Hello All
If I use pm2 stop mm will this command stop the npm server also?
Or what is pm2 to npm?

Thanks

bhepler thank you so much for replying and for the pointers!

I tried your suggestion but no help it did the same thing.
Just lockup until I use ctrl+Alt+T to get a terminal window and reboot.

So I’m confused why when I execute the commands the display does not show MagicMirror?
These are the same commands in the pm2 scrip file.
Also this is the way the wiki said to start the Mirror.
And again at the end of the installation it states to use

DISPLAY=:0 npm start

in the MagicMirror directory.
It like the display does not update and show the Mirror?

But if i boot the Pi the Mirror will start just fine.
Also if i use pm2 start and stop it works just fine.
I’m trying to manual start the Mirror so i can start in debug mode and or server only mode.

Thank you for any help

I have been working this for two days now.
This is the 3rd fresh install /SD card and not having any luck.
So I have installed MagicMirror 2 on Pi 3B on Stretch 2018-06-27.
And MagicMirror works in a way.
So I used pm2 and set it all up.
On boot pm2 will start the mirror and I can stop and restart the mirror no problems.
But if I do

cd MagicMirror
DISPLAY=:0 npm start

It just give me the screen shot below and locks up the Pi.
But the mirror server is running and I can see the mirror using a computer on the the network and this is with the Pi locked up and only displaying what in photo.

And help?

Hello All
Looking for some help I have an issue with Pages that I have been fighting for three days now.
First I’m new to MagicMirror.
I have dad some experience with Raspberry Pi before but not to much.
Running a Raspberry Pi 2 B
MagicMirror 2.4.1

The issue is Pages is putting ever thing on the first page and neve switching.
If I get Pages to work like I have it in the config file it will only stay that way for that session.
I still developing the system so I’m shutting down the Pi at night.
If I have it working and shut down the system and restart Pages will work.
But if I shut down the system for overnight then the next day it will be confused again
And all the modules are on the first page again.

I have looked at the log file and don’t see anything out of place that I know of.
Here is my config.js file.

Any help would be outstanding and thank you.

var config = {
	address: "0.0.0.0", // Address to listen on, can be:
	                      // - "localhost", "127.0.0.1", "::1" to listen on loopback interface
	                      // - another specific IPv4/6 to listen on a specific interface
	                      // - "", "0.0.0.0", "::" to listen on any interface
	                      // Default, when address config is left out, is "localhost"
	port: 8080,
	ipWhitelist: [], // Set [] to allow all IP addresses was "127.0.0.1", "::ffff:127.0.0.1", "::1","::ffff:10.19.57.64/26"
	                                                       // or add a specific IPv4 of 192.168.1.5 :
	                                                       // ["127.0.0.1", "::ffff:127.0.0.1", "::1", "::ffff:192.168.1.5"],
	                                                       // or IPv4 range of 192.168.3.0 --> 192.168.3.15 use CIDR format :
	                                                       // ["127.0.0.1", "::ffff:127.0.0.1", "::1", "::ffff:192.168.3.0/28"],

	language: "en",
	timeFormat: 12,
	units: "imperial",

	modules: [
		{
			module: "alert",
		},
		{
			module: "updatenotification",
			position: "top_bar"
		},
		{
		        module: 'MMM-pages',
	        	config: {
	                modules:
	                    [["calendar","weatherforecast","newsfeed"],
	                     ["MMM-NOAA","MMM-PushBulletNotifications","MMM-SystemStats","mmm-systemtemperature","MMM-NetworkConnection"],
				["calendar"]],
	               	excludes: ["clock","currentweather","compliments","MMM-page-indicator"],
			animationTime: 8000,
			rotationTime: 20000			
	        	}
    		},
		{
			module: "clock",
			position: "top_left"
		},
		{
			module: 'MMM-SystemStats',
			position: 'top_left', // This can be any of the regions.
			classes: 'small dimmed', // Add your own styling. Optional.
			config: {
				updateInterval: 10000,
				animationSpeed: 0,
				align: 'right', // align labels
				//header: 'System Stats', // This is optional
			}
		},
		{
			module: 'mmm-systemtemperature',
			position: 'top_left',	// This can be any of the regions.
			classes: 'small dimmed', // Add your own styling. Optional.
			config: {
				// See 'Configuration options' for more information.
			}
		},

