MMM-GroveGestures / Python script is terminated

MagicStarthilfe · Feb 8, 2020, 9:19 PM

Hello everybody,
I’ve recently had a problem with the MMM-GroveGestures module. Besides, a great module!
I get the following messages in /MagicMirror-error.log.

0|MagicMirror  | [21:22:51.860] [LOG]
0|MagicMirror  | Keyboard Interrupted
0|MagicMirror  | [21:22:51.862] [LOG]    [GESTURE] Gesture script is finished.
0|MagicMirror  | [21:22:52.366] [LOG]
0|MagicMirror  | [GESTURE] Python script is terminated. It will restart soon.

A restart does not help.
I use a Raspberry Pi 3 Model B Rev 1.2

PRETTY_NAME="Raspbian GNU/Linux 9 (stretch)"
NAME="Raspbian GNU/Linux"
VERSION_ID="9"
VERSION="9 (stretch)"
VERSION_CODENAME=stretch
ID=raspbian
ID_LIKE=debian
HOME_URL="http://www.raspbian.org/"
SUPPORT_URL="http://www.raspbian.org/RaspbianForums"
BUG_REPORT_URL="http://www.raspbian.org/RaspbianBugs"

I use the following modules:
MMM-DWD weather warning; MMM NOAA; MMM-pages; MMM Remote Control; MMM buttons; MMM Grove Gestures; MMM notification trigger; MMM-PIR sensor; MMM-NASA; MMM-page-indicator; MMM-Public Transport Hafas

I would be very thankful for help.
Carsten

A Former User · Feb 8, 2020, 9:48 PM

@MagicStarthilfe
how often did it happen? always? randomly?
When did it happen usually? soon after start? in some minutes or hours?

A Former User · Feb 8, 2020, 9:59 PM

too fast or too slow i2c speed could make this kind issue.
try to adjust speed to 10000 - 32000 (default might be 100000 I remembered)

https://www.raspberrypi-spy.co.uk/2018/02/change-raspberry-pi-i2c-bus-speed/

MagicStarthilfe · Feb 9, 2020, 10:34 AM

This post is deleted!

MagicStarthilfe · Feb 9, 2020, 10:57 AM

@Sean
Thanks for the quick answer.
Last night it started correctly for once. That was after several restarts, no idea why it suddenly worked. Then I let the system run overnight, that was no problem.
I rebooted it earlier for a test. The error did not occur then, but the module does not react now. Therefore all modules are on the first page (use MMM-GroveGestures for the page change together with MMM-pages, MMM-page-indicator and MMM notification trigger which worked otherwise). Even a restart does not help at the moment. I have increased the speed of i2c.
python gesture_print.py works.
All modules seem to be loaded correctly. (see MagicMirror-out.log
below)
Is it maybe more a problem of MMM-pages?
Today I will test the system without MMM-pages and only with the clock, if MMM-GroveGestures works I will start the other modules bit by bit. Maybe I can identify a module that causes problems.

