Version 2.30.0 weather module, stuck loading, worked fine before upgrade

[sdetweil]

@butchkemper modules can go anything they want
what is used internally can be anything required

I looked at the doc for the default weather module before posting above. as there are two instances, one works the other doesn’t. apikey is the issue

[Assassins]

Work on 2.29.0 with api2.5

But now on 2.33.0
It say “NaN”
I get the error 401, it say the apiKey i wrong, but is write from my api key from the website.
How can i get a apiKey to api3.0 without to paid for it. ???
The api2.5 still work, but not on this modul.

    {
      module: 'weather',
      position: 'bottom_left',
      header: 'Ballerup',
      config: {
         lat: "55.7317",
         lon: "12.3633",
         apiKey: "xxxxx765xxxx98xxxjhx888"
       }
    },

[sdetweil]

@Assassins you cannot get V3 apikey from open weather without providing a credit card.
they don’t charge unless you go over 1000/request per day.

now, you CAN make 2.5 work (if they still accept api requests they keep telling us they are going to do (have done!!)) just be warned that they can/will end this function sometime…

in the module config section
apiKey: 2.5_key
apiVersion: 2.5

and

weatherEndpoint: “current” OR “forecast”

edited

[Assassins]

@sdetweil
I can only see the header now, where is write Ballerup

{
  module: 'weather',
  position: 'bottom_left',
  header: 'Ballerup',
  config: {
    apiVersion: "2.5",
    weatherEndpoint: "/current",
     lat: "55.7317",
     lon: "12.3633",
     apiKey: "xxxxx765xxxx98xxxjhx888"
   }
},

[sdetweil]

@Assassins

sorry

weatherEndpoint: “current” or 'forecast" , no /

also, the old api use location or locationID, not lat/lon
and I see you can’t look them up anymore on OWM site

here is from the old doc

locationID	Location ID from OpenWeatherMap This will override anything you put in location.

Leave blank if you want to use location. <------=======

Example: 1234567
Default value: false

Note: When the location and locationID are both not set, the location will be based on the information provided by the calendar module. The first upcoming event with location data will be used.

======================================================================
location	The location used for weather information.

Example: 'Amsterdam,Netherlands'
Default value: false

Note: When the location and locationID are both not set, the location will be based on the information provided by the calendar module. The first upcoming event with location data will be used.

so it ‘seems’ that location by itself would do it.

[Assassins]

@sdetweil
This is the same, can only see the header.
Is work yesterday on MM 2.29.0

{
  module: 'weather',
  position: 'bottom_left',
  header: 'Ballerup',
  config: {
    apiVersion: '2.5',
   apiBase: 'https://api.openweathermap.org/data/',
    weatherEndpoint: '/no',
    location: 'Ballerup',
    locationID: '2624341',
    apiKey: 'BBnjsdnsdfnsdj8789dsfjsdnfnXX',
    showHumidity: true,
    initialLoadDelay: 1500
  }
},

[sdetweil]

@Assassins said in Version 2.30.0 weather module, stuck loading, worked fine before upgrade:

apiBase: ‘https://api.openweathermap.org/data/’,
weatherEndpoint: ‘/no’,

no apiBase, that didn’t change

the weatherEndpoint is either “current” OR “forecast”

I originally gave them to you with leading / , so my comment was without the / (no /)

[Assassins]

@sdetweil
Is the same mate

{
  module: 'weather',
  position: 'bottom_left',
  header: 'Ballerup',
  config: {
    apiVersion: '2.5',
    weatherEndpoint: 'current',    // i have try the forecast to
    location: 'Ballerup',
    locationID: '2624341',
    apiKey: 'xxjljkjsksldjkj3478bjjk',
    showHumidity: true,
    initialLoadDelay: 1500
  }
},

[sdetweil]

@Assassins seems it doesn’t work anymore… using my old 2.5 key I get code failure with openweathermap

but we changed the sample defaults to a free provider that might work

		{
			module: "weather",
			position: "top_right",
			config: {
				weatherProvider: "openmeteo",
				type: "current",
				lat: 40.776676,
				lon: -73.971321
			}
		},
		{
			module: "weather",
			position: "top_right",
			header: "Weather Forecast",
			config: {
				weatherProvider: "openmeteo",
				type: "forecast",
				lat: 40.776676,
				lon: -73.971321
			}
		}

[Assassins]

@sdetweil said in Version 2.30.0 weather module, stuck loading, worked fine before upgrade:

@Assassins seems it doesn’t work anymore… using my old 2.5 key I get code failure with openweathermap

Strange, works on my sd card with MM2.29.0 and also works on MMM-DynamicWeather and on MMM-WeatherOrNot with MM2.33.0.
Don’t know why openweathermap doesn’t work with MM2.33.0.
Besides that, it may have something to do with the code in MM2.33.0 that has been rewritten.