What Monitor did you use?

MichMich

@paviro Then your mirror would be inverted. ;)

paviro

Mhh that’s right :/ So it’s OLED I guess :D

KirAsh4

Man those are expensive though …

paviro

@KirAsh4 yeah sadly… We will probably have to wait a few more years for that :(

Bangee

I use this monitor:

https://www.digitec.ch/de/s1/product/samsung-s24e650pl-24-60cm-250cdm-1920-x-1080-pixel-schwarz-monitor-5647268

Kobie

I got this one for 200 euro in MediaMarkt:

http://tweakers.net/pricewatch/435115/lg-27mp37vq-b-zwart.html

It’s very thin - especially without the bezel (I think it’s 13mm at its thickest) and the control board is completely detachable and only slightly bigger than the Raspberry Pi. It was a very easy install. Only downside is that the HDMI cable comes straight out - the back they all seem to these days. I solved this with a 90 degree HDMI cable.

eric

I can advise to use use ViewSonic!
e.g.:
https://www.amazon.de/gp/product/B00K6E8ACU/ref=oh_aui_detailpage_o07_s00?ie=UTF8&psc=1
I used now two of them for both: it’s not too difficult to get rid of the bezel, they are very slim, and all connectors showing down

br!

dmcinnes

I also used a ViewSonic, this 24 inch:
https://www.amazon.com/Viewsonic-VA2446M-LED-24-Inch-1080p-Monitor/dp/B00D601UC8
Like Eric said, the bezel came off fairly easily and it’s slim. Plus it’s only $129.99 right now!

sero

I used an Asus MB169B+ which is an external USB C monitor. It’s extremely thin, but I had to get a controller on eBay, since the included controller has only the USB-port (and uses DisplayLink).

https://www.asus.com/Monitors/MB169C-plus/

MichMich

@sero That’s a sexy monitor! :)