Magic mirror is complete and hanging!!! Ran
electric wires to plug in behind the mirror to conceal them. Then I integrated the motion sensor into the gang box so you really don’t see it!! Overall I love it
photo

So here’s a break down I used a 19" insignia tv monitor
The mirror is a two way smart mirror from http://www.twowaymirrors.com/smart-mirror/

The receptacle I used was a combo USB outlet. Is runs 5v 3.6a and powers the tv

From
http://m.homedepot.com/p/Leviton-15-Amp-Decora-Tamper-Resistant-Combination-Receptacle-and-USB-Charger-White-R02-T5631-00W/205730876?MERCH=REC--mobileweb_pip_rr-4--205092277--205730876--N

Raspberry pi3 to run magic mirror

Pir sensor from adafruit
https://www.adafruit.com/product/189

I used a three gang outlet box and since I only needed two spaces it allowed me to use a blank insert to mount the pir sensor in.

As for the leviton USB outlet I spliced into an outlet I had already installed I spliced into it to run the wires to a gang box behind the mirror. Leaving a seamless look.

I made the frame from poplar wood and stained it in ebony color

As for modules
I am using Wunderground
Random quotes
Flikr
Compliments
Date time

I kept it simply because i am really new at this but overall I love it

Sorry I don’t have more pics I didn’t even think about taking any during the process

@johnnyboy it was rather simply. I used https://github.com/paviro/MMM-PIR-Sensor

To run it just remember to use bcm numbering instead of gpio numbering

I did extend the wires and I used a ferrite bead to ensure there would be no interference…

Since me tv doesn’t have a true power saving I used
https://github.com/phrazelle/mm-pir-hide-all

To create the illusion it shuts off basically turns the screen black until the pir senses motion

@johnnyboy works as expected it is sensitive but there are adjustments on the back of the unit I have my sentivity just a smidge past minimum

@strawberry-3.141 so just make a copy of the config file. Run your command, then git pull && npm install. The transfer over my saved config??

@Richard238 following have the same issues

@strawberry-3.141 said in v2.1.1 Update Error:

@lucallmon this is because you changed those mentioned files manually. If you want to revert your changes permamently do git checkout modules/default/clock/clock.js modules/default/compliments/compliments.js and rerun your command

I got this for compliments as well if info what you mentioned will it keep everything the same?? I had a heck of a time getting it to work I don’t want to loose anything

@Timeeee I used a 18x14 glass it’s a the 19 in monitor is about 17.5 inches long so it’s a nice clean yet tight fit

@johnnyboy works as expected it is sensitive but there are adjustments on the back of the unit I have my sentivity just a smidge past minimum

@johnnyboy it was rather simply. I used https://github.com/paviro/MMM-PIR-Sensor

To run it just remember to use bcm numbering instead of gpio numbering

I did extend the wires and I used a ferrite bead to ensure there would be no interference…

Since me tv doesn’t have a true power saving I used
https://github.com/phrazelle/mm-pir-hide-all

To create the illusion it shuts off basically turns the screen black until the pir senses motion

@Mykle1 this is what I got it is glass and 1/4 in (6mm)

http://www.twowaymirrors.com/product/14x18-smart-mirror-sanded-edges/

So here’s a break down I used a 19" insignia tv monitor
The mirror is a two way smart mirror from http://www.twowaymirrors.com/smart-mirror/

The receptacle I used was a combo USB outlet. Is runs 5v 3.6a and powers the tv

From
http://m.homedepot.com/p/Leviton-15-Amp-Decora-Tamper-Resistant-Combination-Receptacle-and-USB-Charger-White-R02-T5631-00W/205730876?MERCH=REC--mobileweb_pip_rr-4--205092277--205730876--N

Raspberry pi3 to run magic mirror

Pir sensor from adafruit
https://www.adafruit.com/product/189

I used a three gang outlet box and since I only needed two spaces it allowed me to use a blank insert to mount the pir sensor in.

As for the leviton USB outlet I spliced into an outlet I had already installed I spliced into it to run the wires to a gang box behind the mirror. Leaving a seamless look.

I made the frame from poplar wood and stained it in ebony color

As for modules
I am using Wunderground
Random quotes
Flikr
Compliments
Date time

I kept it simply because i am really new at this but overall I love it

Sorry I don’t have more pics I didn’t even think about taking any during the process

Magic mirror is complete and hanging!!! Ran
electric wires to plug in behind the mirror to conceal them. Then I integrated the motion sensor into the gang box so you really don’t see it!! Overall I love it
photo

thank you i want sure if a general sudo apt-get update or sudo apt-get dist-upgrade
would work… thanks again I hope to one day be able to help others !!!