@nuckinfutz Excellent point, I’m not having power issues so I will probable just leave it how it is. Thanks for the input.
Latest posts made by n8ms
RE: Problems with Wi-Fi connectivity.
@nuckinfutz Will this disable both wlan1 and wlan0, wlan0 being the native wireless adapter? I currently have both active and the dongle is working great. I would trial and error it but I am trying to avoid disabling wireless and losing my SSH connection. Will have to open it all up and connect a keyboard to get it running again.
Problems with Wi-Fi connectivity.
I’ve been able to get my MM up and running when all the parts and pieces are outside the wooden frame I built. When I assemble it all into the frame I lose my wi-fi connection. Its seems that either the housing is shielding the unit or there is radio interference from the monitor.
I have a Raspberry Pi 3 with on-board wi-fi. I poked around the internet and found some info on modding the board to add a bigger antenna but I would prefer not to mod the board. Has anyone had experience with disabling the on-board wi-fi and adding a wi-fi dongle? Has anyone had similar trouble and solved it some other way? Any help would be appreciated.
RE: Black screen + access Denied trough web
I am getting the same issue with the black screen. When I access via localhost:8080, I get the default screen that tells you to create a config file. I was using a config.js file from an old build I did that worked, but I replaced it with the config file posted above and I get the same issue.
pi@n8MM:~/MagicMirror $ npm start > firstname.lastname@example.org start /home/pi/MagicMirror > sh run-start.sh Starting MagicMirror: v2.1.1 Loading config ... Loading module helpers ... No helper found for module: clock. No helper found for module: compliments. All module helpers loaded. Starting server on port 8080 ... Starting server op port 8080 ... You're using a full whitelist configuration to allow for all IPs Server started ... Sockets connected & modules started ... Launching application. ^C pi@n8MM:~/MagicMirror $ node -v v7.9.0 pi@n8MM:~/MagicMirror $ electron -v v1.3.15 pi@n8MM:~/MagicMirror $