MMM-Pir Issue

Feedy88

Hi all,

I have issues with the MMM-Pir module. I recently finished my mirror and put it onto the wall which all worked fine but it randomly shutdown. I have no idea why that happend but I found out it happend when I manage the start of Magic Mirror with pm2, but not when manually starting with “npm run” in a screen or with nohup, so I decided to move away from pm2 and created a systemd unit instad. So far, so good.

As I didn’t need pm2 I removed it from the raspi. Starting the Mirror with the Unit work fine but on Startup I see an Error Message from the PIR module that 1 needed Library is not loaded. The popup on top on starting up shows it is onoff. I tried rebuilding MMM-Pir and also manually installing onoff with the global flag but no with no avail.

So the main two changes between WAI and not working at all are

Uninstall of pm2
changing the address in the config from localhost to 0.0.0.0

Config for Pir Module:

{
	module: 'MMM-Pir',
	position: 'top_right',
	config: {
	  debug: false,
	  delay: 2 * 60 * 1000,
	  turnOffDisplay: true,
	  mode: 9,
	  ecoMode: true,
	  displayCounter: true,
	  displayBar: true,
	  displayStyle: "Text",
	  displayLastPresence: tru
	  lastPresenceTimeFormat: 
	  mode6_gpio: 20,
	  mode6_clearGpioValue: tr
	  pir_gpio: 18,
	  pir_reverseValue: false,
	  xrandrForceRotation: "no
	  //wrandrForceRotation: "
	}
  },

Can anyone help how I can get the Pir Module woring again? Happy to provide logs and config if needed. Thanks!

kayakbabe

@Feedy88 said in MMM-Pir Issue:

localhost to 0.0.0.0

localhost is normally the same as 127.0.0.1 for most computers. Why are you wanting it to be 0.0.0.0?

bugsounet

Hi, npm run rebuild command inside MMM-Pir folder will help

Feedy88

This post is deleted!