[11:32:16.198] [LOG]    Starting MagicMirror: v2.10.1
[11:32:16.215] [LOG]    Loading config ...
[11:32:16.234] [LOG]    Loading module helpers ...
[11:32:16.236] [LOG]    No helper found for module: alert.
[11:32:16.371] [LOG]    Initializing new module helper ...
[11:32:16.372] [LOG]    Module helper loaded: updatenotification
[11:32:16.374] [LOG]    No helper found for module: clock.
[11:32:16.544] [LOG]    Initializing new module helper ...
[11:32:16.545] [LOG]    Module helper loaded: MMM-Remote-Control
[11:32:16.561] [LOG]    Initializing new module helper ...
[11:32:16.562] [LOG]    Module helper loaded: MMM-GroveGestures
[11:32:16.570] [LOG]    Initializing new module helper ...
[11:32:16.571] [LOG]    Module helper loaded: MMM-NotificationTrigger
[11:32:16.572] [LOG]    No helper found for module: MMM-page-indicator.
[11:32:16.574] [LOG]    No helper found for module: MMM-pages.
[11:32:16.648] [LOG]    Initializing new module helper ...
[11:32:16.649] [LOG]    Module helper loaded: MMM-PIR-Sensor
[11:32:17.647] [LOG]    Initializing new module helper ...
[11:32:17.648] [LOG]    Module helper loaded: MMM-SystemStats
[11:32:18.339] [LOG]    Initializing new module helper ...
[11:32:18.339] [LOG]    Module helper loaded: MMM-PublicTransportHafas
[11:32:18.345] [LOG]    Initializing new module helper ...
[11:32:18.346] [LOG]    Module helper loaded: MMM-NASA
[11:32:18.575] [LOG]    Initializing new module helper ...
[11:32:18.576] [LOG]    Module helper loaded: MMM-NOAA
[11:32:19.573] [LOG]    Initializing new module helper ...
[11:32:19.576] [LOG]    Module helper loaded: MMM-DWD-WarnWeather
[11:32:19.664] [LOG]    Initializing new module helper ...
[11:32:19.664] [LOG]    Module helper loaded: newsfeed
[11:32:19.665] [LOG]    All module helpers loaded.
[11:32:19.667] [LOG]    Starting server on port 8080 ...
[11:32:19.691] [LOG]    Server started ...
[11:32:19.693] [LOG]    Connecting socket for: updatenotification
[11:32:19.695] [LOG]    Connecting socket for: MMM-Remote-Control
[11:32:19.697] [LOG]    Starting node helper for: MMM-Remote-Control
[11:32:19.714] [LOG]    Connecting socket for: MMM-GroveGestures
[11:32:19.716] [LOG]    Connecting socket for: MMM-NotificationTrigger
[11:32:19.763] [LOG]    Connecting socket for: MMM-PIR-Sensor
[11:32:19.766] [LOG]    Connecting socket for: MMM-SystemStats
[11:32:19.768] [LOG]    Connecting socket for: MMM-PublicTransportHafas
[11:32:19.770] [LOG]    Connecting socket for: MMM-NASA
[11:32:19.772] [LOG]    Starting node_helper for: MMM-NASA
[11:32:19.774] [LOG]    Connecting socket for: MMM-NOAA
[11:32:19.776] [LOG]    Starting module: MMM-NOAA
[11:32:19.801] [LOG]    Connecting socket for: MMM-DWD-WarnWeather
[11:32:19.802] [LOG]    MMM-DWD-WarnWeather helper started...
[11:32:19.803] [LOG]    Connecting socket for: newsfeed
[11:32:19.805] [LOG]    Starting module: newsfeed
[11:32:19.805] [LOG]    Sockets connected & modules started ...
[11:32:20.114] [LOG]    Launching application.
[11:32:25.625] [LOG]    Transportation fetcher for station with id '008000263' created.
[11:32:26.201] [LOG]    Transportation fetcher for station with id '000625258' created.
[11:32:26.356] [LOG]    Create new news fetcher for url: http://www.tagesschau.de/xml/rss2 - Interval: 300000

A Former User · Feb 9, 2020, 11:01 AM

@MagicStarthilfe
I don’t know whether MMM-Pages would be reason or not at this moment. Your last log seems so quite normal anyway (or saying nothing important really. :D)
If you are using MMM-Pages, keep this kind of module is valid on each page. I think it’s better to keep it globally out of those kinds of suspending/resuming control.

MagicStarthilfe · Sep 5, 2023, 8:48 AM

@Sean Hello,
the error " Python script is terminated" I could actually fix by adjusting the i2c speed. Thanks for the tip.
The subsequent errors were caused by the NOAA module.
Thanks for the help.

Egnos · Sep 5, 2023, 8:48 AM

Hi @MagicStarthilfe I have the same problem as you:

[04.09.2023 12:50.18.499] [LOG]   [GESTURE] Gesture script is finished.
[04.09.2023 12:50.19.072] [LOG]   [GESTURE] Python script is terminated. It will restart soon.
[04.09.2023 12:50.19.270] [LOG]   [GESTURE] ORIGIN:wake-up finish.
[04.09.2023 12:50.19.393] [LOG]   [GESTURE] ORIGIN:Paj7620 initialize register finished.
[04.09.2023 12:59.32.764] [LOG]   Keyboard Interrupted

I use a Raspberry Pi 4 4GB with MagicMirror² v2.24.0 (the latest version…).

Do you remeber wich “i2c” speed you have used for fix the problem?

Thanks.

MMRIZE · Sep 5, 2023, 12:42 PM

@Egnos
Try 10000 or 32000.

MMRIZE · Sep 5, 2023, 1:04 PM

@Egnos
However the “terminated” message itself is nothing wrong.
“Too often without any gesture triggered” cases only be the issue.