Read the statement by Michael Teeuw here.
MMM-AssistantMk2
-
@sean thank you very much for the detailed information . Webradio is running !
-
@Sean
Thanks again for all the work and help
So how would I get assistant module to disable and enable the google photo module?
I would like to speak “Hide Photos” and the Google Photos will stop displaying.
I know I need transition hook and command
I tried learning how to do this using your example of hide clock except after I added the code nothing happened. When I say “hide clock” it searches google for hide clock instead of turning off module. So I must be doing something wrong
BTW the hide all command works fine. -
@teitlebot
I don’t know how you do your code. I have no second sight. Show your work to examine. -
Hi @Sean.
I have some questions to ask you:-
I installed AssistantMK2 and Hotword successfully but the only way to wake up the assistant is to say “snowboy”. The hot word “smartmirror” and “jarvis” do not work. Can you help me? (my config.js below…)
-
When I ask for a song on youtube I can not stop the song anymore. The assistant does not listen to me. To talk to the assistant I have to wait for the end of the song. How do I solve?
-
When the assistant begins to speak, he cuts the first words, is it possible to solve?
-
The videos on youtube are reproduced in full screen. Is it possible to reproduce them in a small box (example: bottom right …)?
Thanks you for your great work and patience! :winking_face:
/* Magic Mirror Config Sample * * By Michael Teeuw http://michaelteeuw.nl * MIT Licensed. * * For more information how you can configurate this file * See https://github.com/MichMich/MagicMirror#configuration * */ var config = { address: "localhost", // Address to listen on, can be: // - "localhost", "127.0.0.1", "::1" to listen on loopback interface // - another specific IPv4/6 to listen on a specific interface // - "", "0.0.0.0", "::" to listen on any interface // Default, when address config is left out, is "localhost" port: 8080, ipWhitelist: ["127.0.0.1", "::ffff:127.0.0.1", "::1"], // Set [] to allow all IP addresses // or add a specific IPv4 of 192.168.1.5 : // ["127.0.0.1", "::ffff:127.0.0.1", "::1", "::ffff:192.168.1.5"], // or IPv4 range of 192.168.3.0 --> 192.168.3.15 use CIDR format : // ["127.0.0.1", "::ffff:127.0.0.1", "::1", "::ffff:192.168.3.0/28"], language: "en", timeFormat: 24, units: "metric", modules: [ { module: "MMM-AssistantMk2", position: "top_right", config: { /*useWelcomeMessage: "brief today",*/ deviceLocation: { coordinates: { // set the latitude and longitude of the device to get localized information like weather or time. (ref. mygeoposition.com) latitude: 45.200049, // -90.0 - +90.0 longitude: 7.568917, // -180.0 - +180.0 } }, profiles: { "default" : { // profile name. profileFile: "default.json", // profile file name. lang: "it-IT", //currently available (estimation, not all tested): // de-DE, en-AU, en-CA, en-GB, en-US, en-IN // fr-CA, fr-FR, it-IT, ja-JP, es-ES, es-MX, ko-KR, pt-BR // https://developers.google.com/assistant/sdk/reference/rpc/languages } }, record: { // Full values are in `FOR EXPERTS` section. recordProgram: "arecord", // Defaults to "arecord" - also supports "rec" and "sox" device: "plughw:1" // recording device (e.g.: "plughw:1") }, play: { // Full values are in `FOR EXPERTS` section. playProgram: "mpg321", // recommended. }, notifications: { ASSISTANT_ACTIVATED: "HOTWORD_PAUSE", ASSISTANT_DEACTIVATED: "HOTWORD_RESUME", }, } }, { module: "MMM-Hotword", config: { record: { recordProgram : "arecord", device : "plughw:1", }, autostart:true, onDetected: { notification: function (payload) { return "ASSISTANT_ACTIVATE" }, payload: function (payload){ return { profile: payload.hotword } } }, }, }, { module: 'MMM-Hotword', config: { snowboy: [ { hotwords: "smartmirror", //this will be sent to other module for distinguishing which hotword is detected. file: "resources/models/smart_mirror.umdl", sensitivity: '0.5', }, { hotwords: "snowboy", file: "resources/models/snowboy.umdl", sensitivity: '0.5', }, { file: 'resources/models/jarvis.umdl', sensitivity: '0.8,0.80', hotwords: ['jarvis','jarvis'] //Kitt.ai changed their Jarvis UMDL, it has 2 models in one file. So weird. //anyway, you can give different name for each. ['jarvis_1', 'jarvis_2']. Even though I think this is useless. } ], record: { sampleRate : 16000, // audio sample rate threshold : 0.5, // silence threshold (rec only) thresholdStart: null, // silence threshold to start recording, overrides threshold (rec only) thresholdEnd : null, // silence