MMM-voice setup but MagicMirror wont display

shazglass

I have my mic plugged into a USB sound card on my pi. Is that ok, or should I plug it directly into the audio of the pi? My mic is not a USB connection.

cyberphox

Run this from terminal

cat /proc/asound/cards

and see if your microphone is listed as : 1

shazglass

@cyberphox said in MMM-voice setup but MagicMirror wont display:

cat /proc/asound/cards

this is the response:

pi@raspberrypi:~ $ cat /proc/asound/cards
0 [ALSA ]: bcm2835_alsa - bcm2835 ALSA
bcm2835 ALSA
pi@raspberrypi:~ $

shazglass

@cyberphox said in MMM-voice setup but MagicMirror wont display:

cat /proc/asound/cards

the one above I took the USB sound card out and plugged the mic directly to the pi.

this one I did your command again with the sound card in the USB slot and mic connected to USB sound card:
pi@raspberrypi:~ $ cat /proc/asound/cards
0 [ALSA ]: bcm2835_alsa - bcm2835 ALSA
bcm2835 ALSA
1 [Device ]: USB-Audio - USB Audio Device
GeneralPlus USB Audio Device at usb-3f980000.usb-1.3, full speed

shazglass

I have gone onto the pi itself and chossen the usb as an audio device with clicking microphone and microphone capture… but still shows the “error” in MM display.

cyberphox

and you ran the dependencies script from the installers folder?

cyberphox

mine was error cause i accidentally cloned into MMM-Voice…capital V and it didnt create the dic file…
maybe try running npm start dev and see what errors you have in the console

shazglass

@cyberphox yes, that I def did -was super careful with that.

shazglass

@cyberphox heres what I get with the npm start dev…not sure I am doing this in the right dir. I checked the Capital V or v, and mine is def lowercase v

pi@raspberrypi:~/MagicMirror/modules/MMM-voice $ npm start dev
npm ERR! missing script: start

npm ERR! A complete log of this run can be found in:
npm ERR! /home/pi/.npm/_logs/2018-04-07T15_24_32_070Z-debug.log

shazglass

pi@raspberrypi:~/MagicMirror $ npm start dev

magicmirror@2.3.1 start /home/pi/MagicMirror
sh run-start.sh “dev”

Starting MagicMirror: v2.3.1
Loading config …
Loading module helpers …
No helper found for module: alert.
Initializing new module helper …
Module helper loaded: updatenotification
No helper found for module: clock.
Initializing new module helper …
Module helper loaded: MMM-EARTH
No helper found for module: compliments.
No helper found for module: currentweather.
No helper found for module: weatherforecast.
No helper found for module: MMM-CountDown.
Initializing new module helper …
Module helper loaded: MMM-voice
No helper found for module: MMM-QRCode.
Initializing new module helper …
Module helper loaded: newsfeed
All module helpers loaded.
Starting server on port 8080 …
Server started …
Connecting socket for: updatenotification
Connecting socket for: MMM-EARTH
Starting module: MMM-EARTH
Connecting socket for: MMM-voice
Starting module helper: MMM-voice
Connecting socket for: newsfeed
Starting module: newsfeed
Sockets connected & modules started …
Launching application.
https://epic.gsfc.nasa.gov/api/natural
Create new news fetcher for url: http://ewn.co.za/RSS Feeds/Latest News - Interval: 300000
MMM-voice: Checking files.
MMM-voice: Starting pocketsphinx.
Shutting down server…
Stopping module helper: updatenotification
Stopping module helper: MMM-EARTH
Stopping module helper: MMM-voice
Stopping module helper: newsfeed