@ivanov_d Don´t hesitate. Keep the mirror in one peace if it getting critical for you.
Read the statement by Michael Teeuw here.
Posts made by InternetPolice
-
RE: New 2-way mirror supplier - low prices and lead times
-
RE: New 2-way mirror supplier - low prices and lead times
@ivanov_d No worrys. I want to see if the reflection is better.
-
Touch Sensor which doesn´t work through the mirror
Open that topic to let other know which sensor doesn´t work behind the mirror.
I have tested this one, because its says mirror sensor, guess what it didn´t:
https://de.aliexpress.com/item/1005001669692924.html?spm=a2g0s.9042311.0.0.3e7f4c4dlPDnLcPlease share your expierence
-
RE: New 2-way mirror supplier - low prices and lead times
You have a picture from daylight? AS well a comparission to Chriz mirror would be good at daylight.
-
RE: *NEW LIST 29.06.2021* Two way community order for mirror glass for all european countries - Open until at least 10 people have entered
@goldjunge_chriz No, could figure out which site is the back. Still dark and not even close to your picture. Or did you made the expierence, that the manufacturer send different reflection form charge to charge?
-
RE: *NEW LIST 29.06.2021* Two way community order for mirror glass for all european countries - Open until at least 10 people have entered
Hey @Goldjunge_Chriz . Why is your advertised mirror so reflective? I put for a test everything together, but it is very dark. How can I improve it?
-
RE: Borderless bathroom mirror
Thanks for the link to your topic @Ivanov_d . What foil did you use (link amazon) and what glue?
Now I am concerned about the dark mirror, because I ordered a huge one from Chris. It was planned as Bathroom mirror, based on a clear picture of him and a youtube video where somebody set up his own AI.
-
How to attach the support frame to the mirror and film
I am currently planning my mirror with two screens. Actually I am thinking about the reusability of the mirror in case the screen get broken and I need to replace them or other changes like adding light.
General Idea is to attached a black window film and glue the support frame to the film. So if I need to change the layout of the equippment, I can remove the film and adjust everything. My mirro shall be frame less, so hook or any otherkind of attaching is not possible.
In one of the Hardware forum somebody has tried it, but I can not find it again what the result was. May someone can help me out. -
RE: *NEW LIST 29.06.2021* Two way community order for mirror glass for all european countries - Open until at least 10 people have entered
Got mine as well. Good box. After unpacking I saw the wood plate broken underneath the tape. Was not visible during hand over. Scared me. But everything is good.
@Goldjunge_Chriz I expected a foil. How do I figure out which site is the correct one?