Read the statement by Michael Teeuw here.
No Web UI with MMM-FastNotes
-
@rvnbrg did you chnage the MM configuration to allow outside systems to access MM?
in config.js
address:"0.0.0.0", // this means accept incomming connections on any network ipWhitelist:[], // do not filter the source system requests
by default, MM is built as a mirror on the wall, with NO access from outside
address:"localhost", // this means ONLY apps INSIDE the same system can connect ipWhitelist:["127.0.0.1"...].
-
@sdetweil Yes, current setup in config is
"address": "0.0.0.0", "ipWhitelist": [], "locale": "en-US", "logLevel": [ "INFO", "LOG", "WARN", "ERROR" ],
-
@rvnbrg the module config has this
host: "192.168.1.1", // address of raspberry pi in local network, need for access to WEB UI port: 5000, // port on host where UI will be accessible via web browser
I don’t know that that means…
what url are you using?
-
@sdetweil I have
host: “192.168.78.30”, // address of raspberry pi in local network, need for access to WEB UI
port: 5000, // port on host where UI will be accessible via web browserWhere “192.168.178.30” is the ip adress of my raspberry
-
So I try to access the Web UI with: 192.168.178.30:5000
-
@rvnbrg said in No Web UI with MMM-FastNotes:
192.168.178.30
that is an odd home network address…
if you do
ip addrfrom a terminal window, is that the address you get?
-
@sdetweil This is what I get
xavier@raspberrypi:~ $ ip addr
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host noprefixroute
valid_lft forever preferred_lft forever
2: wlan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
link/ether b8:27:eb:69:7b:37 brd ff:ff:ff:ff:ff:ff
inet 192.168.178.30/24 brd 192.168.178.255 scope global noprefixroute wlan0
valid_lft forever preferred_lft forever
inet6 fd48:42be:e531:6cb0:2d2a:6ab4:13e2:1d5a/64 scope global dynamic noprefixroute
valid_lft 1624sec preferred_lft 1624sec
inet6 fe80::56dd:2b5f:e33f:829e/64 scope link noprefixroute
valid_lft forever preferred_lft forever -
@rvnbrg said in No Web UI with MMM-FastNotes:
192.168.178.30
ok, so you should be able to connect to MM using the port from config.js
-
@sdetweil Yes that works to see the MM on my desktop web browser.
Only the FastNotes WebUI does not load -
@rvnbrg ok, looking at the code, it looks like there is a python script that provides that UI
so, in the module folder do
python3 FastNotes.py --host 192.168.178.30 --port 5000 --debug