Netatmo module will not shown

kusselin · Apr 25, 2025, 2:06 PM

@rkorell said in Netatmo module will not shown:

@kusselin Are there any error messages?
Check log as well as dev-console …
“Netatmo load” could be an indicator that module stucks in the middle of nowhere…

Regards,
Ralf

Hello, thank you for the information.
Here from the console in Mozilla Firefox with the F12 key

Initializing MagicMirror². main.js:582:8
Bootstrapping module: alert loader.js:151:7
Bootstrapping module: updatenotification loader.js:151:7
Bootstrapping module: clock loader.js:151:7
Bootstrapping module: calendar loader.js:151:7
Bootstrapping module: compliments loader.js:151:7
Bootstrapping module: MMM-OpenmapWeather loader.js:151:7
Bootstrapping module: netatmo loader.js:151:7
Bootstrapping module: MMM-Blitzer loader.js:151:7
Bootstrapping module: MMM-F1 loader.js:151:7
Bootstrapping module: MMM-ApothekenNotdienst loader.js:151:7
Bootstrapping module: MMM-ioBroker loader.js:151:7
Bootstrapping module: MMM-Carousel loader.js:151:7
Bootstrapping module: MMM-PublicTransportHafas loader.js:151:7
Bootstrapping module: MMM-RNV loader.js:151:7
Bootstrapping module: MMM-Fuel loader.js:151:7
Bootstrapping module: MMM-Carousel loader.js:151:7
Bootstrapping module: MMM-Remote-Control loader.js:151:7
Bootstrapping module: newsfeed loader.js:151:7
Starting module: alert alert.js:43:7
Starting module: updatenotification updatenotification.js:19:7
Starting module: clock clock.js:43:7
Starting module: calendar calendar.js:96:7
Starting module: compliments compliments.js:40:7
Starting module: MMM-OpenmapWeather MMM-OpenmapWeather.js:127:7
Starting module: netatmo netatmo.js:71:9
Starting module: MMM-F1 MMM-F1.js:24:13
Starting module: MMM-ApothekenNotdienst with identifier: module_10_MMM-ApothekenNotdienst MMM-ApothekenNotdienst.js:13:9
Starting module: MMM-ioBroker MMM-ioBroker.js:52:9
Starting module: MMM-Carousel with identifier: module_12_MMM-Carousel MMM-Carousel.js:99:9
Starting module: MMM-PublicTransportHafas with identifier: module_13_MMM-PublicTransportHafas MMM-PublicTransportHafas.js:61:9
Starting module: MMM-RNV MMM-RNV.js:14:664
Starting module: MMM-Fuel MMM-Fuel.js:180:13
Starting module: MMM-Carousel with identifier: module_16_MMM-Carousel MMM-Carousel.js:99:9
Starting module: MMM-Remote-Control MMM-Remote-Control.js:22:9
Starting module: newsfeed newsfeed.js:67:7
All modules started! main.js:601:8
sorting events count=0 calendar.js:704:7
slicing events total maxcount=10 calendar.js:744:7
sorting events count=63 calendar.js:704:7
sorting events count=10 calendar.js:704:7
slicing events total maxcount=10 calendar.js:744:7
event fullday 10 calendar.js:506:12
sorting events count=63 calendar.js:704:7
sorting events count=10 calendar.js:704:7
slicing events total maxcount=10 calendar.js:744:7
event fullday 10 calendar.js:506:12

Yes, I had them generate a token and ID for me on the developer page like on the Fenner github page.
Do I have to name my devices like this? I have a wind sensor, rain sensor and an outdoor station. Is that correct with humidity etc…in English?

kusselin · Apr 25, 2025, 2:10 PM

@det said in Netatmo module will not shown:

@kusselin
Also check that your registration is correct. Make sure you have a current “token.js”.

Yes, what should I check there…is clearly described…the ClientSecret, the refresh_token and the ClientID…
the ID and the clientSecret are already there and the token can be generated with the “read station” in the selection.

Do you also have netatmo running?

Generally speaking, it’s already running, isn’t it?

