MMM-AssistantMk2

ToastedToasty

@Sean Hi Sean I’ve been trying to setup MMM-Assistant however after renaming my client-secret.json file to credentials.json and running the auth_and_test.json the OAuth2 page to get my token gives me an error 500, any ideas?

A Former User

@toastedtoasty Usually, 500 error means your google project has something wrong. I suggest you remove your google project and recreate again. (I doubt you might have two or more projects and have some confusing about selecting them)

dvbit

@Sean
I have all setup correctly and no error with the configs.
I think I have understood the correct working of transcriptionhook but it does not fire the related actions.
Can you confirm it is like this the logic:
I setup a keyword in the config (unicorn) in the example you provide.
Notification trigger catches the word if it is spoken after the hotword.
The related action is fired.

Unfortunately nothing is triggered . Also : should I see some feedback in the console windows if the hook triggers ?
Thanks as usual for the support

dvbit

@toastedtoasty I think you might have forgot to configure your mail in the oauth tab in google Dev console.
This happened to me.

A Former User

@dvbit You can add

console.log("hook", k)

in line 100 of node_helper.js to check whether hookstring be caught or not.

dvbit

@sean Thanks… guess what? assistant setup in my mother tongue did not catch english hook :-D

teitlebot

@sean @JRCelis Im having the same issue with the buzz and im also using the HAT. Did you fix the issue? Is there a way to just not use the HAT I have a usb mic but Im new at the whole raspberry thing.
Looks like a great module but im having small hickups along the way.

MarkV

I’ve installed MMM-AssistantMk2 with MMM-Hotword and MMM-NotificationTrigger.
Everything works fine except for the return audio.
It stutters and i’m getting the idea that it isn’t procest quick eneough.

Am i the only one with this problem and if not does somebody have the solution?

A Former User

@markv @teitlebot
There could be many reasons for that case.
Maybe too many modules or too many front-end refreshing or animating, too many background process or anything else, even including internet speed.
I cannot point specific reason at this moment.
Anyway in my device, I use BT speaker and I have no problem about that. Sorry.

MarkV

@sean
Thanks for the reply.
I was scared of something like that. After a clean raspbian image i just installed MagicMirror and after that MMM-AssistantMK2, MMM-Hotword and MMM-TriggerNotification (with all the nmp rebuild errors). I’ve uninstalled the compleet LibreOffice and game packets wich come by default with raspbian.

I allready made a .asoundrc file like you can find around the internet.
aplay && arecord work fine without glitches.

Result .asoundrc

pcm.!default {
  type asym
  capture.pcm "mic"
  playback.pcm "speaker"
}
ctl.!default {
        type hw
        card 0
}
pcm.mic {
  type plug
  slave {
    pcm "hw:1,0"
  }
}
pcm.speaker {
  type plug
  slave {
    pcm "hw:0,0"
    rate 18000
  }
}

Results aplay -l && arecord -l

pi@MagicMirror2:~ $ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: ALSA [bcm2835 ALSA], device 0: bcm2835 ALSA [bcm2835 ALSA]
  Subdevices: 7/7
  Subdevice #0: subdevice #0
  Subdevice #1: subdevice #1
  Subdevice #2: subdevice #2
  Subdevice #3: subdevice #3
  Subdevice #4: subdevice #4
  Subdevice #5: subdevice #5
  Subdevice #6: subdevice #6
card 0: ALSA [bcm2835 ALSA], device 1: bcm2835 ALSA [bcm2835 IEC958/HDMI]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
pi@MagicMirror2:~ $ arecord -l
**** List of CAPTURE Hardware Devices ****
card 1: Device [USB PnP Sound Device], device 0: USB Audio [USB Audio]
  Subdevices: 1/1
  Subdevice #0: subdevice #0

Result lsmod

pi@MagicMirror2:~/MagicMirror $ lsmod
Module                  Size  Used by
fuse                  106496  3
cfg80211              573440  0
rfkill                 28672  2 cfg80211
joydev                 20480  0
ads7846                20480  0
hwmon                  16384  1 ads7846
snd_bcm2835            32768  1
spi_bcm2835            16384  0
i2c_bcm2835            16384  0
fixed                  16384  0
uio_pdrv_genirq        16384  0
uio                    20480  1 uio_pdrv_genirq
evdev                  24576  8
snd_usb_audio         172032  0
snd_hwdep              16384  1 snd_usb_audio
snd_usbmidi_lib        32768  1 snd_usb_audio
snd_rawmidi            32768  1 snd_usbmidi_lib
snd_seq_device         16384  1 snd_rawmidi
snd_pcm                98304  2 snd_usb_audio,snd_bcm2835
snd_timer              32768  1 snd_pcm
snd                    69632  10 snd_hwdep,snd_usb_audio,snd_timer,snd_rawmidi,snd_usbmidi_lib,snd_seq_device,snd_bcm2835,snd_pcm
i2c_dev                16384  0
ip_tables              24576  0
x_tables               32768  1 ip_tables
ipv6                  434176  22

What would you suggest doing now? I’m a little stuck now, due to my lack of knowledge of Linux.