Read the statement by Michael Teeuw here.
MMM-Pir issues since latest updates
-
Since installing the latest updates I am receiving the following error
[2024-09-09 10:02:10.794] [ERROR] [MMM-Pir] [LIB] [PIR] Error: Cannot determine SOC peripheral base address
[2024-09-09 10:02:10.836] [WARN] [MMM-Pir] [LIB] [PIR] [PYTHON] The exit code was: 0
[2024-09-09 10:02:10.836] [WARN] [MMM-Pir] [LIB] [PIR] [PYTHON] The exit signal was: nullThe pir meter counts down but is not reset.
Ive tried rebuilding the Pir program to no avail
Any help would be appreciated.
-
@eyesallin This has been quicly fixed in the python-gpiozero package and the workaround is not needed anymore.
-
@eyesallin this is an issue with the latest RPi5 kernel. Until a fix is available a workaround is the following command:
sudo ln -s /dev/gpiochip0 /dev/gpiochip4More info about it:
-
Many thanks for the response, surprised others have not posted?
-
@eyesallin This has been quicly fixed in the python-gpiozero package and the workaround is not needed anymore.
-
Thankyou just noted, problem solved.
-
S sdetweil has marked this topic as solved on
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login