Need help with MMM-MQTTbridge not "communicating" with MMM-RTSPStream

sdetweil

@Cr4z33 i dont know, but MQTTBridge was not informed of the button press as you expected

is your other bridge code running? you mentioned you had some app talking to the doorbell and publishing the mqtt message

is the doorbell an mqtt device , fed thru zigbee2mqtt for homeassistant?
or is there a native integration?
i would expect the doorbell to NOT publish to mqtt directly
it would be a tiny market to add and support that code IN the doorbell firmware

sdetweil

@Cr4z33 you could build an HA automation to send the MQTT message on button push

Cr4z33

@sdetweil said in Need help with MMM-MQTTbridge not "communicating" with MMM-RTSPStream:

@Cr4z33 you could build an HA automation to send the MQTT message on button push

But then again nothing would happen.

I mean I’ve already DahuaVTO2MQTT in the middle and I used the right line taken from its console, but here we are. 😅

sdetweil

@Cr4z33 something is not sending the mqtt message

bell -> ha automation -> mqtt -> mqttbridge -> rtsp…
should work

for me, this works

alexa-> nodered -> mqtt > ha automation -> mqtt -> mirror_app -> screen off

Cr4z33

@sdetweil said in Need help with MMM-MQTTbridge not "communicating" with MMM-RTSPStream:

@Cr4z33 something is not sending the mqtt message

bell -> ha automation -> mqtt -> mqttbridge -> rtsp…
should work

for me, this works

alexa-> nodered -> mqtt > ha automation -> mqtt -> mirror_app -> screen off

And you are using this MQTT module on the smart mirror or?

sdetweil

@Cr4z33 no, i wrote my own code for the mqtt integration

but its fundamentally doing the same thing, receiving an mqtt message and sending a notification to other code to act

Cr4z33

@sdetweil I see I wish I had the same skills to do ALL by myself lol!

However I wonder if I am the only person in the world having a smart video doorbell and MagicMirror?

I mean I haven’t found any universal solution to this in this forum, but just some modules for certain doorbell hardware like Ring, etc.

sdetweil

@Cr4z33 and the ring module talks directly to the ring doorbell

you should be able to use HA automation to get to mqttBridge, no fancy coding

automation trigger
device bell button push
action, more, command, mqtt publish

i have ring doorbell, and the module doesnt work for me
doesnt matter, as im hardly ever in front of the smartmirror when the doorbell rings
there is a ring2mqtt docker container, but again it really doesnt add anything useful

Cr4z33

@sdetweil and how would I get the broadcasting of the doorbell video feed?

Custom coding?

sdetweil

@Cr4z33 same rtspstream, that part of your solution didn’t change

button -> ha automation -> mqtt publish -> mqttbridge -> notification to rtspstream to open and connect video feed

altho you may have to use
https://github.com/evroom/MMM-MPlayer
instead of rtspstream module

and install MMM-ViewNotifications to see the events sent inside MagicMirror

Cr4z33

@sdetweil hmm I want to give it a try tomorrow morning (GMT+2).

Would you mind if I might contact you by PM just in case? 🥺

sdetweil

@Cr4z33 no problem. i am US Central UTC-5

wishmaster270

@Cr4z33
Hi and sorry fir the late reply…
Your config of the MQTT module is still missing a “debug: true”. The messages only get logged if debugging is enabled.

	{
		module: 'MMM-MQTTbridge',
		disabled: false,
		config: {
                        debug: true, 
			mqttServer: "mqtt://:@ipaddress:port",
			mqttConfig:
			{
				listenMqtt: true,
				interval: 500,
			},
			notiConfig:
			{
				listenNoti: true,
				ignoreNotiId: ["CLOCK_MINUTE", "NEWS_FEED"],
				ignoreNotiSender: ["system", "NEWS_FEED"],
			},
			// set "NOTIFICATIONS -> MQTT" dictionary at /dict/notiDictionary.js
			// set "MQTT -> NOTIFICATIONS" dictionary at /dict/mqttDictionary.js
			},
	}

sdetweil

@wishmaster270 yes, we covered that before
https://forum.magicmirror.builders/post/126008

sdetweil

@wishmaster270 i’ve come to the conclusion

the doorbell itself does not publish to mqtt
MqttBridge did not get any message from its subscribe

he is going to try to build a HomeAssistant automation, as it CAN see the doorbell button thru its integration

Cr4z33

@wishmaster270 thanks for spending some time on my issue although you’re busy.
As sdetweil said he’s already helping me into this. 🙂

@sdetweil my bad, my bad and again my bad! 😓

I was going to tryout your method when I realized I actually never checked deeply what was outputting npm start… There’s A LOT of doorbell data being captured by MMM-MQTTbridge indeed! 🤦🏼

You can see here the output.

Can you see at this point (maybe) some additional data that needs to be added to mqttDictionary.js or do you still believe I should go your way (HA, automation, etc.)?

While waiting for your kind reply I will play at trying your method. 😁

rkorell

@Cr4z33 Good afternoon,
I do not have the time to dig too deep into MMM-MQTTbridge …
But what I see checking your console logfile and compare this to your first posting:
You obviously had managed that the MQQT message arrives and is acknowledged.

.
The message you receive is:

{
    "Action": "Pulse",
    "Code": "Invite",
    "Data": {
        "CallID": "5",
        "IsEncryptedStream": false,
        "LocaleTime": "2025-04-30 10:40:43",
        "LockNum": 2,
        "RealUTC": 1746002443,
        "SupportPaas": false,
        "TCPPort": 37777,
        "UTC": 1746006043.0,
        "UserID": "101"
    },
    "Index": 0,
    "deviceType": "DHI-VTO3311Q-WP",
    "serialNumber": "****"
}

This is what you trying to capture in your mqttDisctionary.js
I’m not 100% sure if you

catch the right data-value : - is your jsonpath correct?
is “notiID” the right place for the module name you try to reach?

Just spontaneous thoughts about your issue - maybe misleading …

Regards,
Ralf

Cr4z33

@rkorell hi it’s a good question indeed.

However too bad that I am not skilled enough to know the answer lol that’s why I am posting here asking for help! 😂

Let’s see if @sdetweil or someone else can find out.

sdetweil

@Cr4z33 woohoo, i see the data, now its MQTTBridge configuration, and that part i dont know (yet)

rkorell

@Cr4z33 OK, I guess you have to dig a little bit deeper into MMM-MQTTbridge …
You may give MQTTbind a try - this seems to be easier and more straightforward…

In addition: I’m not really sure if your RTSP-play module is able to react on notification - had you double-checked this? (If it does not react on notification, you cannot be successful…).

Regards,
Ralf