Read the statement by Michael Teeuw here.
Strip Down Guide for BenQ 28" VA Monitor GC2870H
-
I have it incorporated in the frame. I drilled a 2 or 3mm hole in the front of the frame and a 8mm hole from the back which only goes half way through. The 8mm are perfect to mount the PIR sensor without the lense. The mirror only activates when you are directly in front of it and it’s hardly visible.
-
@madscientist is it possible to share a photo please?
-
View from the back:
View from the front:
PIR sensor without IR lense and the inside-8mm-hole:
-
@madscientist very well done and looks neat thanks for that
-
What mirror thickness did you choose? 4mm or 6mm? And why?
-
@secdude I chose 4mm glas because it is already heavy enough to mount the mirror like that.
-
@Adrien Do you have already cut the wires of the backlight? Does it work now without HDMI logo? Whats the delay?
-
@flo actually I have not, I power the monitor via my relay and my presence dedection makes me never see the logo so so far there was no need to do that
-
@yep_DD So you would see the logo if you only rely on the PIR? Can you share a picture of the final mirror design? I really like your frame and thinking of buying one myself.
-
@flo no, the “big” Benq logo is disabled via the developer menu of the monitor. You would only see a small “HDMI1” in the lower right. Yeah, I will post a a few pics in an hour when it is a bit darker outside. Hold on :D.