Where can i found the logs? under pm2 or npm?? i installed the MM from here in a proxmox container

https://community-scripts.github.io/ProxmoxVE/scripts?id=magicmirror

sdetweil · Apr 25, 2025, 4:48 PM

@kusselin so, where does the ui for this module run?

are you doing npm run server in the container?

this module depends on the ui running to kick off the helper

you should see messages wherever you start MagicMirror

npm start
pm2 launches a script, which does nom start or npm run server
then pm2 captures all the output

in a docker/proxmox container you should see the output in the container logs

kusselin · Apr 25, 2025, 5:26 PM

@sdetweil
Thank you. I installed MM using the proxmox helpers script. When I restart MM, it always starts automatically

look please…can you see what:

root@magicmirror-live:/opt/magicmirror# npm run server

> magicmirror@2.31.0 server
> node ./serveronly

[2025-04-25 19:25:22.927] [LOG]   Starting MagicMirror: v2.31.0
[2025-04-25 19:25:22.939] [LOG]   Loading config ...
[2025-04-25 19:25:22.940] [LOG]   config template file not exists, no envsubst
[2025-04-25 19:25:23.250] [INFO]  Checking config file /opt/magicmirror/config/config.js ...
[2025-04-25 19:25:23.343] [INFO]  Your configuration file doesn't contain syntax errors :)
[2025-04-25 19:25:23.344] [INFO]  Checking modules structure configuration ...
[2025-04-25 19:25:23.398] [INFO]  Your modules structure configuration doesn't contain errors :)
[2025-04-25 19:25:23.787] [LOG]   Loading module helpers ...
[2025-04-25 19:25:23.797] [LOG]   No helper found for module: alert.
[2025-04-25 19:25:23.814] [LOG]   Initializing new module helper ...
[2025-04-25 19:25:23.822] [LOG]   Module helper loaded: updatenotification
[2025-04-25 19:25:23.822] [LOG]   No helper found for module: clock.
[2025-04-25 19:25:24.047] [LOG]   Initializing new module helper ...
[2025-04-25 19:25:24.047] [LOG]   Module helper loaded: calendar
[2025-04-25 19:25:24.048] [LOG]   No helper found for module: compliments.
[2025-04-25 19:25:24.048] [LOG]   No helper found for module: MMM-OpenmapWeather.
[2025-04-25 19:25:24.052] [LOG]   Initializing new module helper ...
[2025-04-25 19:25:24.052] [LOG]   Module helper loaded: netatmo
[2025-04-25 19:25:24.053] [WARN]  No /opt/magicmirror/modules/MMM-OpenWeatherForecast/MMM-OpenWeatherForecast.js found for module: MMM-OpenWeatherForecast.
[2025-04-25 19:25:24.053] [LOG]   No helper found for module: MMM-OpenWeatherForecast.
[2025-04-25 19:25:24.053] [LOG]   No helper found for module: MMM-Blitzer.
[2025-04-25 19:25:24.250] [LOG]   Initializing new module helper ...
[2025-04-25 19:25:24.251] [LOG]   Module helper loaded: MMM-F1
[2025-04-25 19:25:24.252] [LOG]   Initializing new module helper ...
[2025-04-25 19:25:24.252] [LOG]   Module helper loaded: MMM-ApothekenNotdienst
[2025-04-25 19:25:24.253] [LOG]   Initializing new module helper ...
[2025-04-25 19:25:24.253] [LOG]   Module helper loaded: MMM-ioBroker
[2025-04-25 19:25:24.253] [LOG]   No helper found for module: MMM-Carousel.
[2025-04-25 19:25:24.256] [LOG]   Initializing new module helper ...
[2025-04-25 19:25:24.263] [LOG]   Module helper loaded: MMM-PublicTransportHafas
[2025-04-25 19:25:24.464] [LOG]   Initializing new module helper ...
[2025-04-25 19:25:24.465] [LOG]   Module helper loaded: MMM-RNV
[2025-04-25 19:25:24.465] [LOG]   Initializing new module helper ...
[2025-04-25 19:25:24.466] [LOG]   Check MagicMirror² version for node helper 'MMM-Fuel' - Minimum version: 2.15.0 - Current version: 2.31.0
[2025-04-25 19:25:24.466] [LOG]   Version is ok!
[2025-04-25 19:25:24.466] [LOG]   Module helper loaded: MMM-Fuel
[2025-04-25 19:25:24.494] [LOG]   Initializing new module helper ...
[2025-04-25 19:25:24.495] [LOG]   Module helper loaded: MMM-Remote-Control
[2025-04-25 19:25:24.544] [LOG]   Initializing new module helper ...
[2025-04-25 19:25:24.545] [LOG]   Module helper loaded: newsfeed
[2025-04-25 19:25:24.545] [LOG]   All module helpers loaded.
[2025-04-25 19:25:24.549] [LOG]   Starting server on port 8080 ...
[2025-04-25 19:25:24.550] [WARN]  You're using a full whitelist configuration to allow for all IPs
[2025-04-25 19:25:24.561] [ERROR] Whoops! There was an uncaught exception...
[2025-04-25 19:25:24.561] [ERROR] Error: listen EADDRINUSE: address already in use 0.0.0.0:8080
    at Server.setupListenHandle [as _listen2] (node:net:1939:16)
    at listenInCluster (node:net:1996:12)
    at node:net:2205:7
    at process.processTicksAndRejections (node:internal/process/task_queues:90:21) {
  code: 'EADDRINUSE',
  errno: -98,
  syscall: 'listen',
  address: '0.0.0.0',
  port: 8080
}
[2025-04-25 19:25:24.561] [ERROR] MagicMirror² will not quit, but it might be a good idea to check why this happened. Maybe no internet connection?
[2025-04-25 19:25:24.561] [ERROR] If you think this really is an issue, please open an issue on GitHub: https://github.com/MagicMirrorOrg/MagicMirror/issues
[2025-04-25 19:25:24.648] [INFO]  System information:
### SYSTEM:   manufacturer: ; model: ; virtual: false
### OS:       platform: linux; distro: Debian GNU/Linux; release: 12; arch: x64; kernel: 6.8.12-8-pve
### VERSIONS: electron: undefined; used node: 22.15.0; installed node: 22.15.0; npm: 10.9.2; pm2: 5.4.3
### OTHER:    timeZone: Europe/Berlin; ELECTRON_ENABLE_GPU: undefined

