Read the statement by Michael Teeuw here.
Need Help with magicmirror
-
@WM1600 rename the folder
cd ~/
mv MagicMirror MagicMirror. oldthen run my install script
see
https://github.com/sdetweil/MagicMirror_scriptsit will do all the setup install node and npm,
sometimes the problem
for install is so messed up, you have to refresh the sd card and then run my scriptthe script will also setup pm2 to launch at boot if you say yes at the prompt
if the install is successful you an copy the two json files for Google photos from the prior folder
-
@sdetweil thank you,
I have re-installed Magic Mirror and chose to disable screen save and to start magicmirror on boot-up.
the install worked for magicmirror and and when I go to the magic mirror folder in terminal and type “npm run start”, magicmirror will start.when I turn the terminal off and boot it up, It comes up with a magicmirror boot screen, but then the terminal continues to the normal start-up.
At this point, I can still go to terminal and type npm run start and run magicmirrorAm I missing a step to transition fully into magicmirror?
-
-
@sdetweil
ok,
I have done those.
no change -
@WM1600 what is the output of the pm2 logs command? I need to see
-
the terminal looks like this
will@raspberrypi:~ $ pm2 logs --lines=50
will@raspberrypi:~ $I do not see it doing anything.
[pm2.jpg](Input file contains unsupported image format)
I tried to upload the PM2.log but it says I can only upload picture files.so I changed pm2.log to pm2.jpg. dont know it that will work.
-
-
when I type in pm2 status
I dont see anything
this is the terminal copied:
will@raspberrypi:~ $ pm2 status
will@raspberrypi:~ $ -
@WM1600 hmmm weird
run the fixuppm2 script from here
https://github.com/sdetweil/MagicMirror_scripts -
I ran the following in terminal
will@raspberrypi:~ $ bash -c “$(curl -sL https://raw.githubusercontent.com/sdetweil/MagicMirror_scripts/master/fixuppm2.sh)”
the log will be saved in /home/will/MagicMirror/installers/pm2_setup.log
/usr/local/bin/node: 1: Syntax error: “)” unexpected
/usr/local/bin/node: 1: Syntax error: “)” unexpected
will@raspberrypi:~ $I have seen “Syntax error: “)” unexpected” before but that is the first time I have seen it twice
here is the log file:
pm2 setup starting - Sun Apr 28 11:19:37 EDT 2024
using parameter bash
system is Linux raspberrypi 6.6.28+rpt-rpi-v8 #1 SMP PREEMPT Debian 1:6.6.28-1+rpt1 (2024-04-22) aarch64 GNU/Linux
the os is Distributor ID: Debian Description: Debian GNU/Linux 12 (bookworm) Release: 12 Codename: bookworm
node version v20.12.1
force installing latest npm version via npm
npm version 10.5.2
pm2 installed
pm2 installed, but does not work, uninstalling
pm2 not installed, installing
get the pm2 platform specific startup command
startup command =
pm2 startup command done
configure the pm2 config file for MagicMirror
the user is not pi
change pm2_MagicMirror.json
now using this config file pm2_MagicMirror_new.json
start MagicMirror via pm2 now
save MagicMirror pm2 config now
pm2 setup completed - Sun Apr 28 11:19:39 EDT 2024
pm2 setup starting - Sun Apr 28 20:25:03 EDT 2024
using parameter bash
system is Linux raspberrypi 6.6.28+rpt-rpi-v8 #1 SMP PREEMPT Debian 1:6.6.28-1+rpt1 (2024-04-22) aarch64 GNU/Linux
the os is Distributor ID: Debian Description: Debian GNU/Linux 12 (bookworm) Release: 12 Codename: bookworm
node version v20.12.1
force installing latest npm version via npm
npm version 10.5.2
pm2 installed
pm2 installed, but does not work, uninstalling
pm2 not installed, installing
get the pm2 platform specific startup command
startup command =
pm2 startup command done
configure the pm2 config file for MagicMirror
the user is not pi
change pm2_MagicMirror.json
now using this config file pm2_MagicMirror_new.json
start MagicMirror via pm2 now
save MagicMirror pm2 config now
pm2 setup completed - Sun Apr 28 20:25:05 EDT 2024it is saying the user is not pi, but this is on a rasberry pi
-
@WM1600 yes, your username is will, not pi
can you do
uname -a file $(which bash)I think you have a hybrid system
64 bit kernel
32 bit runtimeand you have the wrong (64 bit) node installed
-
will@raspberrypi:~ $ uname -a
Linux raspberrypi 6.6.28+rpt-rpi-v8 #1 SMP PREEMPT Debian 1:6.6.28-1+rpt1 (2024-04-22) aarch64 GNU/Linux
will@raspberrypi:~ $ file $(which bash)
/usr/bin/bash: ELF 64-bit LSB pie executable, ARM aarch64, version 1 (SYSV), dynamically linked, interpreter /lib/ld-linux-aarch64.so.1, BuildID[sha1]=198ac6b0cc01bf774c5746a36a6fd31dead9bda5, for GNU/Linux 3.7.0, stripped
will@raspberrypi:~ $ -
@WM1600 ok then…
hm… trying to figure out the best way to fix this
the bad node install is hard to get out of.
I think redoing the sd card is the cleanest
use my backup script to save the MagicMirror setup.
https://github.com/sdetweil/MagicMirror-backup-restoreit’s three files plus any addon files made by modules, like the token file for photos
one little directory.if you use github then it can save all that to a private repo u build on github.
otherwise copy the folder off somewhere you can get it back
make the new sd card,
boot, don’t update during bootup
install MagicMirror using my install script
https://github.com/sdetweil/MagicMirror_scripts
which will update node/npm toothen restore your MagicMirror setup
-
Sam,
wanted to get back with you and let you know that the re-install worked.
Thank you very much for the help, I could not have done it with out you!
Will
-
S sdetweil has marked this topic as solved on
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login