3. Flick Large gesture control
MagicMirror² v2.7.0 is available! For more information about this release, check out this topic.

Flick Large gesture control

  • R

    Hello all,

    I have tried to use the flick Large sensor together with my Raspberry Pi 2 to control the interface of the MagicMirror, as I have made some pages and wanted to scroll through them.

    What I have managed to do is to control MMM-pages, MMM-page-indicator and the default news module via my MMM-flick module.

    The controls are as follows:

    Swipe Left - Decrement Page
    Swipe Right - Increment Page
    Swipe Up - Show news description
    Swipe Up again - Open News page
    Swipe Up as the news page is opened - Scroll down the news page
    Swipe Down - Close News Page
    Swipe Down again - Close News Description

    I`m currently working on implementing the touch functionality. I want to also have mouse control.

    The code is not perfect, I`m working it.

    Here is the code (note that I have changed some libraries for it to work with the ASUS Tinker Board, as far as I know I`m the only one who has working flicklibs on the TinkerBoard. If someone is interested in getting the flick sensor to work with the TinkerBoard pm me ):

    MMM-flick.py - used to read sensor data

     #!/usr/bin/env python
 
 import sys
 
 import json
 
 import time
 
 import signal
 
 import flicklib
 
 import RPi.GPIO as GPIO
 
 #import autopy
 
 
 
 GPIO.setmode(GPIO.BOARD)
 
 GPIO.setup(15, GPIO.OUT) 
 
 GPIO.setup(7, GPIO.OUT)
 
 
 
 #Turn on both LEDs for orange color in Stand By
 
 #GPIO.output(7, True) # Turn on RED LED
 
 #GPIO.output(15, True)# Turn on GREEN LED
 
 
 
 
 
 #Airwheel data
 
 
 
 some_value = 5000
 

 
 last_airwheel = 0
 
 delay = 5000
 
 
 
 
 
 #Get display size
 
 
 
 #width, height = autopy.screen.get_size()
 
 
 
 def to_node(type, message):
 
 	# convert to json and print (node helper will read from stdout)
 
 	try:
 
 		print(json.dumps({type: message}))
 
 	except Exception:
 
 		pass
 
 	# stdout has to be flushed manually to prevent delays in the node helper communication
 
 	sys.stdout.flush()
 
 
 
 to_node("status", 'Flick has started...')
 
 
 
 @flicklib.flick()
 
 def flick(start,finish):
 
   
 
 	#Slide down the newsfeed (DOWN GESTURE)
 
 	if(start == "north" and finish == "south"):
 
 		to_node("gesture", "ARTICLE_LESS_DETAILS")
 
 		GPIO.output(7, True)
 
 		time.sleep(0.5)
 
 		GPIO.output(7, False)
 
 		
 
 	#Slide up the newsfeed (UP GESTURE)
 
 	elif(start == "south" and finish == "north"):
 
 		to_node("gesture", "ARTICLE_MORE_DETAILS")
 
 		GPIO.output(15, True)
 
 		time.sleep(0.5)
 
 		GPIO.output(15, False)
 
 		
 
 	#Next page (RIGHT GESTURE)
 
 	elif(start == "west" and finish == "east"):
 
 		to_node("gesture", "PAGE_DECREMENT")
 
 		GPIO.output(7, True)
 
 		time.sleep(0.5)
 
 		GPIO.output(7, False)
 
 		
 
   
 
 	#Previous page (LEFT GESTURE)
 
 	elif(start == "east" and finish == "west"):
 
 		to_node("gesture", "PAGE_INCREMENT")
 
 		GPIO.output(15, True)
 
 		time.sleep(0.5)
 
 		GPIO.output(15, False)
 
    
 
 @flicklib.airwheel()
 
 def spinny(delta):
 
 	global some_value
 
 	global last_airwheel
 
 	global delay
 
 	some_value += delta
 
 	if some_value < 0:
 
 		some_value = 0
 
 	if some_value > 10000:
 
 		some_value = 10000
 
 	now = int(round(time.time() * 1000))
 
 	if(now - last_airwheel > delay):
 
 		#to_node()
 
 		last_airwheel = now
 
 
 
 #Mouse control via flick board
 
 
 
 #@flicklib.move()
 
 #def move(x,y,z):
 
 #	x = (x) * width
 
 #	y = (y) * height
 
 
 
 #	x = int(x)
 
 #	y = height - int (y)
 
 	
 
 #	if( y > 799 ):
 
 #		y = 799
 
 
 
 	#autopy.mouse.move(x, y)
 
 
 
 #Double tap gesture 
 
 
 
 #@flicklib.double_tap()
 
 #def doubletap(position):
 
 	#
 
 
 
 #Tap gesture
 
 
 
 @flicklib.tap()
 
 def tap(position):
 
 	if position == 'center':
 
 		GPIO.output(15, True)# Turn on GREEN LED
 
 		time.sleep(0.5)
 
