How do I get the Google AIY Voice HAT installed so that MMM can use it?

[fribse]

Hi @Sean

Thankyou for helping me.

Hmm:

pi@magicmirror:~ $ arecord -l
**** List of CAPTURE Hardware Devices ****
pi@magicmirror:~ $ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: ALSA [bcm2835 ALSA], device 0: bcm2835 ALSA [bcm2835 ALSA]
Subdevices: 7/7
Subdevice #0: subdevice #0
Subdevice #1: subdevice #1
Subdevice #2: subdevice #2
Subdevice #3: subdevice #3
Subdevice #4: subdevice #4
Subdevice #5: subdevice #5
Subdevice #6: subdevice #6
card 0: ALSA [bcm2835 ALSA], device 1: bcm2835 IEC958/HDMI [bcm2835 IEC958/HDMI]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: ALSA [bcm2835 ALSA], device 2: bcm2835 IEC958/HDMI1 [bcm2835 IEC958/HDMI1]
Subdevices: 1/1
Subdevice #0: subdevice #0
pi@magicmirror:~ $

So the hat doesn’t appear at all as it is.
I guess I could get the AIY image, and start with that instead?
Then it should have the right setup.

[A Former User]

@fribse
Sorry, I have no experience of that HAT, so I don’t know its normal or not.

[sdetweil]

@fribse see https://www.raspberrypi.org/forums/viewtopic.php?f=114&t=214753

[fribse]

So @sdetweil and @Sean

I started over, installed the last stretch.
Followed the guide on the link from @sdetweil , and Weheee:

pi@raspberrypi:~ $ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: sndrpigooglevoi [snd_rpi_googlevoicehat_soundcar], device 0: Google voiceHAT SoundCard HiFi voicehat-codec-0 []
  Subdevices: 0/1
  Subdevice #0: subdevice #0
pi@raspberrypi:~ $ arecord -l
**** List of CAPTURE Hardware Devices ****
card 0: sndrpigooglevoi [snd_rpi_googlevoicehat_soundcar], device 0: Google voiceHAT SoundCard HiFi voicehat-codec-0 []
  Subdevices: 1/1
  Subdevice #0: subdevice #0
pi@raspberrypi:~ $

Now I’ll go on, and start over with Magicmirror :-)

[A Former User]

@fribse
There could be one problem. Your mic and speaker now have same id card 0, device 0 When my module try to close the mic(plughw:0,0) to output sound, the speaker(plughw:0,0) will be closed together at same time, so error will occur.
I heard there is a way to assign different id or alias to devices, but don’t know how to do.

[fribse]

@Sean said in How do I get the Google AIY Voice HAT installed so that MMM can use it?:

@fribse
There could be one problem. Your mic and speaker now have same id card 0, device 0 When my module try to close the mic(plughw:0,0) to output sound, the speaker(plughw:0,0) will be closed together at same time, so error will occur.
I heard there is a way to assign different id or alias to devices, but don’t know how to do.

Ok, so it doesn’t use the subdevices to distinguish them, I guess it’s google here I come :-)