threshold to end recording, overrides threshold (rec only) silence : 1.0, // seconds of silence before ending verbose : true, // log info to the console. Use this when you want to check mic working or not. recordProgram : 'arecord', // Defaults to 'arecord' - also supports 'rec' and 'sox' device : 'plughw:1' // recording device (e.g.: 'plughw:1') }, autostart: true, // if 'false', this module will wait for 'HOTWORD_RESUME' notification to start hotwords detection at the beginning. autorestart: false, // You can set this 'true' when you want this module to go back to listening mode automatically again after hotword is detected. But use this carefully when your other modules are using microphone or speaker. // customizable notification trigger notifications: { PAUSE: "HOTWORD_PAUSE", RESUME: "HOTWORD_RESUME", LISTENING : "HOTWORD_LISTENING", SLEEPING : "HOTWORD_SLEEPING", ERROR : "HOTWORD_ERROR", }, onDetected: { notification: (payload) => { return "HOTWORD_DETECTED" }, payload: (payload) => { return payload } }, } }, /* { module: 'MMM-pages', config: { modules: [[ "weatherforecast", "newsfeed"], [ "calendar", "compliments" ]], excludes: ["clock", "currentweather", "MMM-page-indicator", "MMM-AssistantMk2"], } }, { module: 'MMM-page-indicator', position: 'bottom_bar', config: { pages: 3, } }, */ { module: "alert", }, { module: "updatenotification", position: "top_bar" }, { module: "clock", position: "top_left" }, { module: "calendar", header: "US Holidays", position: "top_left", config: { calendars: [ { symbol: "calendar-check-o ", url: "webcal://www.calendarlabs.com/templates/ical/US-Holidays.ics" } ] } }, { module: "compliments", position: "lower_third" }, { module: "currentweather", position: "top_right", config: { location: "New York", locationID: "", //ID from http://bulk.openweathermap.org/sample/; unzip the gz file and find your city appid: "YOUR_OPENWEATHER_API_KEY" } }, { module: "weatherforecast", position: "top_right", header: "Weather Forecast", config: { location: "New York", locationID: "5128581", //ID from http://www.openweathermap.org/help/city_list.txt appid: "YOUR_OPENWEATHER_API_KEY" } }, { module: "newsfeed", position: "bottom_bar", config: { feeds: [ { title: "La Stampa", url: "https://www.lastampa.it/rss.xml" } ], showSourceTitle: true, showPublishDate: true } }, ] }; /*************** DO NOT EDIT THE LINE BELOW ***************/ if (typeof module !== "undefined") {module.exports = config;}
-
-
I installed AssistantMK2 and Hotword successfully but the only way to wake up the assistant is to say “snowboy”. The hot word “smartmirror” and “jarvis” do not work. Can you help me? (my config.js below…)
Adjust sensitivity.
When I ask for a song on youtube I can not stop the song anymore. The assistant does not listen to me. To talk to the assistant I have to wait for the end of the song. How do I solve?
set
pauseOnYoutube:false
. You can activate hotword during videoplaying and it will stop the video. Anyway, there is a risk that your video sounds could also activate hotword.When the assistant begins to speak, he cuts the first words, is it possible to solve?
I think you are using HDMI as output. HDMI could have that symptom. Use other output.
The videos on youtube are reproduced in full screen. Is it possible to reproduce them in a small box (example: bottom right …)?
Redefine CSS selector
#ASSISTANT_YOUTUBE
incss/custom.css
. -
@sean said in MMM-AssistantMk2:
Adjust sensitivity.
The sensitivity of the microphone?
If yes, how do you do it?@sean said in MMM-AssistantMk2:
Redefine CSS selector
#ASSISTANT_YOUTUBE
incss/custom.css
.Where should I make this modify?
Thanks a lot!
-
{ hotwords: "smartmirror", file: "resources/models/smart_mirror.umdl", sensitivity: '0.5', // < - SENSITIVITY },
Where should I make this modify?
css/custom.css
-
@jomwells @Sean
I seem to have always had this problem where after a reboot I sometimes need to manually change the hardware number of my usb mic. I saw @jomwells wrote a fix by changing the .asoundrc file but for some reason my system always changes the asoundrc back after any changes I make.
I wonder if you have any ideas of a fix for me? -
@teitlebot
As far as I know, there be alias for device instead cardno. But not sure. I’m not familiar with these things. -
Sorry @Sean I’m new in the MagicMirror environment and I do not know all the components.
Where can I find information on what is needed and how to customize the “custom.css” file?
What do you mean:Redefine CSS selector #ASSISTANT_YOUTUBE in css/custom.css.
MagicMirror use the “custom.css” or “main.css”?
Thanks