@Mykle1
I would just like to say a MASSIVE and HUGE THANK YOU to you for helping me fix the problem I was experiencing!! I PM’ed you and you have spend the last 10 minutes of your Sunday helping out a complete stranger who half the time didn’t know what you were asking me to do.
So, you will be mentioned in my son’s science project that he has chosen to do the MM on.
without you, there was no WOW factor! @Mykle1 - you are an ANGEL!!! thank you so much!!! x

I did find this in the cd MagicMirror???

pi@raspberrypi:~/MagicMirror $ pm2 log MagicMirror
[TAILING] Tailing last 15 lines for [MagicMirror] process (change the value with --lines option)
/home/pi/.pm2/logs/MagicMirror-out.log last 15 lines:
/home/pi/.pm2/logs/MagicMirror-error.log last 15 lines:
0|MagicMir | at tryModuleLoad (internal/modules/cjs/loader.js:506:12)
0|MagicMir | at Function.Module._load (internal/modules/cjs/loader.js:498:3)
0|MagicMir | at Module.require (internal/modules/cjs/loader.js:598:17)
0|MagicMir | at require (internal/modules/cjs/helpers.js:11:18)
0|MagicMir | Error: ENOENT: no such file or directory, open ‘package.json’
0|MagicMir | at Object.fs.openSync (fs.js:660:18)
0|MagicMir | at Object.fs.readFileSync (fs.js:565:33)
0|MagicMir | at Object. (/home/pi/MagicMirror/js/app.js:15:32)
0|MagicMir | at Module._compile (internal/modules/cjs/loader.js:654:30)
0|MagicMir | at Object.Module._extensions…js (internal/modules/cjs/loader.js:665:10)
0|MagicMir | at Module.load (internal/modules/cjs/loader.js:566:32)
0|MagicMir | at tryModuleLoad (internal/modules/cjs/loader.js:506:12)
0|MagicMir | at Function.Module._load (internal/modules/cjs/loader.js:498:3)
0|MagicMir | at Module.require (internal/modules/cjs/loader.js:598:17)
0|MagicMir | at require (internal/modules/cjs/helpers.js:11:18)

@bhepler hithere
I did as per your instructions - except I dont know how to use the forum markup tool…so just copied and pasted.
I now dont have any instances running? I can only access my mirror if i go ino cd MagicMirror and then type npm install.

pi@raspberrypi:~ $ pm2 stop all
[PM2] Applying action stopProcessId on app [all](ids: 0)
[PM2] MagicMirror ✓
┌─────────────┬──────┬─────────┬───┬─────┬────────┐
│ Name │ mode │ status │ ↺ │ cpu │ memory │
├─────────────┼──────┼─────────┼───┼─────┼────────┤
│ MagicMirror │ fork │ stopped │ 6 │ 0% │ 0 B │
└─────────────┴──────┴─────────┴───┴─────┴────────┘
Use pm2 show <id|name> to get more details about an app
pi@raspberrypi:~ $ pm2 delete MagicMirror
[PM2] Applying action deleteProcessId on app [MagicMirror](ids: 0)
[PM2] MagicMirror ✓
┌──────┬──────┬────────┬───┬─────┬────────┐
│ Name │ mode │ status │ ↺ │ cpu │ memory │
└──────┴──────┴────────┴───┴─────┴────────┘
Use pm2 show <id|name> to get more details about an app
pi@raspberrypi:~ $ pm2 save
[PM2] Saving current process list…
[PM2] Nothing to save !!!
[PM2] In this case we keep old dump file. To clear dump file you can delete it manually !
pi@raspberrypi:~ $ pm2 flush
[PM2] Flushing /home/pi/.pm2/pm2.log
[PM2] Logs flushed
pi@raspberrypi:~ $ pm2 start mm.sh
[PM2][ERROR] script not found : /home/pi/mm.sh
script not found : /home/pi/mm.sh
┌──────┬──────┬────────┬───┬─────┬────────┐
│ Name │ mode │ status │ ↺ │ cpu │ memory │
└──────┴──────┴────────┴───┴─────┴────────┘
Use pm2 show <id|name> to get more details about an app
pi@raspberrypi:~ $ pm2 save
[PM2] Saving current process list…
[PM2] Nothing to save !!!
[PM2] In this case we keep old dump file. To clear dump file you can delete it manually !
pi@raspberrypi:~ $ pm2 start mm
[PM2][ERROR] script not found : /home/pi/mm
script not found : /home/pi/mm
┌──────┬──────┬────────┬───┬─────┬────────┐
│ Name │ mode │ status │ ↺ │ cpu │ memory │
└──────┴──────┴────────┴───┴─────┴────────┘
Use pm2 show <id|name> to get more details about an app
pi@raspberrypi:~ $ pm2 log mm
[TAILING] Tailing last 15 lines for [mm] process (change the value with --lines option)
[PM2][ERROR] No file to stream for app [mm], exiting.
pi@raspberrypi:~ $ pm2 log MagicMirror
[TAILING] Tailing last 15 lines for [MagicMirror] process (change the value with --lines option)
[PM2][ERROR] No file to stream for app [MagicMirror], exiting.
pi@raspberrypi:~ $

