Raspi3 Busterfull Screensaverproblem

sdetweil · Nov 22, 2019, 2:06 PM

@pogges i gave it to you

~/screensaver.log

~   means  the users home folder

same as

/home/pi

pogges · Nov 22, 2019, 2:06 PM

xscreensaver running
xscreensaver already disabled
xscreensaver running
xscreensaver already disabled

Mal sehen ob das stimmt. In freudiger Erwartung. Ich melde mich dann:smiling_face_with_open_mouth:

pogges · Nov 22, 2019, 3:37 PM

xscreensaver running
xscreensaver already disabled
xscreensaver running
xscreensaver already disabled
lxsession screen saver already disabled

Trotzdem Hintergrund schwarz.

Tja Satz mit x war wohl nix:worried_face: Auf dem Bildschirm sehe ich den Mauszeiger und beim drücken der Win-Taste geht das Dropdownmenue auf aber der Hintergrund bleibt schwarz.
Ich meine das ist eine Mirrorursache. Soll ich nochmal neu aufsetzen? Brauch man pm2? welche Anleitung kann man denn benutzen wenn die Anweisungen teilweise nicht für Buster sind?

home/pi/.xserver

XScreenSaver Preferences File

Written by xscreensaver-demo 5.42 for pi on Fri Nov 22 13:40:47 2019.

https://www.jwz.org/xscreensaver/

timeout: 0:01:00
cycle: 0:00:00
lock: False
lockTimeout: 0:00:00
passwdTimeout: 0:00:30
visualID: default
installColormap: True
verbose: False
timestamp: True
splash: True
splashDuration: 0:00:05
demoCommand: xscreensaver-demo
prefsCommand: xscreensaver-demo -prefs
nice: 10
memoryLimit: 0
fade: False
unfade: False
fadeSeconds: 0:00:03
fadeTicks: 20
captureStderr: True
ignoreUninstalledPrograms:False
font: -medium-r--140--m-
dpmsEnabled: False
dpmsQuickOff: False
dpmsStandby: 0:00:00
dpmsSuspend: 0:00:00
dpmsOff: 0:00:00
grabDesktopImages: False
grabVideoFrames: False
chooseRandomImages: False
imageDirectory:

mode: off
selected: -1

textMode: url
textLiteral: XScreenSaver
pointerPollTime: 0:00:05
pointerHysteresis: 10
windowCreationTimeout:0:00:30
initialDelay: 0:00:00
GetViewPortIsFullOfLies:False
procInterrupts: True
xinputExtensionDev: False
overlayStderr: True
authWarningSlack: 20

home/pi/etc/xdg/lxsession/LXDE-pi/autostart

@lxpanel --profile LXDE-pi
@pcmanfm --desktop --profile LXDE-pi
@xscreensaver -no-splash
@xset s noblank
@xset s off
@xset -dpms

lightdm

[LightDM]
#start-default-seat=true
#greeter-user=lightdm
#minimum-display-number=0
#minimum-vt=7
#lock-memory=true
#user-authority-in-system-dir=false
#guest-account-script=guest-account
#logind-check-graphical=false
#log-directory=/var/log/lightdm
#run-directory=/var/run/lightdm
#cache-directory=/var/cache/lightdm
#sessions-directory=/usr/share/lightdm/sessions:/usr/share/xsessions:/usr/share/wayland-sessions
#remote-sessions-directory=/usr/share/lightdm/remote-sessions
#greeters-directory=$XDG_DATA_DIRS/lightdm/greeters:$XDG_DATA_DIRS/xgreeters
#backup-logs=true
#dbus-service=true

Seat configuration

Seat configuration is matched against the seat name glob in the section, for example:

[Seat:*] matches all seats and is applied first.

[Seat:seat0] matches the seat named “seat0”.

[Seat:seat-thin-client*] matches all seats that have names that start with “seat-thin-client”.

type = Seat type (local, xremote, unity)

pam-service = PAM service to use for login

pam-autologin-service = PAM service to use for autologin

pam-greeter-service = PAM service to use for greeters

xserver-backend = X backend to use (mir)

xserver-command = X -s 0 -dpms

xmir-command = Xmir server command to run (can also contain arguments e.g. Xmir -special-option)

xserver-config = Config file to pass to X server

xserver-layout = Layout to pass to X server

xserver-allow-tcp = True if TCP/IP connections are allowed to this X server

xserver-share = True if the X server is shared for both greeter and session

xserver-hostname = Hostname of X server (only for type=xremote)

xserver-display-number = Display number of X server (only for type=xremote)

xdmcp-manager = XDMCP manager to connect to (implies xserver-allow-tcp=true)

xdmcp-port = XDMCP UDP/IP port to communicate on

xdmcp-key = Authentication key to use for XDM-AUTHENTICATION-1 (stored in keys.conf)