 		GPIO.output(15, False)# Turn off GREEN LED
 
 
 
 #Touch gesture
 
 
 
 #@flicklib.touch()
 
 #def touch(position):
 
 	#
 
 
 
 
 
 
 
 signal.pause()

    node_helper.js

     'use strict';
 
 
 
 const NodeHelper = require('node_helper');
 
 const {PythonShell} = require('python-shell');
 
 var pythonStarted = false
 
 
 
 module.exports = NodeHelper.create({
 
   
 
 	python_start: function () {
 
 		const self = this;
 
 		const pyshell = new PythonShell('modules/' + this.name + '/MMM-flick.py', { mode: 'json', args: [JSON.stringify(this.config)]});
 
 		
 
 		pyshell.on('message', function (message) {
 
       
 
 			if (message.hasOwnProperty('status')){
 
 			console.log("node_helper_[" + self.name + "]" + message.status);
 
 			}
 
 			
 
 			if (message.hasOwnProperty('gesture')){
 
 			console.log("node_helper_[" + self.name + "] " + message.gesture);
 
 			self.sendSocketNotification("gesture_observed", message.gesture);
 
 			}
 
 		});
 
 		
 
 		 pyshell.end(function (err) {
 
 			if (err) throw err;
 
 			console.log("node_helper_[" + self.name + "] " + 'finished running...');
 
 		});
 
 	},
 
 
 
 	// Subclass socketNotificationReceived received.
 
 	socketNotificationReceived: function(notification, payload) {
 
 		if(notification === 'CONFIG') {
 
 		  this.config = payload
 
 		  if(!pythonStarted) {
 
 			pythonStarted = true;
 
 			this.python_start();
 
 		  };
 
 		};
 
 	}
 
 	
 
 });

    MMM-flick.js

    Module.register("MMM-flick",{	

		gesture_up: 0,

		gesture_right: 0,	

	// Override socket notification handler.

	socketNotificationReceived: function(notification, payload) {

		if (notification === "gesture_observed"){

			const self = this;

			self.sendNotification(payload);

			if (payload === "up"){

					MM.getModules().withClass(this.config.defaultClass).exceptWithClass(this.config.everyoneClass).enumerate(function(module) {

						module.hide(1000, function() {

							Log.log(module.name + ' is hidden.');

						});

					});

			

					MM.getModules().withClass("class_up_1_show").enumerate(function(module) {

						module.show(1000, function() {

							Log.log(module.name + ' is shown.');

						});

					});

			}

			else if (payload === "down") {

				MM.getModules().withClass("class_up_1_show").enumerate(function(module) {

						module.hide(1000, function() {

							Log.log(module.name + ' is hidden by gesture.');

						});

					});

			}

		}

	},

	

	start: function() {

		this.current_user = null;

		this.sendSocketNotification('CONFIG', this.config);

		Log.info('Starting module: ' + this.name);

	}

	

});
    1
  • R

    Nvm, I got it working perfectly! xD

    0
  • M

    Hello, is it possible to place it behind the mirror? Could you show us a picture of your integration into MagicMirror?
    Thank you in advance.

    0
  • R

    That is exactly what I’m planning to do. In theory it works behind the mirror, but you will lose the touch gestures more than likely. Unfortunately I do not have the mirror yet (it has not been delivered yet), but I’ll post a picture/results when I get it.

    So far I wrote the code this way:

    Left/right swipes go through MMM-pages & MMM-pages_indicator

    Up/down swipes open/close newsfeed details

    Each gesture also triggers the LED on the sensor board.

    I’m still thinking what other things I can do with the remaining gestures.

    I’ll update the correct code after I clean it up a bit.

    0
    M
     1 Reply
  • M

    This post is deleted!
    0
  • M

    @radu_stancu Thank you for your answer I look forward to your feedback, because I would also like to use this solution. 🙂

    0
  • S

    Could you describe, if you were successfull with the implementation of the board? Best Regards.

    0
    R
     1 Reply
  • R

    @steffenschmidt, I was successful to some extent. I have managed to use the gestures from the board to control the interface. Up, down, left and right are working and more will follow when I know what I want them to do. The only problem is that the flick sensor is NOT WORKING behind the mirror, probably because of the aluminum/silver layer that makes a mirror a mirror.

    I will work on the project in the winter holidays and post some more details.

    0
  • R

    Updated the code, and also support for the Asus Tinker Board.

    1
  • F

    This is exactly what Im looking for. Im trying to get your module to run but Im first of all not a programmer (can do simple things in python an such)

    I altered your python script to work with my skywriter board, easy enough. But i wonder how i set up the config file? Just load the module? If I do that I get a error that says "cannot find module “python-shell”

    I was hoping the sensor would work behind the mirror to but it wont. I will put it on the inside of the frame insted…

    0
    F
     1 Reply
 
Enjoying MagicMirror? Please consider a donation!