Finally got it working and built.

Here’s a video of it working: https://goo.gl/photos/KZNFsERx2zUJ58GTA

I started out with an old HEAVY 30" monitor that I bought from a friend with 1080p HDMI support.

Then of course I installed all of the required MagicMirror software on my RPi 3 model B with Canakit case. I added a 5v GPIO fan because I knew it was going to generate heat behind the mirror and the monitor puts off a TON of heat. I drilled holes on the top of the case to allow more air flow and screwed it into the top. I also attached two squid buttons: both with python scripts to run reboot command and shutdown commands:

I built the frame from 2x4 birchwood with 1x3 45deg angled cuts for the border and 1x4 for the back to allow for hanging (no plan to hang as of right now). I used pre-drilled holes and Gorilla wood glue to hold in place. I also used wood putty to fill in the holes and gaps created by imperfect cuts of wood that I picked up at Lowes. Then I sanded the beJesus out of it with both a belt sander and by hand. I also drilled several venting holes for the heat to escape. Then I put about 2-too-many coats of wood stain on it. It was below freezing in my garage when it was drying so it cracked after I put the acrylic top-coat on it. I think it looks pretty cool like that anyway. It looks kind of like snake scales.

The glass I used was the 1/8" acrylic from Tap Plastics. I’ll be honest, I’m not that pleased with it. Since it’s acrylic, in certain places it looks like a fun house mirror, distorting the image–perhaps it’s not completely flat, but it works well enough. To cut ~30" piece was $67 + 16 for S&H. I wasn’t willing to spend $150+ for the glass at twowaymirrors.com. Also there are a few small imperfections with the glass where the mirror coating had chipped off when I got it. It’s hard to see unless you’re up close, so I can deal with it.

Here is the setup behind the mirror:

Everything fits very snugly into the frame.

1. stereo speakers built into the monitor that supplies HDMI audio
2. Oontz angle BT speaker with better bass response for music. Currently plugged into the RPi via 3.5mm jack.
3. The RPi with attached fan, x2 squid buttons, micro-USB microphone, and mini wireless USB keyboard
4. pre-drilled holes for the squid buttons
5. simple 3-port extension cord for power supply to speaker, monitor and RPi. I’d like to figure out something better in the future.
6. monitor buttons and LED (puts off a cool blue light behind the mirror).

Here’s my button and mic setup. The top squid is for restart and the bottom for shutdown. I took my Kinobo mic, attached it to a USB extender and glued it to the back of the frame.

And that’s pretty much it! The software has been the biggest hurdle. I’ve had the hardest time getting the AlexaPi skill to stay working correctly. It was working amazingly the first time I installed it but every subsequent install it has gotten worse and I can’t figure out why. I’ve been in contact with the devs over at gitter.im but it still works well enough.

Here’s my module setup:
Top Left

• Time in 12h format with date
• CPU temp
• multiple calendar events
• gmail

Top Right

• Wunderground with forcast
• phone notifications
• car and train travel times in DC area

Bottom Bar

• AlexaPi integration
• Compliments
• RSS news feed

I have other modules not showing - MMM-ModuleScheduler, MMM-RemoteControl and MMM-Instagram turned off.

Here’s the final product:

I hope you enjoy.

@cowboysdude thanks for the help. This is actually what worked for me:

 body {
	cursor: help
 }
 
 .region.top.left {
	width: 375px
}

Every single person here has a different setup for their Mirror with modules in different places for different reasons. Show yours and tell us why you have what you have!

Here’s what I have currently: CLICK HERE TO SEE MY MIRROR SETUP
Top Left

• Time in 12h format with date
• CPU temp
• multiple calendar events
• gmail

Top Right

• Wunderground with forcast
• phone notifications
• car and train travel times in DC area

Bottom Bar

• AlexaPi integration
• Compliments
• RSS news feed

@cowboysdude upstate NY also here. just outside Watertown.

Could you please write a more detailed Readme file on how to install and how to make adjustments to MMM-Remote-Control? I’d like to do this for a display in my kitchen as well but I’m a NOOB and some of the stuff you mention just doesn’t make sense to me. Thanks.

Is there a way to change the size of a module? I’m looking at trying to shrink the size of the calendar module–make it more narrow. I would like it to be the size of the weather update. Thanks.

What mirror did you use? I mean, where did you get the mirror?

@joanaz I really want to get excited about this but the install info is confusing at best. Could you please post a video demo of how it’s working currently and a more step-by-step installation guide? This sound like exactly what I’m looking for, but… I just don’t need more info.

@Wedee can you post your custom.css file?

@cowboysdude I have the frame built but I have to shave it down a bit to fit the monitor. It’s a 30in old piece of crap, but it works.

I have been using MM since… uh… at least 2016 building and rebuilding many times. However, at some point this week, I noticed all of my modules that use Google info (mail, calendar, and MMM-MyCommute) have all disappeared from my MM.

This is what I get from the logs.

Any idea what’s causing this or what I can do to fix it?

It looks like all of the google apps and APIs are not working. My gmail, mycommute, and calendar are all not working.

Re: MMM-History

Anyone know how to change the date from 31/10/2024 to Oct. 31, 2024?

These elves are about to be shelved for messing with my mirror! I don’t know how to fix it! Look how upset they made my kid! I think I’m going to have to tie them down to a chair and torture them to unlock my mirror back to its normal state.

Any suggestions?

@bendardenne yeah, that didn’t work at all. It’ just blank. nothing shows up on my mirror.

@j-e-f-f is there a way you can change how often it updates the scores? what is the default set to? I’d like to change it to every 15 minutes. Thanks and standing by.

@ronny3050 any thoughts?

Mine stopped working months ago with the latest MM update. Not sure how to resolve it also.

@j.e.f.f I’m loving the module. Do you think there’s any way to group NCAAF teams into conferences? I primarily focus on SEC teams and would like to see them all grouped together separate from my other favorite teams/sports. Or perhaps have the AP Top 25 ranked teams in their own group?

Thoughts?

@cowboysdude Just installed this for the first time. Looks GREAT! However, it seems to take up a lot of space at the bottom bar; I am using a somewhat smaller screen. Is there a way I can limit the module to more of the center leaving space on both sides at the bottom for smaller modules? Also, I’d like to center the pic and text. It seems that it only aligns to the left. Any help would be greatly appreciated.