@bhepler hi there.
Thank you for the instructions. I did exactly as you said. It has taken away the “mm” instance. I am left with only the MagicMirror one now. However. It will not boot Into mirror mode on start up, although I can see the CPU is being used, so I type pm2 stop MagicMirror and it shows that it has stopped. Only way I can get the mirror to show is by typing cd MagicMirror
Then in that directory I type npm start. It does a small load thing and then my mirror shows. How can I get it to how it should be without having to go into the mirror directory?
Thank you for your patience. Most appreciated!

@mykle1 hi again😉. Yep. I did do that and that’s when both run in the background but none go to mirror mode. Then u suggested going into cd MagicMirror and running npm start and then it goes into mirror mode. I use control q to quit but I still have two instances. I need to delete both and reinstall but without losing my mirror and that’s what I don’t know how to do. I want it back to boot up going straight to mirror mode and then just control q to quit then pm2 stop MagicMirror and pm2 start MagicMirror. Right now I have mm and MagicMirror. I’m just at a loss☹️

Hi everyone.
Please help. I have two instances of mm starting on boot up. I don’t know what I did wrong. When pi starts the cpu is showing movement but doesn’t boot into mm. I have to type is pi pm2 stop mm. Then pm2 stop MagicMirror to stop the cpu usage. I go into cd MagicMirror and type npm start and my mirror starts. Control q and quits. But this isn’t the right way to do it. How and in what directory do I go into to delete pm2 as I have two instances. Thnx everyone. Appreciate all help.

@mykle1 ok. Don’t worry about screen saver. Sorted that out. But not sure how I did it. LOL!

@mykle1 hi. So glad to hear you are doing well. Bit chilly here in SA but all good thnx.
Ok so I went into the MagicMirror module in terminal as you suggested and ran npm start. It ran a whole bunch of lines then went into Mirror mode. Everything is there. Then to stop it I held control + q to stop. It stops it and puts me back to the terminal I started in. How for demo purposes would I go in and out of the mirror now? How do I get it back to easy access? And what did I do wrong? On install when it asked do u want to use pm2 I said Y. Then is new clean terminal I did pm2 startup. I copied and pasted the line required. I rebooted. Then typed nano mm.sh and added ~/MagicMirror
DISPLAY=:0 npm start
Saved then typed
Chmod +x mm.sh
Then typed pm2 save
That’s where I get two instances one MagicMirror that won’t respond until ur way
And the other is mm which I deleted with your thread instructions.
So how do I get easy in and out of mirror mode? Thanx my life saver once again!

Also. I can’t disable the screen saver with the new version. How do I stop it now?
Thnx. Look forward to hearing from you😉

@mykle1 hi again☺️. Hope u are well. I had this same problem. I ran your suggestions and now I only have MagicMirror and not mm. However. When I pm2 start MagicMirror. It shows it’s “online” yet fails to go onto mirror mode. Please help. I don’t want to start from scratch. Also how do I stop the screen going into sleep mode? Thnx @Mykle1 you have been my MM life support thus far!!!

I am NO expert and I could be 100% incorrect, but in your pic of your modules you dont have a return wrapper. you need this }, and you just have this }

I have a rsp3 model b. I am running MM with all default models except calendar. Plus QR-code, pi system stats and MMM-voice with Hello-Lucy. The voice side is so temperamental that sometimes it works and other times it hangs MM. who else is using a rap3 with voice? Please advise if the rsp is letting me down for power or there is something I have done wrong? A newbie here…😉