. And test again.

The last method would be to format your sd card then reinstall OS itself. If still error happens; I have no way…

Wish you a luck.

sdetweil · Jun 7, 2023, 8:56 PM

@butchkemper I am testing the automated install on a new flashed sd card now , with the 5/23 32 bit image

sdetweil · Jun 7, 2023, 9:33 PM

@butchkemper I installed with my automated script and all is working as expected. I added my MMM-Config module which uses socketio to the backend form and it works without problem…

as a test

rename your MagicMirror folder to some other name
and then run the automated install script… see
https://github.com/sdetweil/MagicMirror_scripts

pi@raspberrypi:~/MagicMirror/config $ uname -a
Linux raspberrypi 6.1.21-v7+ #1642 SMP Mon Apr  3 17:20:52 BST 2023 armv7l GNU/Linux
pi@raspberrypi:~/MagicMirror/config $ lsb_release -a
No LSB modules are available.
Distributor ID:	Raspbian
Description:	Raspbian GNU/Linux 11 (bullseye)
Release:	11
Codename:	bullseye
pi@raspberrypi:~/MagicMirror/config $ node -v
v16.20.0
pi@raspberrypi:~/MagicMirror/config $ npm -v
8.19.4
pi@raspberrypi:~/MagicMirror/config $

butchkemper · Jun 8, 2023, 8:57 PM

@sdetweil

Sam,

I did a complete new MM install using your automated scripts and found the error message is still issued.

I found the error messages correlate to modules making network requests for data updates.

My next step is to build a SDcard and see what happens.

Thank you for your assistance.

Butch

sdetweil · Jun 9, 2023, 11:15 AM

@butchkemper let us know how it goes…

butchkemper · Jun 13, 2023, 9:23 PM

Sam,

I built a new SDcard for Raspios and installed MM using your scripts. Started MM and the problem did not occur.

Next, I rebuilt the SSD with Raspios and installed MM. Started MM and the problem did not occur at startup and I waited while tailing the logs but nothing happened.

Next, I move my MM configuration changes, modules, and updates to the SSD. The problem did not occur at startup or after tailing the logs for a time.

I am declaring a victory for me. But we all know, in the end, that the computer demons won.

Butch