Read the statement by Michael Teeuw here.
Black screen on the radxa ROCK 2F, using docker
-
Hello,
I have a problem with my Mirror Docker.
My hardware is not a Raspberry PI but a radxa ROCK 2F with a 128 GB SC card.
I have Docker and Portainer installed, and of course also the Mirror Docker software.
When I start the Docker container, I get a black screen and unfortunately, no content from the Mirror software is displayed.I get the following error when starting the labwc container:
2025-03-31T16:06:59.604820724Z chown: cannot access ‘/run/user/1001/gvfs’: Permission denied
986
2025-03-31T16:06:59.653329660Z 00:00:00.000 [INFO] [seatd/seatd.c:167] Removing leftover socket at /run/seatd.sock
987
2025-03-31T16:06:59.653921766Z 00:00:00.000 [INFO] [seatd/seat.c:48] Created VT-bound seat seat0
988
2025-03-31T16:06:59.654542456Z 00:00:00.001 [INFO] [seatd/seatd.c:194] seatd started
989
2025-03-31T16:06:59.785464662Z 00:00:00.132 [INFO] [seatd/server.c:145] New client connected (pid: 16, uid: 1000, gid: 1000)
990
2025-03-31T16:06:59.785672337Z 00:00:00.132 [INFO] [seatd/seat.c:239] Added client 2 to seat0
991
2025-03-31T16:06:59.786233817Z 00:00:00.132 [INFO] [seatd/seat.c:563] Opened client 2 on seat0
992
2025-03-31T16:06:59.797688879Z 00:00:00.144 [ERROR] [seatd/seat.c:387] Could not make device fd drm master: Device or resource busy
993
2025-03-31T16:07:00.061181559Z libEGL warning: egl: failed to create dri2 screen
994
2025-03-31T16:07:00.061300855Z 00:00:00.278 [ERROR] [EGL] command: eglInitialize, error: EGL_NOT_INITIALIZED (0x3001), message: “DRI2: failed to create screen”
995
2025-03-31T16:07:00.085743162Z libEGL warning: egl: failed to create dri2 screen
996
2025-03-31T16:07:00.085860708Z 00:00:00.303 [ERROR] [EGL] command: eglInitialize, error: EGL_NOT_INITIALIZED (0x3001), message: “DRI2: failed to create screen”
997
2025-03-31T16:07:00.110807617Z 00:00:00.457 [INFO] [seatd/client.c:496] Client disconnected
998
2025-03-31T16:07:00.110951123Z 00:00:00.457 [ERROR] [seatd/seat.c:442] Could not revoke drm master on device fd: Invalid argument
999
2025-03-31T16:07:00.111026375Z 00:00:00.457 [INFO] [seatd/seat.c:158] No clients on seat0 to activate
1000
2025-03-31T16:07:00.111250092Z /entrypoint.sh: line 21: 16 Segmentation fault labwcThe MM container keeps restarting because it doesn’t have a display:
2025-03-31T16:09:56.570445772Z [58:0331/180956.569442:ERROR:ozone_platform_x11.cc(245)] Missing X server or $DISPLAY
988
2025-03-31T16:09:56.571702893Z [58:0331/180956.570634:ERROR:env.cc(258)] The platform failed to initialize. Exiting.
989
2025-03-31T16:09:57.087712870Z /opt/magic_mirror/node_modules/electron/dist/electron exited with signal SIGSEGVWhat do I have to do to get the labwc container to start or initialize the display?
Thank you very much for any information.
Best regards,
Olaf
-
@ajoreis said in Black screen on the radxa ROCK 2F, using docker:
Segmentation fault labwc
that tells you that
labwccrashes, further investigation without having the used hardware is impossible. -
@karsten13 this seems telling
chown: cannot access ‘/run/user/1001/gvfs’: Permission denied
-
@karsten13 Hello,
I’ve given up. I’ve tried the following.
I created a new image, currently only available for the Rock-F2.
A Debian Bullseye Desktop LXDM display manager (Debian Xfce) without an X server.
I’m currently using an RPi 3 again, and I’ve managed to get everything working.Thanks very much for your support.
Olaf
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login