MMM-voice ugly hdmi banner

[sdetweil]

@dazza120 the example doesn’t have ;

on_event_start /home/{userid}/MagicMirror/modules/MMM-SleepWake/external_motion started

[dazza120]

@sdetweil no it this is what its like i hope this is correct?

# Command to be executed when an event starts. (default: none)
# An event starts at first motion detected after a period of no motion defined $
; on_event_start /home/pi/MagicMirror/modules/MMM-SleepWake/external_motion sta$

# Command to be executed when an event ends after a period of no motion
# (default: none). The period of no motion is defined by option event_gap.
; on_event_end value /home/pi/MagicMirror/modules/MMM-SleepWake/external_motion$

[sdetweil]

ok, that ; is a comment in the motion conf file, just like #… have to remove it

note that the on event end has an extra token there that neds to be removed
on_event_end value

[dazza120]

@sdetweil yes it is do i have to remove the # aswell?

[sdetweil]

@dazza120 no, there is no # on those two lines

[dazza120]

@sdetweil no on the two lines above it

[sdetweil]

@dazza120 no, those are comments to explain what these lines do

[dazza120]

@sdetweil ok cool so this is how i have it now

# Command to be executed when an event starts. (default: none)
# An event starts at first motion detected after a period of no motion defined by event_gap
 on_event_start /home/pi/MagicMirror/modules/MMM-SleepWake/external_motion started

# Command to be executed when an event ends after a period of no motion
# (default: none). The period of no motion is defined by option event_gap.
 on_event_end /home/pi/MagicMirror/modules/MMM-SleepWake/external_motion ended

[sdetweil]

@dazza120 looks good

[dazza120]

@sdetweil thanks ive done this command chmod +x external_motion but i don’t see an outcome it just re turns to pi@raspberrypi:~/MagicMirror/modules/MMM-SleepWake

whole commandline below

pi@raspberrypi:~/MagicMirror/modules/MMM-SleepWake $ chmod +x external_motion