sdetweil · Apr 25, 2025, 6:37 PM

@kusselin netatmo is not in the module list

also the address already in use means the server is running already from whatever script is launched at container startup

in container you cannot run manual npm run server if the container does that

same as if pm2 autostarted on native os or virtual machine

kusselin · Apr 25, 2025, 7:11 PM

@sdetweil
And what does that tell me now? Does that mean I can’t change anything…netatmo won’t work?

rkorell · Apr 25, 2025, 8:02 PM

@kusselin
Sorry I‘m out here because I do not have any experience with proxmox containers.

But in general, what Sam means is that your last log-output indicates that you had tried to start a seond instance of MagicMirror -which fails.
So I guess it is necessary to identify the primary instance and look for logs there .
What I have seen in addition but cannot justify: Your above output looks like you‘re working with root permission.

root@magicmirror-live:/opt/magicmirror# npm run server

As far as I remember correctly, this may causes difficulties as well - at least I remember to read something like this - context was different and it‘s possible that this doesn‘t apply to container-environments …

Good luck!
Regards,
Ralf

sdetweil · Apr 25, 2025, 8:06 PM

@kusselin no, just have to restart the container…

I am installing proxmox on a vmware VM now,

sdetweil · Apr 25, 2025, 8:38 PM

@kusselin so with the script I get a container starting to be built, but it has no network
I see it in the list, can start/stop. but no network.

this is proxmox in a VM, not native on the hardware…

I did get a vmware warning that proxmox was trying to set promiscuous mode, but that is not allowed

kusselin · Apr 26, 2025, 4:07 AM

@rkorell said in Netatmo module will not shown:

@kusselin
Sorry I‘m out here because I do not have any experience with proxmox containers.

But in general, what Sam means is that your last log-output indicates that you had tried to start a seond instance of MagicMirror -which fails.
So I guess it is necessary to identify the primary instance and look for logs there .
What I have seen in addition but cannot justify: Your above output looks like you‘re working with root permission.
root@magicmirror-live:/opt/magicmirror# npm run server
As far as I remember correctly, this may causes difficulties as well - at least I remember to read something like this - context was different and it‘s possible that this doesn‘t apply to container-environments …

Good luck!
Regards,
Ralf

One question: Do you have Netatmo installed and running at home as hardware and searching in MM…?