Hi all,
just assembled my mirror, I used the "Smart Mirror" (http://www.twowaymirrors.com/s...). I know trhese mierrors work in a well lit room the best but I was wondering if there is any tweaking that helps keep the bleed coming through? Is turning brightness all the way down best etc?
Thanks
Hi all,
posted in the NHL mod topic but need some help. I went and updated the NHL module and started getting issues so i deleted it and started fresh, but am still getting the issues. See below photo…
please help…I have just under a week till my brother birthday and this is my big surprise for him… If you need any more pictures of anything let me know
…I am having a bit of a problem…would you mind helping me…I knew I should have left this alone… I did what you said, but I am getting the following when I run magicmirror
please help…I have just under a week till my brother’s birthday and this is my big surprise for him… If you need any more pictures of anything to diagnose let me know
Hi all,
i installed the original version of the NHL module and it works great, i see there have been updates…Can anyone tell me how to install those updates now?
Sorry I am a noobie who made this mirror for my brother, it’s almost time to give it to him so I want him to have the most up to date modules…
@bhepler I dont think i set that up when i installed everything because I didnt think I would ever use that…
Ok gents a bit of a ramble here.
The other night I finished everything I wanted module wise so i was going to start on hardware (i.e taking monitor out of frame etc) After I took the monitor out of the frame and plugged it in to my Pi I noticed the screen was saying ‘no signal.’ I started to panic as the control for the monitor popped out of the socket so I was worried I just pissed a $150 monitor down the drain. I decide to try my PC monitor and lo and behold I get the same thing… I plug in my future MagicMirror Monitor to my PC and guess what… It works like a charm.
This obviously means something else is wrong…I am literally not at all a computer guy. I took my SD card out and plugged into my computer and I see all the files so that means that is not corrupted/dead right? So it must be the R Pi3 itself? The Pi lights up when I put power to it and everyhting…I tried using both the DVI and HDMI port on the R Pi3
Help would be greatly appreciated.
Hi All,
I am looking for of course what I have been told is the best type of mirror for this project:
http://www.twowaymirrors.com/smart-mirror/
Anyone know where to get this in Toronto or Canada in general? The shipping alone from Toledo is insane, otherwise I would do it.
If not does anyone who made a mirror have a place that does good quality similar type mirror to the one above? Looking for real glass here.
Hi guy thanks for the response… I feel like a dummy!