Read the statement by Michael Teeuw here.
MMM-AlexaPi
-
@johnnyboy i reinstalled the module and selected MagicMirror as the device and its been working since. I’ll be switching to my Kinobo USB mic this weekend…
Full time Dad, DJ and entertainer and lover of technology.
-
Solid! Good job guys!
-
Good morning guys,
a quick question for everyone who managed to get this to work. How is the performance when leaving the mirror on for a couple of hours?I havent had the time to properly test it yet, but yesterday night I was under the impression that the MMM-AlexaPi module is quite a heavy hitter performance wise. I use a raspberry pi 3 and don’t feel like I overloaded it (only default modules + mmm-alexapi, motion detection and mmm-uklivebusinfo as 3rd party ones). But the newsticker got stuck after ten minutes and I was unable to close or alt+tab out of magic mirror. Again, I havent tested it properly yet since I didnt have the time, just wondering whether you experienced similar slow-downs.
Best regards / Dave
-
This post is deleted! -
This post is deleted! -
@Davepre If you lost the “hello” at the beginning, you might be able to change back to ‘vlc’ as playback_handler and see if that works. I’ve had the best results with ‘sox’, however, I’m currently running on v1.4 with vlc as my handler and it’s working great. I get my flash briefing, I get music access from TuneIn and iHeartRadio. It’s almost as good as my Dot that I have in the kitchen.
-
@Davepre said in MMM-AlexaPi:
Good morning guys,
a quick question for everyone who managed to get this to work. How is the performance when leaving the mirror on for a couple of hours?I havent had the time to properly test it yet, but yesterday night I was under the impression that the MMM-AlexaPi module is quite a heavy hitter performance wise. I use a raspberry pi 3 and don’t feel like I overloaded it (only default modules + mmm-alexapi, motion detection and mmm-uklivebusinfo as 3rd party ones). But the newsticker got stuck after ten minutes and I was unable to close or alt+tab out of magic mirror. Again, I havent tested it properly yet since I didnt have the time, just wondering whether you experienced similar slow-downs.
Best regards / Dave
Every once in a while the mirror sticks but not often. I’ve been running AlexaPi from the start. Usually I just CTRL+Q to restart the mirror or I reboot. I have a reboot button on the side of my mirror. see my setup here. I also have a monitor off button. I have an old LCD monitor that get very hot and overheats, turning off the HDMI, so I keep it off most of the time, however Alexa still runs in the background. I also have a temperature sensor on my MM and I have a 5V fan attached to my Pi to keep it cool. It stays belwo 45degC.
-
@lucallmon Thanks for the feedback. I hope to get the chance to test a bit more during the weekend and report back if the performce issues become really bad :)
Best regards / Dave
-
changing to sox helped me get the hello at start…and improved playback for me…it’s a little slow but a cool feature…
-
Hello everybody,
first off all i want to give all of you a BIG THANKS for helping me out ;-) :-)
I had some trouble’s installing and setting up Alexa with MM.
After reading the forums and the people having the same issue, this entry helped me a lot and i have Alexa integrated in MM and working now.Wow wat is everybody so motivated and helpfull. Keep up the good work everybody and looking forward making MM the best.
Greets a happy MM beginner.