		{
			module: "calendar",
			header: "US Holidays",
			position: "top_left",
			config: {
				calendars: [
					{
						symbol: "calendar-check-o ",
						url: "webcal://www.calendarlabs.com/templates/ical/US-Holidays.ics"
					}
				]
			}
		},
		{
			module: 'MMM-PushBulletNotifications',
			header: 'Notifications',
			position: 'top_left',	// This can be any of the regions.		
			config: {
				// See 'Configuration options' for more information.
				accessToken: "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx", //PushBullet API Access Token
				numberOfNotifications: 3,
				filterTargetDeviceName: "",
				showPushesSentToAllDevices: true,
				onlyAllowCommandsFromSourceDevices: [],
				fetchLimitPushBullet: 50,
				showPushes: true,
				showPushesOnLoad: true,
				showDismissedPushes: true,
				showMirroredNotifications: true, 
				showSMS: true,
				showMessage: true,
				showIcons: true,
				showDateTime: true,
				localesDateTime: 'nl-NL',
				playSoundOnNotificationReceived: true,
				soundFile: 'modules/MMM-PushBulletNotifications/sounds/new-message.mp3',			
				maxMsgCharacters: 70,
				maxHeaderCharacters: 22,
				showModuleIfNoNotifications: true,
				noNotificationsMessage: "No new notifications",
				debugMode: false,
			}
		},
		{
			module: "currentweather",
			position: "top_right",
			config: {
				location: "Newport,US",
				locationID: "4143871",  //ID from http://www.openweathermap.org/help/city_list.txt
				appid: "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx",
				showHumidity: true
			}
		},

		{
			module: "weatherforecast",
			position: "top_right",
			header: "Weather Forecast",
			config: {
				location: "",
				locationID: "4141363",  //ID from http://www.openweathermap.org/help/city_list.txt
				appid: "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx",
				showRainAmount: true,
				colored: true
			}
		},
		{
    			module: 'MMM-NOAA',
			position: "top_right",
    			config: {

				apiKey: "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx",    // https://www.wunderground.com/weather/api  select the middle plan... 
				airKey: "xxxxxxxxxxxxxxxx"    // IF you want Air Quality Index
			}
		},
		{
			module: "compliments",
			position: "lower_third"
		},
		{
			module: "newsfeed",
			position: "bottom_bar",
			config: {
				feeds: [
					{
						title: "Fox News",
						url: "http://feeds.foxnews.com/foxnews/latest",
					},
				],
				showSourceTitle: true,
				showPublishDate: true,
			}
		},
		{
		    	module: 'MMM-NetworkConnection',
    			position: 'bottom_bar',
    			config: {
    				}
		},
		{
		        module: 'MMM-page-indicator',
		        position: 'bottom_bar',
		        config: {
		            pages: 3,
		        }
    		},
		
	]

};

/*************** DO NOT EDIT THE LINE BELOW ***************/
if (typeof module !== "undefined") {module.exports = config;}

Re: PushBulletNotes - Phone Notifications on your mirror
Thank You malicious_banjo for your work on this!

I have installed PushBulletNotes module without issues.
I config it correctly I think it shows up on the mirror in the lower left.
But I just don’t get any Notifications.
I have PushBullet on my phone for some time I use it with a number of other devices I have made.
I login to PB and got an access token for this without issue and put it in the config.
If I send from my computer my phone gets the notification but nothing on the mirror.
Don’t know where to look now.
Does anyone have any ideas?
GeckospotNixie