Magic Mirror on the Raspberry Pi 1, agonizingly difficult

MMRPi1

Hi again…
Everything works fine but I can’t get the mirror to auto run (in server only mode) at boot.
Any help would be appreciated…
(BTW I tried configuring the LXDE and boot files and all that)

bhepler

@MMRPi1 Did you try the pm2 route from the Auto Starting Magic Mirror? @Sean gave you the link a few days ago.

In your case, you’ll want to change the mm.sh script to start in server-only mode and then launch your web browser. If you really want to bulletproof your installation, you can create a separate script for the mirror in server-only mode and another for keeping the browser up & pointed at the correct location. Let PM2 manage both as separate processes.

MMRPi1

@bhepler Thanks, but since I’m really clueless I’m not quite sure what to do…
The contents of mm.sh
cd ~/MagicMirror
DISPLAY=:0 npm start
node serveronly
chromium-browser --noerrdialogs --disable-session-crashed-bubble -incognito --kiosk http://localhost:8080

I’'ve also got the following at the end of the LXDE autostart file
@pm2 start mm.sh

BTW: when I run pm2 start mm.sh from the terminal the mirror starts up just fine, so I don’t know why it doesn’t autostart properly…

bhepler

No problem. It’s confusing at first for just about everybody.

@MMRPi1 said in Magic Mirror on the Raspberry Pi 1, agonizingly difficult:

The contents of mm.sh
cd ~/MagicMirror
DISPLAY=:0 npm start
node serveronly
chromium-browser --noerrdialogs --disable-session-crashed-bubble -incognito --kiosk http://localhost:8080

Your script is attempting to start the Magic Mirror twice. DISPLAY=:0 npm start will start the mirror via electron. That line would normally blank the Pi’s screen, start up the MM process and display the interface. You probably want to remove this line.
The line node serveronly starts up the MM process as well, but only to provide the interface to web browsers. And your final line opens the web browser.

So. Try deleting the DISPLAY=:0 npm start line and then testing your script.

cd ~
./mm.sh

That should start the MM process and open up your web browser to the interface. Let us know how it goes!

I’'ve also got the following at the end of the LXDE autostart file
@pm2 start mm.sh

Yeah, delete that line.

BTW: when I run pm2 start mm.sh from the terminal the mirror starts up just fine, so I don’t know why it doesn’t autostart properly…

Oh. Easy enough to fix. Do just what you said, run pm2 start mm.sh. Once the browser is up, switch to the terminal on the pi and tell PM2 to save the current state. pm2 save. One you do that, PM2 should start with the pi and then start the MM process and your browser.

Edited to add: Did you run the pm2 startup and then copy & paste the command it gave as per the instructions?

MMRPi1

It worked!!!
Turns out I didn’t run pm2 startup (feeling a bit stupid)
Thank you so much to everyone, I couldn’t have done it without you XD

MMRPi1

Hi again…
My mirror seems to be a bit sluggish… (I installed a third party stock ticker)
Apart from decreasing animation time is there any way to improve this??

teitlebot

for some reason im having the same problem and it wont load the browser from the shell script. not sure why