MMM-AssistantMk2

[citizendevpi]

@sean **** List of CAPTURE Hardware Devices ****
card 0: sndrpigooglevoi [snd_rpi_googlevoicehat_soundcar], device 0: Google voiceHAT SoundCard HiFi voicehat-hifi-0 []
Subdevices: 0/1
Subdevice #0: subdevice #0

[A Former User]

@citizendevpi
Your recording device is plughw:0,0. or default. Remember it.

Then try this.

arecord -d 10 test.wav  

Say something. It will be record your voice to test.wav on 10 secs.
Works?

If so, then,

aplay test.wav 

It should play previous recording from arecord. Can you hear anything?

[citizendevpi]

@sean yes barley
but yes

[A Former User]

@citizendevpi
Your Mic and Speaker are both the default. So, Now, show your config to me.

[citizendevpi]

This post is deleted!

[A Former User]

UPDATE

[2.1.0] - 2018.11.14

• Customizable command feature is added. Now you can control your device and MM without other module’s help.
  And notification system of transcriptionHook is changed. New configuration is needed.
• Prepared hook commands. Say these (Or customize them in configuration)
  • hide all : modules on screen will be hidden
  • show all : hidden modules will be shown again
  • reboot yourself : reboot device
  • shutdown yourself : shutdown device
  • go to sleep : LCD power off (you might need to modify /scripts/screenoff.sh)
  • wake up : LCD power on (you might need to modify /scripts/screenon.sh)
• onIdle feature be added. After timer without no query after last query, command will be activated. (By default, after 30min All modules will be hidden.)
• And onActivate feature is added. When you activate Assistant, this command will be executed after timer. (By default, modules hidden by onIdle will be shown again)
• For update from 2.0.0

cd ~/MagicMirror/modules/MMM-AssistantMk2
git pull

[Cr4z33]

@sean thanks for the update, but what are those fireworks?

Nothing to do with your module or? :grinning_face:

[A Former User]

@cr4z33 I wanted someone to ask about Fireworks. :D. I’m making that module for my X-mas eyecandy.
But unfortunately, on RPI the speed is crazy slow. I’m doing optimization, but hard. :D. If I get a success, I’ll release.

[Cr4z33]

@sean lol alright although I personally wouldn’t use it. :grinning_face_with_smiling_eyes:

[teitlebot]

@Sean
Thanks for the update. I have two small issues after update.
For some weird reason most of my modules go blank after some time and only turn back on after I trigger assistant with voice.
Also the feedback window only shows up at the bottom if the speaker icon is top right of screen but if I try moving icon the feedback window ends up being in very small areas of screen.
I can post video if I’m not explaining well.