remote control help needed

sdetweil

@tommyk mm is meant to be a closed system on the wall…

no one needs to access this, as its output only… SO

the default config says ONLY apps INSIDE this SAME machine can access the MM server
localhost is the name of the network connection (loop back)

now, it so happens one could add controls to limit JUST ONE (or a few) machines too…
this is the ipWhitelist

but as we’ve seen that (output only with no external access) doesn’t work for a number of use cases.
remote control, my mmm-config, …

SO, changing the config
address means listen for incoming requests on A network adapter, wifi OR ethernet…
address=“192.168.2.106” (for my desktop ethernet address)
but what if you have both? or more than one…
you can ONLY put ONE address there…
so there is a shortcut , “0.0.0.0”, means listen on ALL adapters, regardless their address…

now… i’ll just make an example, not implying anything…

you built this thing, and if ANYONE in your house could get in and fiddle with the MM parts, or others,
they might take the system down or something else…
kids that don’t know, but LOVE to explore…!!
how can i keep THEM out…

we I could limit access to ONLY MY phone, laptop,… then they couldn’t get in…
so you could put your phone and laptop ip addresses in the ipWhitelist:[] list
and then only YOU can get into the MM app system …

the RemoteControl readme, mentions this change in the config…

tommyk

@sdetweil yes, I understand what you are saying sam
but if I put 0.0.0.0 as per instructions anyone can access it, right ?
so I dont get why I cant
phone app says error with javascript

I am at my wits end lol

sdetweil

@tommyk only anyone on your home network… not anyone in the world…

I don’t know on the phone app… I didnt install the app…

tommyk

@sdetweil yep right
there is only me using the mirror
so when I run MM
RC shows the bar code and ip address
when I scan code it tries to connect to app
it says… error when trying to to load javascript file

sdetweil

@tommyk ok, I just added the QR to mine,

what is the address shown under the QR code??
mine shows

http://192.168.2.106:8090/remote.html

which is my server address, and port
here is those values in my config.js

    address: "0.0.0.0",
    port: 8090,
    ipWhitelist: [],

the app opens on my phone correctly
same view as on my computer

tommyk

http://192.168.1.172:8080/remote.html

tommyk

@sdetweil let config = {
address: “0.0.0.0”,
port: 8080,
ipWhitelist: [],

sdetweil

@tommyk and using

That url in browser on phone does not work? (Bypass qr)

But if you do

http://192.168.1.172:8080

Brings up the MagicMirror page on phone?

tommyk

@sdetweil ok tried that. still no joy
will have to try again tomorrow
thanks again
tommyk

sdetweil

@tommyk no joy at what? Opening the MagicMirror page?