Read the statement by Michael Teeuw here.
MMM-CalendarExt3 24hr time
-
I’m having some difficulty getting the module to show 24hr time instead of 12. Raspberry Pi 4 set to 24 hour time, and config.js is set with locale: “en-US” and timeformat: 24. Other modules show 24hr time, but Google calendar doesn’t. When viewing calendar.google.com, 24hr time is shown.
Any insights?
-
Thank you.
I used the following in the Ext3 section and it seemed to work:
locale: “en-GB”,
eventTimeOptions: {timeStyle: ‘short’}, -
@siujd2001 can you show the ext3 config?
-
I also have MMM-Config installed if that makes a difference.
/* Config Sample * * For more information on how you can configure this file * see https://docs.magicmirror.builders/configuration/introduction.html * and https://docs.magicmirror.builders/modules/configuration.html * * You can use environment variables using a `config.js.template` file instead of `config.js` * which will be converted to `config.js` while starting. For more information * see https://docs.magicmirror.builders/configuration/introduction.html#enviromnent-variables */ let config = { address: "localhost", // Address to listen on, can be: // - "localhost", "127.0.0.1", "::1" to listen on loopback interface // - another specific IPv4/6 to listen on a specific interface // - "0.0.0.0", "::" to listen on any interface // Default, when address config is left out or empty, is "localhost" port: 8080, basePath: "/", // The URL path where MagicMirror² is hosted. If you are using a Reverse proxy // you must set the sub path here. basePath must end with a / ipWhitelist: ["127.0.0.1", "::ffff:127.0.0.1", "::1"], // Set [] to allow all IP addresses // or add a specific IPv4 of 192.168.1.5 : // ["127.0.0.1", "::ffff:127.0.0.1", "::1", "::ffff:192.168.1.5"], // or IPv4 range of 192.168.3.0 --> 192.168.3.15 use CIDR format : // ["127.0.0.1", "::ffff:127.0.0.1", "::1", "::ffff:192.168.3.0/28"], useHttps: false, // Support HTTPS or not, default "false" will use HTTP httpsPrivateKey: "", // HTTPS private key path, only require when useHttps is true httpsCertificate: "", // HTTPS Certificate path, only require when useHttps is true language: "en", locale: "en-US", logLevel: ["INFO", "LOG", "WARN", "ERROR"], // Add "DEBUG" for even more logging timeFormat: 24, units: "metric", modules: [ { module: "alert", }, { module: "updatenotification", position: "top_bar" }, { module: "clock", position: "top_left" }, { module: 'MMM-2Day-NOAA-Forecast', position: 'top_right', config: { lat: LAT, lon: LONG, units: 'imperial', fontSize: '32px', interval: 10 * 60 * 1000 } }, { module: "MMM-OnThisDayWikiApi", position: "top_center", // All available positions // <= this works in landscape // position: "middle_left", // trying for vertical mode config: { // See below for configurable options, this is optional reloadInterval: 10000 } }, { module: "calendar", /* default/calendar module configuration */ // position: "top_left", config: { broadcastPastEvents: true, // <= IMPORTANT to see past events calendars: [ { url: "webcal://www.calendarlabs.com/ical-calendar/ics/76/US_Holidays.ics", name: "us_holiday", // <= RECOMMENDED to assign name color: "orange" // <= RECOMMENDED to assign color }, { url: "CALENDAR", name: "NAME", color: "purple" }, ] } }, { module: "MMM-CalendarExt3", // position: "bottom_bar", position: "lower_third", // <= works in landscape mode // position: "upper_third", // trying for vertical mode title: "", config: { mode: "month", instanceId: "basicCalendar", locale: 'en-US', maxEventLines: 5, firstDayOfWeek: 0, calendarSet: ['us_holiday', 'CALENDAR'], eventTransformer: (event) => { if (event.title.search("STB") > -1) event.color = "blue"; else if (event.title.search("St. B") > -1) event.color = "blue"; else if (event.title.search("FMCHS") > -1) event.color = "green"; else if (event.title.search("B-Day") > -1) event.color = "red"; // else if (event.description.search("Birthday") > -1) event.color = "red"; // else if (event.getDescription()?.toLowerCase().includes("birthday")) event.setColor(CalendarApp.EventColor.red); return event; } } }, { module: "MMM-Dad-Jokes", position: "top_center", // <= this works in landscape mode // position: "middle_right", // <= trying for vertical mode // color: "red", config: { updateInterval: 15000 } }, { module: 'MMM-Pir', position: 'top_left', config: { debug: false, Display: { // timeout: 2 * 60 * 1000, timeout: 60 * 1000, animate: true, // style: 1, stile: 2, colorFrom: "#FF0000", colorTo: "#00FF00", // mode: 1, mode: 2, counter: true, lastPresence: true, lastPresenceTimeFormat: "LL H:mm", availability: false, // availability: true, autoDimmer: false, xrandrForceRotation: "normal", wrandrForceRotation: "normal", wrandrForceMode: null, waylandDisplayName: "wayland-0", relayGPIOPin: 0 }, Pir: { mode: 0, // gpio: 21 gpio: 4 }, Motion: { deviceId: 0, captureIntervalTime: 1000, scoreThreshold: 100 }, Cron: { ON: [], OFF: [] }, Touch: { mode: 3 }, Governor: { sleeping: 4, working: 2 }, Sounds: { on: "open.mp3", off: "close.mp3" } } }, ] }; /*************** DO NOT EDIT THE LINE BELOW ***************/ if (typeof module !== "undefined") { module.exports = config; } -
@siujd2001 you need to set the eventTimeOptions in ext3


-
Thank you.
I used the following in the Ext3 section and it seemed to work:
locale: “en-GB”,
eventTimeOptions: {timeStyle: ‘short’}, -
@siujd2001 awesome
-
S sdetweil has marked this topic as solved on
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login