MMM-Domiticz

Pl4nk

This post is deleted!

sdetweil

@Awn on the magicmirror, using the keyboard, open the developers window, ctrl-shift-i,
select the tab labeled console, on the window that opens, scroll up to see any errors

u may also have to look in the terminal window log for errors from the node_helper

these will be in the pm2 logs if using pm2.

do

pm2 logs --lines=100

Jo-Rien

I am not getting a neat list with this module, all readings from my temperature meters is shown on two lines and it’s kinda messing up the screen. Any idea what the problem is?

ToniNappi

Is it possible also exclude sensors from the displayed data? I have about 50 temp sensors and obviously I want only see the most important ones. I tried to put them in exlude list, but it doesn’t seem to work. Nice module still!

Toni

najtram

Hi, there.

Great module!
It’s passing the described data perfectly except one of my top desired data.

I’d really love to see “CounterToday” and “Data” from my Enphase Envoy.
Since this is a kWh subtype it looks like I’m really close, but somehow I only see my P1 data.

  {
     "AddjMulti" : 1.0,
     "AddjMulti2" : 1.0,
     "AddjValue" : 0.0,
     "AddjValue2" : 0.0,
     "BatteryLevel" : 255,
     "CounterToday" : "0.117 kWh",
     "CustomImage" : 0,
     "Data" : "486.173 kWh",
     "Description" : "",
     "Favorite" : 0,
     "HardwareID" : 9,
     "HardwareName" : "Enphase Envoy",
     "HardwareType" : "Enphase Envoy with LAN (HTTP) interface",
     "HardwareTypeVal" : 108,
     "HaveTimeout" : false,
     "ID" : "00000901",
     "LastUpdate" : "2020-09-13 08:31:50",
     "Name" : "Enphase kWh Production",
     "Notifications" : "false",
     "Options" : "",
     "PlanID" : "0",
     "PlanIDs" : [ 0 ],
     "Protected" : false,
     "ShowNotifications" : true,
     "SignalLevel" : "-",
     "SubType" : "kWh",
     "SwitchTypeVal" : 0,
     "Timers" : "false",
     "Type" : "General",
     "TypeImg" : "current",
     "Unit" : 1,
     "Usage" : "280 Watt",
     "Used" : 1,
     "XOffset" : "0",
     "YOffset" : "0",
     "idx" : "748"
  },

Sp0nsje

Hi thanks for the great work,

Is there a better guide on how to implement certain sensors ?
like an ‘‘IDX xx’’ value or something

{
                        module: "MMM-Domoticz",
                        position: "bottom_right",   // see mirror setting for options
                        config: {
                                updateInterval: 5, // every 45 seconds
                                apiBase: "192.168.178.44",
                                apiPort: 18080,
                                apiUser: "MagicMirror",
                                apiPw: "MagicMirror",
                                moduleTitle: "My smart home by Domoticz",
                                energyTitle: "Energy used by",
                                batteryTitle: "Battery level",
                                coTitle: "CO2 level",
                                blindsTitle: "Blinds",
                                energyNow: "Currently using",
                                energyTotal: "Energy used",
                                energyToday: "Energy used today",
                                batteryThreshold: 20,
                                coThreshold: 650,
                                subMenus: true,
                                smartMeter: false,
                                smartMeterOffset: 0,
                                showItems: ['temperature'], //,'energy','battery','co','blinds','humidity','baro','usage','voltage','alarm','sensor','pulse','meter','rain'],
                                excludeDevices: ['none','include your own'],  // Device that will not be shown
                                onlyShowExcluded: false, // if true only exluded devices are shown
                                textWhite: true,
                                alarmOffLabel: "Disabled",
                                groupSensors: false,
                        }
                },

i can only show the temperatures when i select al the data it wil hang on Loading Domoticz Data…

would appriciate different screenshots of codes / layouts on the MM2

Mazzokun

I think there is something broken into code or there is some dependence-package with raspberryOs…
In Domoticz I have 30+ devices and In MM shows only a meter device with 0,0,0 values ( I have 3 meter device, no possible value)…
If I try open the json url into chromium it says error 401 forbidden, but if I try the same url into Mac safari it simple works.
Any Idea?

MisterT

Hi @Mazzokun
I had a problem with this module and with the help of @sdetweil a New code is available here. It works with domoticz password

[link text] https://forum.magicmirror.builders/topic/11123/mmm-domoticz-cannot-read-property-0-of-undefined/13?page=2
(link url)

Enjoy

art212

Hi, Are Domoticz and Magic Mirror installed on one Raspberry Pi? Are they two separate?

MisterT

@art212 Domoticz and Magic mirror are separate. In the config.js, just complete the Ip adress of Domoticz Device and Domoticz user and password if need. In my case, Domoticz is on a raspberry and my magic mirror on a other one