unity-compositor-command = Unity compositor command to run (can also contain arguments e.g. unity-system-compositor -special-option)

unity-compositor-timeout = Number of seconds to wait for compositor to start

greeter-session = Session to load for greeter

greeter-hide-users = True to hide the user list

greeter-allow-guest = True if the greeter should show a guest login option

greeter-show-manual-login = True if the greeter should offer a manual login option

greeter-show-remote-login = True if the greeter should offer a remote login option

user-session = Session to load for users

allow-user-switching = True if allowed to switch users

allow-guest = True if guest login is allowed

guest-session = Session to load for guests (overrides user-session)

session-wrapper = Wrapper script to run session with

greeter-wrapper = Wrapper script to run greeter with

guest-wrapper = Wrapper script to run guest sessions with

display-setup-script = Script to run when starting a greeter session (runs as root)

display-stopped-script = Script to run after stopping the display server (runs as root)

greeter-setup-script = Script to run when starting a greeter (runs as root)

session-setup-script = Script to run when starting a user session (runs as root)

session-cleanup-script = Script to run when quitting a user session (runs as root)

autologin-guest = True to log in as guest by default

autologin-user = User to log in with by default (overrides autologin-guest)

autologin-user-timeout = Number of seconds to wait before loading default user

autologin-session = Session to load for automatic login (overrides user-session)

autologin-in-background = True if autologin session should not be immediately activated

exit-on-failure = True if the daemon should exit if this seat fails

[Seat:*]
#type=local
#pam-service=lightdm
#pam-autologin-service=lightdm-autologin
#pam-greeter-service=lightdm-greeter
#xserver-backend=
#xserver-command=X s0 -dpms
#xmir-command=Xmir
#xserver-config=
#xserver-layout=
#xserver-allow-tcp=false
#xserver-share=true
#xserver-hostname=
#xserver-display-number=
#xdmcp-manager=
#xdmcp-port=177
#xdmcp-key=
#unity-compositor-command=unity-system-compositor
#unity-compositor-timeout=60
greeter-session=pi-greeter
greeter-hide-users=false
#greeter-allow-guest=true
#greeter-show-manual-login=false
#greeter-show-remote-login=true
#user-session=default
#allow-user-switching=true
#allow-guest=true
#guest-session=
#session-wrapper=lightdm-session
#greeter-wrapper=
#guest-wrapper=
display-setup-script=/usr/share/dispsetup.sh
#display-stopped-script=
#greeter-setup-script=
#session-setup-script=
#session-cleanup-script=
#autologin-guest=false
autologin-user=pi
#autologin-user-timeout=0
#autologin-in-background=false
#autologin-session=
#exit-on-failure=false

XDMCP Server configuration

enabled = True if XDMCP connections should be allowed

port = UDP/IP port to listen for connections on

listen-address = Host/address to listen for XDMCP connections (use all addresses if not present)

key = Authentication key to use for XDM-AUTHENTICATION-1 or blank to not use authentication (stored in keys.conf)

hostname = Hostname to report to XDMCP clients (defaults to system hostname if unset)

The authentication key is a 56 bit DES key specified in hex as 0xnnnnnnnnnnnnnn. Alternatively

it can be a word and the first 7 characters are used as the key.

[XDMCPServer]
#enabled=false
#port=177
#listen-address=
#key=
#hostname=

VNC Server configuration

enabled = True if VNC connections should be allowed

command = Command to run Xvnc server with

port = TCP/IP port to listen for connections on

listen-address = Host/address to listen for VNC connections (use all addresses if not present)

width = Width of display to use

height = Height of display to use

depth = Color depth of display to use

[VNCServer]
#enabled=false
#command=Xvnc
#port=5900
#listen-address=
#width=1024
#height=768
#depth=8

Vielleicht kannste mal drüberschauen

Vielen Dank

sdetweil · Nov 22, 2019, 3:46 PM

if u see the mouse pointer, then this is not a screen saver problem

when u have the black screen, open the developers window, ctrl-shift-i, on the keyboard, and select the tab labeled console and scroll around to see any errors (usually red text)…

the black screen means that one of the modules has crashed in its drawing mode…

pogges · Nov 22, 2019, 4:11 PM

sorry nichts rotes. Ich setz nochmal frisch auf. mit oder ohne pm2?

sdetweil · Nov 22, 2019, 4:36 PM

@pogges u want pm2… the installer will ask to set it up

updated installer here
https://forum.magicmirror.builders/topic/10171/anyone-want-to-try-updated-installer

if only pm2, then use this
https://forum.magicmirror.builders/topic/10907/new-script-to-install-fix-pm2-config-for-start-on-boot

pogges · Dec 1, 2019, 5:52 PM

@sdetweil so new installation with your links, all ok thx