@megamarko112 said in LCD Controller for old TV Display:

CFP190W01-A00

You can use any universal LCD controller board that supports 30 pin LVDS 2 channel, 8 bit. (FIX-30P-DO8L). Make sure you get the right LVDS cable with it. You can use the black GND wires for fingerprinting to make sure they fit your screen.

You’ll also need an inverter with 4 ports for the CCFL backlight.

The cheapest set should be around 3€, more advanced (TV controller)boards with HDMI you get for around 10€. Boards with a firmware dedicated to you screen cost around 30€.

This is a really good site to start collecting information about LCDs.