Black Screen after installing fonts-noto-color-emoji

[aunrea]

@sdetweil I think when I tried to install mmpm that it didn’t install correctly. I did it again and everything seems fine except I still have a black screen. But somehow in the web using the ip address it loads fine. Why would I get a black screen on the pi but everything working on the web? I even made a change to make sure it wasn’t cached and the change showed up so it’s new.

[aunrea]

I have been getting the following error mm-error.log:

[12.08.2022 22:50.16.819] [WARN]  You're using a full whitelist configuration to allow for all IPs
[1707:0812/225020.891765:ERROR:viz_main_impl.cc(186)] Exiting GPU process due to errors during initialization
[1749:0812/225021.867756:ERROR:viz_main_impl.cc(186)] Exiting GPU process due to errors during initialization
[1768:0812/225022.360451:ERROR:gpu_memory_buffer_support_x11.cc(44)] dri3 extension not supported.
/home/pi/MagicMirror/node_modules/electron/dist/electron exited with signal SIGINT
[12.08.2022 23:24.59.722] [WARN]  You're using a full whitelist configuration to allow for all IPs
[1686:0812/232504.792579:ERROR:viz_main_impl.cc(186)] Exiting GPU process due to errors during initialization
[1735:0812/232505.286195:ERROR:gpu_memory_buffer_support_x11.cc(44)] dri3 extension not supported.
[12.08.2022 23:46.19.653] [WARN]  You're using a full whitelist configuration to allow for all IPs
[1623:0812/234649.995261:ERROR:viz_main_impl.cc(186)] Exiting GPU process due to errors during initialization
[1766:0812/234650.598873:ERROR:gpu_memory_buffer_support_x11.cc(44)] dri3 extension not supported.

[sdetweil]

@aunrea are you running the 64 bit raspi os?

this is a configuration problem when using the Vulcan video driver.

[aunrea]

@sdetweil I am running the 32 bit raspi os. I used the official raspberry pi imager to create it.

[aunrea]

I think it’s a GPU issue. Could it have been a bad install of the os? Should I reinstall?

[sdetweil]

@aunrea I do not know

[aunrea]

Ok I am going to try a new install on my raspberry pi 4, instead of the 3B I have been using.

[arosenhave]

@aunrea any luck resolving this issue?
I have a fresh install of MM on an RPI4 (Rasbian OS 32bit) and get the same problem when installing MMM-Face-Reco-DNN. Only errors I have in the logs are the same GPU related ones.

And the strange thing is that I have the exact same setup on a different SD card done 6 weeks ago. And that works perfectly. It reporst my MM is outdated, but I don’t dare updating it now.

[sdetweil]

@arosenhave depends on which video driver is enabled in /boot/config.txt

edit the script which starts MM
and add

export ELECTRON_DISABLE_GPU=1

before the
npm start
line

[sdetweil]

@arosenhave if u want to upgrade, use my script
see
https://github.com/sdetweil/MagicMirror_scripts

and backup

see https://github.com/sdetweil/MagicMirror-backup-restore

[arosenhave]

@sdetweil This made no difference, I’m afraid :(

The strange thing is that for a split second I can see the other modules loading and displaying and then it all goes black. Like the MMM-Face-Reco-DNN somehow loads in front of everything. If I remove this module from config.js everything displays fine. I have checked the config.js for syntax errors and it reports nothing.

[sdetweil]

@arosenhave yes, reco hides everything til u identify thru the camera yourself

then it shows the modules marked as visible for your profile/module classes config

[sdetweil]

@arosenhave I would need to see the output of the npm start.

black screen is usually a module crash or missing dependencies

[arosenhave]

@sdetweil I am so sorry. I don’t know how I missed this from one installation to another but feel truly ashamed. What happened is that I used a copy of config.js that I thought was the one working from previous install. But it was missing the classes clause to show the modules.

Again, so sorry and super grateful for putting me on the right track :)

[sdetweil]

@arosenhave glad u found it!