Roomtemperature with DS18B20

[Chiggo]

Thank you for fast reply.

I will give it a try tomorrow and check if i get it.
My first steps in JS :sweat_smile:

[Chiggo]

Spend some time to figure out what you mean, but i stuck again.
Now at this point

Here is the MMM-Temperature.js

Module.register('MMM-Temperature', {

        defaults: {
                prependString: 'Raumtemperatur: '
        },


        start: function() {
                this.temperature = 'fetching...';
                this.sendSocketNotification('CONNECT');
        },


        socketNotificationReceived: function(notification, temp) {
            if (notification === 'TEMPERATURE') {
                this.temperature = temp;
                this.updateDom();
            }
        },


        // Override dom generator.
        getDom: function() {
                var wrapper = document.createElement("div");
                wrapper.innerHTML = this.config.prependString + this.temperature;
                return wrapper;
        },

});

And here is the node_helper.js

var NodeHelper = require("node_helper");
var sensor = require('ds18x20');


 module.exports = NodeHelper.create({
        start: function function_name () {
                var self = this;
                setInterval(function() {
                        self.sendTemperature();
                }, 10000);
        },


        sendTemperature: function() {
                var self = this;
                var temp = sensor.get('28-04163746c8ff');
                self.sendSocketNotification('TEMPERATURE', temp);
        },
 });

It seems that the MMM-Temperature module is not trying to call the node_helper.js
Not sure why it doesn’t. Or even if, i don’t know why the node_helper.js doesn’t work.

Maybe this has something to do with the "sendSocketNotification(‘CONNECT’) ???
It’s never mentioned in the node_helper.

[Chiggo]

It works!

after testing some things PM2 didn’t work anymore, so i recovered from a backup, installed the drivers for the DS18B20 again, copied the scripts back, restarted and it works.

Don’t know why and how, but it does :smile:

Solved!

[Phate]

@Chiggo

This sounds awesome…

Is this downloadable from github?

[Chiggo]

@Phate

No, it’s not available on GitHub. But with the hints from @MichMich it was pretty easy to realize.

To load the drivers for the DS18B20 I followed these instructions https://www.kompf.de/weather/pionewiremini.html

To get the DS18B20 working with node.js I installed this https://www.npmjs.com/package/ds18x20

And finaly I edited the scripts of the systemtemperature-module and it works.

Step-by-Step

• Add this line to your /boot/config.txt

dtoverlay=w1-gpio,gpiopin=4,pullup=on

• Add to your /etc/modules following and reboot the Pi

w1-gpio pullup=1 
w1-therm

• Note the ID of your sensor (go to /sys/bus/w1/devices and list the files, the ID should look something like this 28-04163746c8ff
• Got to /MagicMirror/modules and create a folder named MMM-Temperature
• Create a file named MMM-Temperature.js and copy the code from my post for this script
• Create a file named node_helper.js and copy the code from my post and change the ID of my sensor to yours (it’s in line 16)
• Register this module in your /MagicMirror/config/config.js
• Restart your MM and you are done :)

Hope I could help. Let me know if it works.

[Phate]

@Chiggo

Mate. That’s just awesome.

Few worry spots but sure I can make that happen.

I made sure to order the same temp module so hopefully I shouldn’t have trouble.

Thanks mate. Awesome.

May have questions tho so will yell out of i do when eBay comes thru lol

Thanks again

[A Former User]

This post is deleted!

[Kristianson]

Excellent! Thanks for the code above, worked beautifully… :-)